Omega Owners Forum
Chat Area => General Discussion Area => Topic started by: JamesV6CDX on 07 March 2009, 17:59:54
-
I'm not considering buying a local 3.0 Manual MV6 that needs a few easy jobs doing, as a toy. I'm really not.
Anyhow, back on topic. Are these the correct wheels, for a Facelift MV6?
(http://i18.ebayimg.com/02/i/001/36/e6/ed37_3.JPG)
-
Well they're the right shape -round! :D
-
no there irmscher softstars 16" mv6 should have 17" flat spokes :(
-
no there irmscher softstars 16" mv6 should have 17" flat spokes :(
Still nice wheels though, no? ::)
-
no there irmscher softstars 16" mv6 should have 17" flat spokes :(
Still nice wheels though, no? ::)
there ok but makes it look like a pre face reflection ! thats what they came on and tourers :y
-
(http://i1.ebayimg.com/03/i/001/36/e7/0231_3.JPG)
-
(http://i290.photobucket.com/albums/ll262/m1ct/CIMG2314-1.jpg)
this is FL mv6 alloy :)
16in Softstars were on mini fl elites
-
Now you mention it mate you're right - I recognise 'em.
What a bummer. Hopefully will keep the cost down, though ::)
-
ANy good?
-
ANy good?
What, the car?
Looks great. Very tidy with full MOT. Being sold as spares and repairs, 'cos engine is smoking from NS manifold. ;)
-
That wont be the first or probably the last MV6 with soft stars Ive seen,
there was an estate recently on ebay with them on aswell.
-
ANy good?
What, the car?
Looks great. Very tidy with full MOT. Being sold as spares and repairs, 'cos engine is smoking from NS manifold. ;)
[tr][/tr]
aye seen that for sale nice cam cover gasket job james !! :y :y
-
ANy good?
What, the car?
Looks great. Very tidy with full MOT. Being sold as spares and repairs, 'cos engine is smoking from NS manifold. ;)
[tr][/tr]
aye seen that for sale nice cam cover gasket job james !! :y :y
Not really in the market, wouldn't have been interested if it meant travelling to get it.
But, it's 10 miles up the road :-X
-
they are from Pre-facelift Reflection model
-
they are from Pre-facelift Reflection model
Thanks for clarification mate :y
-
ANy good?
What, the car?
Looks great. Very tidy with full MOT. Being sold as spares and repairs, 'cos engine is smoking from NS manifold. ;)
[tr][/tr]
aye seen that for sale nice cam cover gasket job james !! :y :y
Not really in the market, wouldn't have been interested if it meant travelling to get it.
But, it's 10 miles up the road :-X
Cardiff or Gloucestershire?
-
Sheepland...
-
Sheepland...
Not what I was thinking then ;D
-
you'd much rather have a nice tractor elite... ;D
-
Think the ebay page was posted on here, maybe i did, can't remember. Could only be a cam cover gasket, rest of the car looked peachy, 3.0 manuals are worth hanging on to.
Might even be able to knock him down a tad 'coz of the wheels. :y
-
you'd much rather have a nice tractor elite... ;D
Are you thinking of selling, then?
-
.....
16in Softstars were on mini fl elites
No they weren't.
Tthese were .....
(http://i84.photobucket.com/albums/k17/Tiff4327/Image018.jpg)
-
How stable is that car andy? ::)
-
Now you mention it mate you're right - I recognise 'em.
What a bummer. Hopefully will keep the cost down, though ::)
There's these (http://cgi.ebay.co.uk/Vauxhall-Omega-Elite-Alloy-Wheel-Set_W0QQitemZ250377902678QQcmdZViewItemQQptZUK_CarParts_Acc_Wheels_tyres_Rims_Car_Wheels_ET?hash=item250377902678&_trksid=p3286.c0.m14&_trkparms=72%3A1683%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318) if you're quick.
They'd better go up a bit in price though ..... I paid more than twice that. :'(
-
you'd much rather have a nice tractor elite... ;D
Are you thinking of selling, then?
It was a project car, its always for sale ;). Or swaps for the right car ;D
-
How stable is that car andy? ::)
It was very! Two ramps and a pair of 6 tonnes stands! It took some pigging about getting it there though. ;) ;D
-
it went for £670 in the end...wish i`d had the dosh to bid on it :(
-
it went for £670 in the end...wish i`d had the dosh to bid on it :(
I was outbid by 30 quid.... I am well chessed off :(
-
It looked a real cracking motor i saw it the other day along with the 1 in peterborough that was at £300 this afternoon....they always come when your skint or otherwise financally burdened....lol
-
SORRY james i won it. Bit more of a drive for me to get it though.
lee
-
It looked a real cracking motor i saw it the other day along with the 1 in peterborough that was at £300 this afternoon....they always come when your skint or otherwise financally burdened....lol
I could afford to buy it - I was outbid in the last 10 seconds - BAH >:(
-
its funny actually i was thinking if could get enough dosh together i was gonna bid on it and if i won it give you a call and ask about a mobile cam cover fitting session... ;D ;D
-
It looked a real cracking motor i saw it the other day along with the 1 in peterborough that was at £300 this afternoon....they always come when your skint or otherwise financally burdened....lol
I could afford to buy it - I was outbid in the last 10 seconds - BAH >:(
As i said im sorry but it makes me feel alot better knowing you were interested in it as well.
lee
-
Well lee it looks like you get a cracking motor for your money and i`m sure james wont hold it against you....I might though... ::) ;D ;D ;D ;D
-
well as iv'e only got a 2.0 i needed a upgrade. At least i wont be at the bottom of the pile now with a (poverty spec) car
-
well as iv'e only got a 2.0 i needed a upgrade. At least i wont be at the bottom of the pile now with a (poverty spec) car
Well done mate
No hard feelings at all, I didn't even know you were bidding!
Pop in for a cuppa (and show me what I missed) on your way home if you like :y
-
well as iv'e only got a 2.0 i needed a upgrade. At least i wont be at the bottom of the pile now with a (poverty spec) car
Well done mate
No hard feelings at all, I didn't even know you were bidding!
Pop in for a cuppa (and show me what I missed) on your way home if you like :y
Just might do that as i could do with meeting a few more oofers pm me your post code and if i get chance i will. :y
lee
-
You can quote him on the jobs that will need doing james.... ;)
-
You can quote him on the jobs that will need doing james.... ;)
It's only a camcover gasket, Lee will sort that no probs :y
-
Upshot is another nice manual MV6 is now on the forum. :y
-
You can quote him on the jobs that will need doing james.... ;)
It's only a camcover gasket, Lee will sort that no probs :y
Its only a gasket at the moment but im sure there will be many more things that need to be done soon ;D :-[
-
Now you mention it mate you're right - I recognise 'em.
What a bummer. Hopefully will keep the cost down, though ::)
There's these (http://cgi.ebay.co.uk/Vauxhall-Omega-Elite-Alloy-Wheel-Set_W0QQitemZ250377902678QQcmdZViewItemQQptZUK_CarParts_Acc_Wheels_tyres_Rims_Car_Wheels_ET?hash=item250377902678&_trksid=p3286.c0.m14&_trkparms=72%3A1683%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318) if you're quick.
They'd better go up a bit in price though ..... I paid more than twice that. :'(
Bugger!! They went for bugger all! :'( I paid nearly twice that, although mine were very local to me.
-
They are Irmscher Softstar wheels