Omega Owners Forum
Chat Area => General Discussion Area => Topic started by: hotel21 on 19 January 2007, 01:33:48
-
Recall that the (M-Tek?) chipping opportunities for the 3.2 are much less than the 3.0 . Anyone confirm?
What options (without breaking the bank) are there for the later facelifts?
B
-
At this time that is the case. I know that Mike was looking to see if anyone was developing an improved map for the 3.2
Tuning?
Well it is a hardened steel crank so can cetainly take a lot more.
I would look at the exhaust manifolds (sorry Kostas). I just think there is too much restriction there.
An FPR won't do any harm. Won't increase power but will improve delivery.
Other main thought would be a supercharger! :D
-
The ECU is flashable. Downside of this is that it is harder for the mapper to protect their IP. I haven't seen any 3rd party firmwares/maps yet...
-
you thinking of changing your car Broocie ?
-
you thinking of changing your car Broocie ?
yup.
see thread 'conversation piece'.
-
At this time that is the case. I know that Mike was looking to see if anyone was developing an improved map for the 3.2
Tuning?
Well it is a hardened steel crank so can cetainly take a lot more.
I would look at the exhaust manifolds (sorry Kostas). I just think there is too much restriction there.
An FPR won't do any harm. Won't increase power but will improve delivery.
Other main thought would be a supercharger! :D
I also believe that the manifolds are to small for the capacity of the engine and you would probably be better off with a proper set of tubular manifolds. Like the ones in my 3.2 beast.
-
Re the manifolds. Were they on the car when purchased or did you fit them? If the latter, what kind of cost and who/what make? Any info gratefully received.
B
-
Re the manifolds. Were they on the car when purchased or did you fit them? If the latter, what kind of cost and who/what make? Any info gratefully received.
B
Oups,
appologies i didn't make it clear, the nice tubular manifolds are in my 156 GTA ;)
for the omega i think Imotecgmbh have a solution,
-
Link?
Oh, and stop gloating about owning a 156 GTA! ;D
-
Link?
Oh, and stop gloating about owning a 156 GTA! ;D
;D ;D ;D ;D
http://www.imotecgmbh.de/
-
Like it, you have a choice of languages on the site. German...or....German!
I was useless at German...and still am!
However, they have some interesting kit on there.
Weird airbox setup, oh and some rather agressive 284° Cams! :o
-
Like it, you have a choice of languages on the site. German...or....German!
I was useless at German...and still am!
However, they have some interesting kit on there.
Weird airbox setup, oh and some rather agressive 284° Cams! :o
Yes it is a very diverse website when it comes to languages.
Fächerkrümmer means exhaust manifold.
-
they have some interesting kit on there.
Weird airbox setup, oh and some rather agressive 284° Cams! :o
Think I might take some time to look through it.
Credit card at the ready!!! :y
-
Most manifolds only fit LHD cars.