Omega Owners Forum
Chat Area => General Discussion Area => Topic started by: humbucker on 10 January 2009, 16:11:02
-
... today saw replacement fog lamp bulb, stripped engine (v6) down to oil cooler to check all was dry and tidy in there (which it is), cleaned breather system out completely, replaced radio antennae adaptor for back of stereo, sold a complete leather interior for an elite and replaced ecc bulbs on both temp control buttons. then started to run out of light so put it all back together again! hoorah! oh and fitted brand new battery to cavalier...
;D
anyone else been working on their omegas in the cold today? whatcha get done?
-
I just rebuilt my cylinder head and fitted the sump. Had to call it a day and get a cuppa, its getting dark :y
-
Just an oil and filter change plus front discs and pads on the facelift.
-
I started to strip engine down for cam belt change and cam cover gasket change. First time working on an omega but thoroughly enjoying it apart from the fact that I have broken 2 parts just trying to get them off!!!
I am a little ham fisted!!
While you are here Mark - Any news on Cam cover gasket set??
-
I started to strip engine down for cam belt change and cam cover gasket change. First time working on an omega but thoroughly enjoying it apart from the fact that I have broken 2 parts just trying to get them off!!!
I am a little ham fisted!!
A hammer is the most powerfull weapon when negotiating with an omega ::)
-
Still no delivery date.....
-
I started to strip engine down for cam belt change and cam cover gasket change. First time working on an omega but thoroughly enjoying it apart from the fact that I have broken 2 parts just trying to get them off!!!
I am a little ham fisted!!
A hammer is the most powerfull weapon when negotiating with an omega ::)
I don't need a hammer I just touch things and they break!
Thanks Mark :y
-
New headlight new low/beam sensor.
-
wasnt working the miggy today.
did a few bits on the puddle jumper today.
new plates, radio replaced, and fixed the rear window wiper.
gutted i cant get my ipod to work though:(
-
Was going to do steering idler but too cold so I replaced the bathroom sink taps and fitted isolation valves
-
I started to strip engine down for cam belt change and cam cover gasket change. First time working on an omega but thoroughly enjoying it apart from the fact that I have broken 2 parts just trying to get them off!!!
I am a little ham fisted!!
A hammer is the most powerfull weapon when negotiating with an omega ::)
[/highlight]
first rule of mechanics, use a hammer,,, secound rule of mechanics, get a bigger hammer :y
-
cam cover gaskets and breather clean with great help from razzo :y
-
6am-12 usual sat rush sh1t at work,
1-6pm transit clutch and tidy my garage up - looks like a bome has had hit it
6 till now warm the break up and eat :)
-
I got tools out and then looked for my big work jacket to find the other half had put it in the half build shed/workshop to cover the chopsaw and its bloody wet through. This meant working in a summer jacket or sitting in nice warm house having a rest listening to football. Hmm warmth and football won im afraid.
Will save work for next weekend!! :D
-
managed to to sort out the door wind noise after reading Mark dtms door how to :y :y .Then buggered up my ignition key .
-
6am-12 usual sat rush sh1t at work,
1-6pm transit clutch and tidy my garage up - looks like a bome has had hit it
6 till now warm the break up and eat :)
Not the dreaded later ones with the faulty DMF's!
-
6am-12 usual sat rush sh1t at work,
1-6pm transit clutch and tidy my garage up - looks like a bome has had hit it
6 till now warm the break up and eat :)
Not the dreaded later ones with the faulty DMF's!
yeah,,,, wont be long ::)