Omega Owners Forum

Chat Area => General Discussion Area => Topic started by: Craig_R on 24 February 2007, 22:13:29

Title: Top Guys At The 4 Pot Cam Party
Post by: Craig_R on 24 February 2007, 22:13:29

Just want to post about how nice it was to see and say Hi to the people at Tunnies Cam Party

Everyone was Great, picked up a few great tips.

James his Mate were Work Horse's on the Cam belts 4 Pot & V6

Thanks Taxi Driver for Having alook for the Codes and Plugging in your tech2 to my Megga.

Sorry I had to Run When I did and did not make it over to the V6 Party, Had a Great Time   :y

Craig

Title: Re: Top Guys At The 4 Pot Cam Party
Post by: Taxi_Driver on 24 February 2007, 22:54:46

Quote

Thanks Taxi Driver for Having alook for the Codes and Plugging in your tech2 to my Megga.

Craig

Cheapo tech2  ;)

iirc it came up with lambda sensor fault.....we had a look and could see only one lambda sensor on the 2.0.....is this correct? coz ive 2 on my 2.2?... :-/

Also just remembered....plugged it into Tunnies 2.2....apart from wierd code from throttle position sensor.....it also came up up with lambda sensor 2 faulty  :-/

Title: Re: Top Guys At The 4 Pot Cam Party
Post by: Martin_1962 on 24 February 2007, 23:23:19

1 sensor on 2.0

Title: Re: Top Guys At The 4 Pot Cam Party
Post by: Craig_R on 25 February 2007, 22:11:46

Yep That's all I found today when I had it Jacked Up one Four Lead Lambda

Checked out the Cables As The Boy Told Me to do and all the Cables Seemed fine,

Did Find a Cable Spliced in to one of the cables to the Lambds Sensor But Found Out
This was to do with My LPG as the cable ran to my LPG ECU which I guess makes sence
as the LPG ECU would need to know the reading from the Lambda sensor.

But Looks Like Ill be needing a new Lambda Sensor.

Taxi Driver Can you remember the Pins I needed to check it out ?

Craig