Omega Owners Forum
Chat Area => General Discussion Area => Topic started by: TheBoy on 11 October 2008, 18:48:53
-
...a bit lazy :-[
But did manage to clean out tractor's intercooler, and replace its exhaust - hadn't realised quite how bad it had become. Also managed a tech2 session on a new member's car, took a bit longer than planned - Martin Imber, I suspect you may have a fob repair coming your way shortly ;D
Then I have dropped the Bose shelf again in MV6 to try to diagnose a couple of issues with the ncdr1500 setup. I hope I haven't smoked the telematics unit ::)
-
...a bit lazy :-[
But did manage to clean out tractor's intercooler, and replace its exhaust - hadn't realised quite how bad it had become. Also managed a tech2 session on a new member's car, took a bit longer than planned - Martin Imber, I suspect you may have a fob repair coming your way shortly ;D
Then I have dropped the Bose shelf again in MV6 to try to diagnose a couple of issues with the ncdr1500 setup. I hope I haven't smoked the telematics unit ::)
If I had known TB that you were going to have such an easy day you could have come down South and helped me!! ;D ;D ;D ;D ;D ;)
-
...a bit lazy :-[
But did manage to clean out tractor's intercooler, and replace its exhaust - hadn't realised quite how bad it had become. Also managed a tech2 session on a new member's car, took a bit longer than planned - Martin Imber, I suspect you may have a fob repair coming your way shortly ;D
Then I have dropped the Bose shelf again in MV6 to try to diagnose a couple of issues with the ncdr1500 setup. I hope I haven't smoked the telematics unit ::)
If I had known TB that you were going to have such an easy day you could have come down South and helped me!! ;D ;D ;D ;D ;D ;)
with such nice weather, i should have been playing with cars, but spent most of the day buggering around trying to fix my PC as we're running low on cambelt dvds.....
-
but spent most of the day buggering around trying to fix my PC as we're running low on cambelt dvds.....
Talking of which..
Got mine, thanks TB :y.
Is it silent, or should I continue to find out what's wrong with my PC? So far tried Media Player, Real Player and Divx, all silent.
TIA, Jim
-
I had a fairly lazy day after yesterday's migraine but I did manage to give the old girl a good coat of coloured polish :y :y :y
-
but spent most of the day buggering around trying to fix my PC as we're running low on cambelt dvds.....
Talking of which..
Got mine, thanks TB :y.
Is it silent, or should I continue to find out what's wrong with my PC? So far tried Media Player, Real Player and Divx, all silent.
TIA, Jim
Mine was the same but worked fine on a home DVD player.
Try something like Power DVD on your PC :y
-
but spent most of the day buggering around trying to fix my PC as we're running low on cambelt dvds.....
Talking of which..
Got mine, thanks TB :y.
Is it silent, or should I continue to find out what's wrong with my PC? So far tried Media Player, Real Player and Divx, all silent.
TIA, Jim
v6 one has marks dtm giving verbal instructions. 4 pot one, fairly quiet...
-
Try something like Power DVD on your PC :y
Spot on Skruntie. Power DVD works, got sound. Codec issue with the others then... :y
-
Found that Eibach springs are slightly lower than standard snapped springs - very little in it but similar ground clearance now to my Carlton.
TIme to have an accident with cement.
Also found that lowered stiffened Omegas do not roll on roundabouts 8-)
And no complaints about sick feelings
-
...mosty cangeing cam belts, my 3.2 a 1600 focus estate and a mk2 golf gti...ish :y Mums visiting...
-
I have had a 10 hour return train ride, to purchase and collect new laptops :y
-
Thought it was about time I tech2'd the tractor as well, seeing as I do everyone else's, and never my own cars ;D
Was going to do MV6, but got sidetracked into something else more interesting ::)
-
I played in the swamp. Got a couple inch deep layer of rusty nuts and bolts in the bottom of a bucket now. Next step is to remove the swamp. ::) :)
-
Got up, (no really i did) hoovered my bedroom & changed bedding, waited for local ariel co. to quote on 2 digi ariels, went to Markey Marks & met up with Stuy117 & Ian D, did some shopping, gave the Beastie a wash & polish ready for tomorrow & cooked a King Prawn Dhansak.....mmmmm.......
What a rock'n'roll life i lead! ::)
-
Camcover gaskets, oil & filter change, antifreeze change on the silver MV6 which was driven off by its new owner a couple of hours ago :'(
-
Camcover gaskets, oil & filter change, antifreeze change on the silver MV6 which was driven off by its new owner a couple of hours ago :'(
How long did you hold him hostage! :o ;D
-
Camcover gaskets, oil & filter change, antifreeze change on the silver MV6 which was driven off by its new owner a couple of hours ago :'(
How long did you hold him hostage! :o ;D
A while, did a few other things and didn't rush, and of course several coffee breaks had to be taken ::)
-
Camcover gaskets, oil & filter change, antifreeze change on the silver MV6 which was driven off by its new owner a couple of hours ago :'(
How long did you hold him hostage! :o ;D
A while, did a few other things and didn't rush, and of course several coffee breaks had to be taken ::)
Yeah, I remember those. Was the Polish kid the one actually doing the cam covers? :P ;D
-
wake up early .. check around ..everybody sleep including cats..eat something..watch the last night camera records..then go sleep again.. ;D
lunch time wake up..wash 2 cars..ran into the factory for the new short springs..they were not ready yet..go into mechanic friends shop..
stay few hrs..come back home..and night time visit a new neighbour and now come back home..this was my day :-/