Omega Owners Forum

Chat Area => General Discussion Area => Topic started by: Marie on 17 January 2009, 18:04:48

Title: knew i shouldnt have tinkered today.......
Post by: Marie on 17 January 2009, 18:04:48
well today i thought i would have a look at the rover while it wasnt raining or windy. then wash it. :)

wish i never started....... :'(

look what i found....its not leaking though.
(http://i131.photobucket.com/albums/p313/marieroffey/rover1-1.jpg)
(http://i131.photobucket.com/albums/p313/marieroffey/rover3-1.jpg)
(http://i131.photobucket.com/albums/p313/marieroffey/rover4-1.jpg)

looks like i need to change this soon.

Title: Re: knew i shouldnt have tinkered today.......
Post by: TheBoy on 17 January 2009, 18:12:59
Ah, yes, crap valeo rads ;D

Measure the length of yours, if its the longer type, I may have a Valeo (OEM) copper (or is it bronze) type for good money. Bought in error, mine takes smaller type, go a replacement from adrad cheap, but fittings were a PITA.
Title: Re: knew i shouldnt have tinkered today.......
Post by: dad1uk on 17 January 2009, 18:13:10
It's not leaking know, but looking at it it soon will be.
Get it repaired or changed as soon as possible, cos it's bound to go at the worst possible moment.
 :(
Title: Re: knew i shouldnt have tinkered today.......
Post by: unlucky alf on 17 January 2009, 18:13:26
what do you expect marie, you should never trust a car thats named after a dog ;D ;D
Title: Re: knew i shouldnt have tinkered today.......
Post by: TheBoy on 17 January 2009, 18:15:10
Actually Marie, don't leave it like that - remember the K is tempremental, and glitches on the coolant system can end up with having to take the head off
Title: Re: knew i shouldnt have tinkered today.......
Post by: vauxfan2k on 17 January 2009, 18:15:11
Quote
you should never trust a car thats named after a dog

or exceedingly dodgy budget biscuits... :D
Title: Re: knew i shouldnt have tinkered today.......
Post by: Marie on 17 January 2009, 18:32:14
Quote
Ah, yes, crap valeo rads ;D

Measure the length of yours, if its the longer type, I may have a Valeo (OEM) copper (or is it bronze) type for good money. Bought in error, mine takes smaller type, go a replacement from adrad cheap, but fittings were a PITA.


cheers TB i will measure it tomorrow and get back to you  :y

hopefully its going to fit. saves it gathering dust in your garage :y


and as for the dog comments guys!!!!! stand by!!!!!!!!!!!!!! ill get you back when you least expect it!!!
Title: Re: knew i shouldnt have tinkered today.......
Post by: Marie on 17 January 2009, 18:40:03
Quote
Actually Marie, don't leave it like that - remember the K is tempremental, and glitches on the coolant system can end up with having to take the head off

oh i dont want to leave it but at the mo i havent got the spare cash to buy the rad!  :'(

going to keep a very close eye on it and will have it changed at the end of the month defo when i do every thing else on the car, ful service and cambelt.
Title: Re: knew i shouldnt have tinkered today.......
Post by: TheBoy on 17 January 2009, 18:43:17
Quote
Quote
Actually Marie, don't leave it like that - remember the K is tempremental, and glitches on the coolant system can end up with having to take the head off

oh i dont want to leave it but at the mo i havent got the spare cash to buy the rad!  :'(

going to keep a very close eye on it and will have it changed at the end of the month defo when i do every thing else on the car, ful service and cambelt.
Mrs TheBoy has a cheapie from adrad, around £35 iirc delivered.  OK, you have to bugger about a bit with nuts and bolts to mount it, but thats pretty cheap...
Title: Re: knew i shouldnt have tinkered today.......
Post by: Marie on 17 January 2009, 18:45:36
Quote
Quote
Quote
Actually Marie, don't leave it like that - remember the K is tempremental, and glitches on the coolant system can end up with having to take the head off

oh i dont want to leave it but at the mo i havent got the spare cash to buy the rad!  :'(

going to keep a very close eye on it and will have it changed at the end of the month defo when i do every thing else on the car, ful service and cambelt.
Mrs TheBoy has a cheapie from adrad, around £35 iirc delivered.  OK, you have to bugger about a bit with nuts and bolts to mount it, but thats pretty cheap...

arh might have a look. and see what price my mate can do at the rover garage he gives me my parts at trade price so if you ever need anything give me a bell tb
Title: Re: knew i shouldnt have tinkered today.......
Post by: TheBoy on 17 January 2009, 18:54:21
http://cgi.ebay.co.uk/ROVER-25-1-1i-1-4i-1-6i-1-8i-99-RADIATOR-NEW-73434_W0QQitemZ150143974226QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item150143974226&_trksid=p3286.c0.m14&_trkparms=72%3A1299%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318

http://cgi.ebay.co.uk/rover-200-400-25-45-radiator-non-air-models_W0QQitemZ170293865837QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item170293865837&_trksid=p3286.c0.m14&_trkparms=72%3A1299%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318


This is company I used
http://cgi.ebay.co.uk/ROVER-200-400-214-414-25-MG-CAR-RADIATOR-NEW_W0QQitemZ270330696983QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item270330696983&_trksid=p3286.c0.m14&_trkparms=72%3A1299%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318
which is cheaper than their website http://www.adrad.co.uk
Title: Re: knew i shouldnt have tinkered today.......
Post by: Marie on 17 January 2009, 18:59:07
Cheers T B i had a look earlier didnt find those ones.

my rover is an automatic so none of those are the right ones.

thankyou for looking though its greatly appreciated
Title: Re: knew i shouldnt have tinkered today.......
Post by: TheBoy on 17 January 2009, 19:09:02
Quote
Cheers T B i had a look earlier didnt find those ones.

my rover is an automatic so none of those are the right ones.

thankyou for looking though its greatly appreciated
Look around the items the bottom one has for sale (or look on their shop, then buy same item cheaper from their eGay shop ;D)
Title: Re: knew i shouldnt have tinkered today.......
Post by: Andy B on 17 January 2009, 21:06:33
I still think my remedy would be the best!!  ::)  ::)  :y  :y  :y
Title: Re: knew i shouldnt have tinkered today.......
Post by: Vamps on 17 January 2009, 21:31:50
Quote
I still think my remedy would be the best!!  ::)  ::)  :y  :y  :y

Did that have anything to do with matches and petrol per chance.... :y
Title: Re: knew i shouldnt have tinkered today.......
Post by: Andy B on 18 January 2009, 00:49:34
Quote
Quote
I still think my remedy would be the best!!  ::)  ::)  :y  :y  :y

Did that have anything to do with matches and petrol per chance.... :y

Might have!!!!!!  ::) ::) ::)
In all honesty I've never been behind the wheel of one, but years back, at a training college, they were commenting on how nice it was to have to remove the front of he car to replace the radiator of one of the smaller Rovers  :-?  :-?  :-?.
I was lent a 825/825 once. A truely horrible car! Turning circle was around 100ft .... and under steered for fun!  :-? :-? :-? :y
Title: Re: knew i shouldnt have tinkered today.......
Post by: Vamps on 18 January 2009, 01:01:13
Quote
Quote
Quote
I still think my remedy would be the best!!  ::)  ::)  :y  :y  :y

Did that have anything to do with matches and petrol per chance.... :y

Might have!!!!!!  ::) ::) ::)
In all honesty I've never been behind the wheel of one, but years back, at a training college, they were commenting on how nice it was to have to remove the front of he car to replace the radiator of one of the smaller Rovers  :-?  :-?  :-?.
I was lent a 825/825 once. A truely horrible car! Turning circle was around 100ft .... and under steered for fun!  :-? :-? :-? :y

I had an 827 auto for a couple of years, one of the nicest and fastest cars I have had :y bought an 820 manual, what a load of cr*p, awful gearbox :(
Title: Re: knew i shouldnt have tinkered today.......
Post by: TheBoy on 18 January 2009, 10:06:59
Quote
Quote
Quote
I still think my remedy would be the best!!  ::)  ::)  :y  :y  :y

Did that have anything to do with matches and petrol per chance.... :y

Might have!!!!!!  ::) ::) ::)
In all honesty I've never been behind the wheel of one, but years back, at a training college, they were commenting on how nice it was to have to remove the front of he car to replace the radiator of one of the smaller Rovers  :-?  :-?  :-?.
I was lent a 825/825 once. A truely horrible car! Turning circle was around 100ft .... and under steered for fun!  :-? :-? :-? :y
Much like a lot of cars tbh.  Friggin Audi A4 cambelt, front of car and radiator has to come off. rather stupid German designer.

Most Rovers and Austin-Rovers are pretty easy to work on to be honest.
Title: Re: knew i shouldnt have tinkered today.......
Post by: Marie on 18 January 2009, 18:53:53
Quote
Quote
Quote
I still think my remedy would be the best!!  ::)  ::)  :y  :y  :y

Did that have anything to do with matches and petrol per chance.... :y

Might have!!!!!!  ::) ::) ::)
In all honesty I've never been behind the wheel of one, but years back, at a training college, they were commenting on how nice it was to have to remove the front of he car to replace the radiator of one of the smaller Rovers  :-?  :-?  :-?.
I was lent a 825/825 once. A truely horrible car! Turning circle was around 100ft .... and under steered for fun!  :-? :-? :-? :y



and i thought we were friends !!!!!!!!!!!!!!!!!!!!!!!!!!!!

i cannot and will not set fire to it!!!!!!!!!!! ;D ;D ;D ;D