Omega Owners Forum

Chat Area => General Discussion Area => Topic started by: TheBoy on 19 February 2007, 13:10:59

Title: V6 Cambelt party - Brackley
Post by: TheBoy on 19 February 2007, 13:10:59
If anyone's v6 cambelt is due, there is going to be a v6 cambelt party in Brackley this Saturday.  

Numbers are going to have to be limited do to space/time restrictions though.

Any experts at v6 cambelts prepared to lend a hand are also very welcome ;)

If you have a 4 pot Omega that needs one, see Tunnie's 2.2 cambelt party thread, being held on same day about 1/2 mile away.

Depending on numbers, we will have the BBQ on, and beer (for those local/staying/passengers)...  ...hopefully, those from Tunnie's 4 pot cambelt bash will pop along later as well :y

Please reply to this thread if your are interested in coming, and whether its to lend a hand, get your cambelt changed, or just want to pop in to say hello.

As said, places are likely to be limited.
Title: Re: V6 Cambelt party - Brackley
Post by: theolodian on 19 February 2007, 13:18:06
Happy to help and do food, not local so no beer  :'(
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 19 February 2007, 13:28:14
Quote
Happy to help and do food, not local so no beer  :'(
Soft drinks for you then ;)

There will be plenty of fizzy drinks as well...
Title: Re: V6 Cambelt party - Brackley
Post by: theolodian on 19 February 2007, 13:31:01
Quote
Quote
Happy to help and do food, not local so no beer  :'(
Soft drinks for you then ;)

There will be plenty of fizzy drinks as well...
I can bring whatever.  Speaking of, how much would you pay me to NOT bring that laptop?  ;) ;D









(Don't worry, it's mothballed until I can figure out how to put Debian or Ubuntu on it.)
Title: Re: V6 Cambelt party - Brackley
Post by: Auto Addict on 19 February 2007, 13:32:35
...but no Mrs TheBoy....so will the bacon butties be sub-standard..... ::)
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 19 February 2007, 13:37:54
Quote
...but no Mrs TheBoy....so will the bacon butties be sub-standard..... ::)
Hence why BBQ will be out ;)
Title: Re: V6 Cambelt party - Brackley
Post by: Auto Addict on 19 February 2007, 13:42:51
Quote
Quote
...but no Mrs TheBoy....so will the bacon butties be sub-standard..... ::)
Hence why BBQ will be out ;)
Good thinking... :y
Title: Re: V6 Cambelt party - Brackley
Post by: theolodian on 19 February 2007, 13:47:28
Quote
Quote
Quote
...but no Mrs TheBoy....so will the bacon butties be sub-standard..... ::)
Hence why BBQ will be out ;)
Good thinking... :y
Wait, are you sure?  Visions of my burger being Sammy Sledgehammer'ed  :o
Title: Re: V6 Cambelt party - Brackley
Post by: Markjay on 19 February 2007, 13:56:08
Can't make it myself (my cambelt does not need doing, would have joined for the food and ale ;), but I am working this Saturday on a customer’s site in Suffolk  :( ), I wish you all a great day!  :y
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 19 February 2007, 13:58:55
Quote
Quote
Quote
Quote
...but no Mrs TheBoy....so will the bacon butties be sub-standard..... ::)
Hence why BBQ will be out ;)
Good thinking... :y
Wait, are you sure?  Visions of my burger being Sammy Sledgehammer'ed  :o
Sammy Sledge has disappeared. Or Mrs TheBoy has hidden it for some reason ::)
Title: Re: V6 Cambelt party - Brackley
Post by: MaxV6 on 19 February 2007, 14:21:59
I'll be there, and I can, and will, Do all sorts of evil and yummy butties, BBQ goodies and general victualling of hard working saintly types.,

oh, and a lot of cleaning of parts.....  


It'll be good to put names and faces to Avatars and ID's/.

I'll also bring some Beer....  but won't be drinking it.. ....  

Empty seats in my car are happily offered to any other of TB's (or indeed Tunnie's) guests coming from even remotely enroute...




Max
Title: Re: V6 Cambelt party - Brackley
Post by: AndersH on 19 February 2007, 15:05:31
I have a cambelt that needs doing, can I come?!
Title: Re: V6 Cambelt party - Brackley
Post by: JamesV6CDX on 19 February 2007, 15:10:32
I am going to be changing 4 pot belts at Tunnies in the morning...

But we are definately coming over to show our faces, meet some members and help out straight after ;D
Title: Re: V6 Cambelt party - Brackley
Post by: Admin on 19 February 2007, 17:20:29
Well I'll be there as I won't miss an opportunity to meet up with you all. :)
Title: Re: V6 Cambelt party - Brackley
Post by: theolodian on 19 February 2007, 17:24:30
Quote
Well I'll be there as I won't miss an opportunity to meet up with you all. :)
That would be Messrs Stella, Carling et al?  :P
Title: Re: V6 Cambelt party - Brackley
Post by: Admin on 19 February 2007, 17:27:33
Also if anyone needs any parts, let me know and I can get them at TC price and bring them down.

EG. Box of semi synth is £22.50 + vat = £26.44. Filters £1.11 + vat etc...
Title: Re: V6 Cambelt party - Brackley
Post by: Bo Bo on 19 February 2007, 18:31:14
If I wasn't going down to Mickdundee's I'd be there..........
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 19 February 2007, 18:37:52
Quote
Also if anyone needs any parts, let me know and I can get them at TC price and bring them down.

EG. Box of semi synth is £22.50 + vat = £26.44. Filters £1.11 + vat etc...
I think you may find that oil has crept up a little this year, its now around £30 for the 4 x 5l offer...

I may need you to get waterpump for MaxV6, as boogered if I can get one around here. I'll let you know...
Title: Re: V6 Cambelt party - Brackley
Post by: BazMV6 on 19 February 2007, 18:38:39
I'd like to pop in to say "Hello".  Might have all 4 wheels going in a straight line by then, hopefully.  :)
Cambelt was supposedly done before I bought - would welcome any comments on evidence to support this!

Which bit of Brackley?  Was at the leisure centre last Sat...
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 19 February 2007, 18:39:02
Quote
I have a cambelt that needs doing, can I come?!
Blimey, thats a fair old trek ;)

What needs doing?
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 19 February 2007, 18:39:57
Quote
I'd like to pop in to say "Hello".  Might have all 4 wheels going in a straight line by then, hopefully.  :)
Cambelt was supposedly done before I bought - would welcome any comments on evidence to support this!

Which bit of Brackley?  Was at the leisure centre last Sat...
Near the new rugby club, not far from newish leisure centre...
Title: Re: V6 Cambelt party - Brackley
Post by: Kevin Wood on 19 February 2007, 18:53:56
Hi All,

I wouldn't mind coming along to say Hi as I'm a new forum member.

I bought my Omega about 6 weeks ago. I bought it at just under 42,000 and it was serviced by the dealer from whom I purchased it. They have stamped the book and indicated the cambelt and pullies were changed but if there's time a quick exploratory peek under the covers to check the condition of the belt would be good as I am wary of trusting 2nd hand car dealers. It would also be good to see the procedure carried out as I will be servicing it myself in future.

I'd also be interested, again, if time permits, in enabling the cruise control if there'll be a Tech2 to hand as I'd like to change the stalk to one with the cruise buttons on it in the near future. I might even be able to source a stalk before the weekend.

Cheers,

Kevin
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 19 February 2007, 18:57:20
Quote
Hi All,

I wouldn't mind coming along to say Hi as I'm a new forum member.

I bought my Omega about 6 weeks ago. I bought it at just under 42,000 and it was serviced by the dealer from whom I purchased it. They have stamped the book and indicated the cambelt and pullies were changed but if there's time a quick exploratory peek under the covers to check the condition of the belt would be good as I am wary of trusting 2nd hand car dealers. It would also be good to see the procedure carried out as I will be servicing it myself in future.

I'd also be interested, again, if time permits, in enabling the cruise control if there'll be a Tech2 to hand as I'd like to change the stalk to one with the cruise buttons on it in the near future. I might even be able to source a stalk before the weekend.

Cheers,

Kevin
Tech2 will be available, for pricelist, see my post at top of every section...
Title: Re: V6 Cambelt party - Brackley
Post by: tunnie on 19 February 2007, 19:19:58
Quote
I'd like to pop in to say "Hello".  Might have all 4 wheels going in a straight line by then, hopefully.  :)
Cambelt was supposedly done before I bought - would welcome any comments on evidence to support this!

Which bit of Brackley?  Was at the leisure centre last Sat...

Hey Baz, 4 pot party at mine (well parents house!)

Sure you and my dad can catch up.... I remember you from my placement i did when i was at school!

Did you get your discs done in the end? Sure could fit those in too!   :y
Title: Re: V6 Cambelt party - Brackley
Post by: sir moanalot on 19 February 2007, 19:28:50
bugger, id love to pop along and stuff my face, view the greasy elbows and learn something but my companies got something planned for me! i will try and get to the next meet though.
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 19 February 2007, 19:32:49
Quote
bugger, id love to pop along and stuff my face, view the greasy elbows and learn something but my companies got something planned for me! i will try and get to the next meet though.
nah, sod work ;)
Title: Re: V6 Cambelt party - Brackley
Post by: tunnie on 19 February 2007, 19:36:34
Quote
Quote
bugger, id love to pop along and stuff my face, view the greasy elbows and learn something but my companies got something planned for me! i will try and get to the next meet though.
nah, sod work ;)

Absolutely.... pull a sicky  ;)
Title: Re: V6 Cambelt party - Brackley
Post by: AndersH on 19 February 2007, 19:48:53
Quote
Quote
I have a cambelt that needs doing, can I come?!
Blimey, thats a fair old trek ;)

What needs doing?

Yeah, about 120 miles! I need my cambelt doing, was wondering if anyone could also point me towards where some steering problems might be coming from. I also would like to install cruise at some point so would like someone to show me roughly where everything goes!
It would still work out cheaper to get the belt and water pump done this way and I'd love to see how it's done and get involved. I knew nothing about cars until joining this forum and now I just want to learn more and more  :P
So if it's ok with everyone I'd like to pop over.
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 19 February 2007, 19:50:10
So, currently we have the following experts lending a hand:
Marks_DTM_Calib
Laidback66
Me (expert in the loose sense ;))

And the following coming:
MaxV6 (confirmed) - Cambelt, waterpump, handbrake
Theolodian (probable) - HID fix
Manbafia (unknown) - Cambelt?
BazMV6 (unknown) - a check over
Kevin Wood (unknown) - Cruise enable

Those above please confirm if you're coming, and confirm the list above is correct please.
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 19 February 2007, 19:51:01
Quote
Quote
Quote
I have a cambelt that needs doing, can I come?!
Blimey, thats a fair old trek ;)

What needs doing?

Yeah, about 120 miles! I need my cambelt doing, was wondering if anyone could also point me towards where some steering problems might be coming from. I also would like to install cruise at some point so would like someone to show me roughly where everything goes!
It would still work out cheaper to get the belt and water pump done this way and I'd love to see how it's done and get involved. I knew nothing about cars until joining this forum and now I just want to learn more and more  :P
So if it's ok with everyone I'd like to pop over.

No problem, will be pleased to see you.
Title: Re: V6 Cambelt party - Brackley
Post by: tunnie on 19 February 2007, 19:53:35
Quote
Quote
I have a cambelt that needs doing, can I come?!
Blimey, thats a fair old trek ;)

What needs doing?

Just a quick run around the block in an Omega!  :D
Title: Re: V6 Cambelt party - Brackley
Post by: AndersH on 19 February 2007, 20:04:03
Quote
Quote
Quote
I have a cambelt that needs doing, can I come?!
Blimey, thats a fair old trek ;)

What needs doing?

Just a quick run around the block in an Omega!  :D

Exactly! any old excuse to bomb up the motorway in the Omega! Also, I wouldn't mind someone else driving mine or sitting in someone else's. People always talk about how quiet their Omegas are - mine certainly isn't to me!
Anyway I've ordered a cambelt kit and water pump - I may even stretch to a gearbox upgrade if Tech2's making an appearance, sounds worth it reading the post about it.
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 19 February 2007, 20:09:54
So, currently we have the following experts lending a hand:
Marks_DTM_Calib
Laidback66
Me (expert in the loose sense ;))

And the following coming:
MaxV6 (confirmed) - Cambelt, waterpump, handbrake, HID fix - Parts, I will get
Theolodian (probable) - HID fix - Parts, N/A
Manbafia (Confirmed) - Cambelt, waterpump - Parts, member will get
BazMV6 (unknown) - a check over - Parts, N/A
Kevin Wood (unknown) - Cruise enable - Parts, member will get stalk.

Those above please confirm if you're coming, and confirm the list above is correct please.
Title: Re: V6 Cambelt party - Brackley
Post by: Bo Bo on 19 February 2007, 20:45:57
If I don't hear from Elite Pete soon, I'll be able to pop round too.........
Title: Re: V6 Cambelt party - Brackley
Post by: Kevin Wood on 19 February 2007, 20:55:37
Quote
Tech2 will be available, for pricelist, see my post at top of every section...

OK. That's great. I'll be there.

Quote
I also would like to install cruise at some point so would like someone to show me roughly where everything goes!

Well, I've got the stalk on order so if that's arrived by the weekend I'll bring it along and we can see if we can muddle our way through it I guess!

Cheers,

Kevin
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 19 February 2007, 21:01:45
Quote
Quote
Tech2 will be available, for pricelist, see my post at top of every section...

OK. That's great. I'll be there.

Quote
I also would like to install cruise at some point so would like someone to show me roughly where everything goes!

Well, I've got the stalk on order so if that's arrived by the weekend I'll bring it along and we can see if we can muddle our way through it I guess!

Cheers,

Kevin
Yup, no problem. Just ensure the stalk is the 4 wire variant (the common one), not the 2 wire one as used on 2.5TD Omegas...
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 19 February 2007, 21:02:30
So, currently we have the following experts lending a hand:
Marks_DTM_Calib
Laidback66
Me (expert in the loose sense ;))

And the following coming:
MaxV6 (confirmed) - Cambelt, waterpump, handbrake, HID fix - Parts, I will get
Theolodian (probable) - HID fix - Parts, N/A
Manbafia (Confirmed) - Cambelt, waterpump - Parts, member will get
BazMV6 (unknown) - a check over - Parts, N/A
Kevin Wood (Confirmed) - Cruise enable - Parts, member will get stalk.

Those above please confirm if you're coming, and confirm the list above is correct please.
Title: Re: V6 Cambelt party - Brackley
Post by: tunnie on 19 February 2007, 21:05:03
Quote
Quote
Tech2 will be available, for pricelist, see my post at top of every section...

OK. That's great. I'll be there.

Quote
I also would like to install cruise at some point so would like someone to show me roughly where everything goes!

Well, I've got the stalk on order so if that's arrived by the weekend I'll bring it along and we can see if we can muddle our way through it I guess!

Cheers,

Kevin


Cruise stalk on facelift Omega's are a piece of piss, really are!

5 min job, 2 mins on tech2. Done. Best mod I ever had done on mine, and it was a £300 factory fit option!  :o
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 19 February 2007, 21:11:06
Quote
Quote
Quote
Tech2 will be available, for pricelist, see my post at top of every section...

OK. That's great. I'll be there.

Quote
I also would like to install cruise at some point so would like someone to show me roughly where everything goes!

Well, I've got the stalk on order so if that's arrived by the weekend I'll bring it along and we can see if we can muddle our way through it I guess!

Cheers,

Kevin


Cruise stalk on facelift Omega's are a piece of piss, really are!

5 min job, 2 mins on tech2. Done. Best mod I ever had done on mine, and it was a £300 factory fit option!  :o
Fitting the stalk is easy - 5 screws. Enabling it in the ECU is a little more challenging, unless you have a tech2 ;)
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 19 February 2007, 21:11:49
Quote
Quote
Tech2 will be available, for pricelist, see my post at top of every section...

OK. That's great. I'll be there.

Quote
I also would like to install cruise at some point so would like someone to show me roughly where everything goes!

Well, I've got the stalk on order so if that's arrived by the weekend I'll bring it along and we can see if we can muddle our way through it I guess!

Cheers,

Kevin
Is it an auto or manual?
Title: Re: V6 Cambelt party - Brackley
Post by: MikeDundee on 19 February 2007, 21:15:17
Quote
Quote
Quote
Tech2 will be available, for pricelist, see my post at top of every section...

OK. That's great. I'll be there.

Quote
I also would like to install cruise at some point so would like someone to show me roughly where everything goes!

Well, I've got the stalk on order so if that's arrived by the weekend I'll bring it along and we can see if we can muddle our way through it I guess!

Cheers,

Kevin


Cruise stalk on facelift Omega's are a piece of piss, really are!

5 min job, 2 mins on tech2. Done. Best mod I ever had done on mine, and it was a £300 factory fit option!  :o

Any camping facilities in NN14?, I ma an expert lager drinker, malt whiskey Oh and BBQ professional :y
Title: Re: V6 Cambelt party - Brackley
Post by: MaxV6 on 19 February 2007, 21:31:51
Quote
Quote
Tech2 will be available, for pricelist, see my post at top of every section...

OK. That's great. I'll be there.

Quote
I also would like to install cruise at some point so would like someone to show me roughly where everything goes!

Well, I've got the stalk on order so if that's arrived by the weekend I'll bring it along and we can see if we can muddle our way through it I guess!

Cheers,

Kevin

if it hasn't arrived, I have an old spare used one somewhere or other, let me know before too late on friday eh?  you're welcome to it...

Failing that i have a fairly new one on the Sintra, which isn't in use right now...  I could whip that off and you can simply swap it out for your shiny new one when it does finally arrive.. and return my one from the Sintra (yes they are the same part....   I discovered this... when I had my brake light switch replaced last year, they fitted the wrong one and my cruise stopped working....  after being charged a couple of hours for "diagnostic investigation" without remedying the sudden failure of cruise control after the service , I swapped the stalk out....    then the switch ( with contortionist assistance from a friend ) , needless to say the general manager got a snotty letter and I won;t use that garage again....


That way you'll at least be able to ,make the most of the weekend's events...

Max
Title: Re: V6 Cambelt party - Brackley
Post by: SteveD on 19 February 2007, 21:40:34
You can list me as a maybe. I can't confirm until Friday because of kids football comittments. Don't need anything doing but would like to come say hello and maybe get gearbox upgrade if time permits.  :)
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 19 February 2007, 21:42:03
So, currently we have the following experts lending a hand:
Marks_DTM_Calib
Laidback66
Me (expert in the loose sense ;))

And the following coming:
MaxV6 (confirmed) - Cambelt, waterpump, handbrake, HID fix - Parts, I will get
Theolodian (probable) - HID fix - Parts, N/A
Manbafia (Confirmed) - Cambelt, waterpump - Parts, member will get
BazMV6 (unknown) - a check over - Parts, N/A
Kevin Wood (Confirmed) - Cruise enable - Parts, member will get stalk.
SteveD (Possible) - Autobox s/w update - Parts, N/A

Those above please confirm if you're coming, and confirm the list above is correct please.
Title: Re: V6 Cambelt party - Brackley
Post by: theolodian on 19 February 2007, 21:51:40
Yeah put me down for confirmed.  I'm also interested in a g/b update, etc. but not anything that requires parts.  When is this all kicking off?
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 19 February 2007, 22:23:27
So, currently we have the following experts lending a hand:
Marks_DTM_Calib
Laidback66
Me (expert in the loose sense ;))

And the following coming:
MaxV6 (confirmed) - Cambelt, waterpump, handbrake, HID fix - Parts, I will get
Theolodian (Confirmed) - HID fix, G/box update - Parts, N/A
Manbafia (Confirmed) - Cambelt, waterpump - Parts, member will get
BazMV6 (unknown) - a check over - Parts, N/A
Kevin Wood (Confirmed) - Cruise enable - Parts, member will get stalk.
SteveD (Possible) - Autobox s/w update - Parts, N/A

Those above please confirm if you're coming, and confirm the list above is correct please.
Title: Re: V6 Cambelt party - Brackley
Post by: sounds2k on 19 February 2007, 22:39:00
well I'm gonna order the cam cover gaskets etc. from a local Vx dealer tomorrow, am hoping to maybe take a day off later this week (probably Thursday as it looks to be rain-free  :o) to change those (my first time doing 'em  :-/). So assuming that goes well, a little 120-odd mile run each way to Brackley could be on the cards ... I'll make sure I've got oil with me just in case !

I'd like to get the gearbox update done, I can bring my V6 locking kit so that means another car can be done at the same time, if the cam cover gaskets don't fix the leak then other opinions on the cause would be welcome  ;)

I'll be bringing my Halfrauds trade card in case it comes in handy  :)
Title: Re: V6 Cambelt party - Brackley
Post by: Kevin Wood on 19 February 2007, 22:39:44
Quote
if it hasn't arrived, I have an old spare used one somewhere or other, let me know before too late on friday eh?  you're welcome to it...
 
Failing that i have a fairly new one on the Sintra, which isn't in use right now...
 
That way you'll at least be able to ,make the most of the weekend's events...

Thanks for that, MaxV6. I will let you know later in the week. I should have asked around here before ordering one.

Thinking of brake light switches, I wonder if I'll need to change mine? IIRC, the cruise control one has 4 pins and the non-cruise one only 2?

Kevin
Title: Re: V6 Cambelt party - Brackley
Post by: SteveD on 20 February 2007, 00:07:30
If i'm able to make it I will have a couple of spare seats so anyone from this end wants a ride let me know.
Title: Re: V6 Cambelt party - Brackley
Post by: hotel21 on 20 February 2007, 02:27:01
Simply for the idea of a meet up, its a bit of a trek, but might be willing to stretch the beasties legs southwards from Jolly Scotland.  Someone wants to share fuel costs?  Also, like MickDundee, willing to throw a tent up somewhere and doss out under canvas.  

You got a big back garden?     ;D ;D ;D
Title: Re: V6 Cambelt party - Brackley
Post by: Marks DTM Calib on 20 February 2007, 08:19:33
Quote
Quote
if it hasn't arrived, I have an old spare used one somewhere or other, let me know before too late on friday eh?  you're welcome to it...
 
Failing that i have a fairly new one on the Sintra, which isn't in use right now...
 
That way you'll at least be able to ,make the most of the weekend's events...

Thanks for that, MaxV6. I will let you know later in the week. I should have asked around here before ordering one.

Thinking of brake light switches, I wonder if I'll need to change mine? IIRC, the cruise control one has 4 pins and the non-cruise one only 2?

Kevin

I have a brand new one spare in my box of bits that I will bring just in case....yours at cost (10 quid) if we need it

Note, I will bring all the odds and sods I have lying about (with the exception of cylinder heads etc!) which members can help themselves to if they need anything....
Title: Re: V6 Cambelt party - Brackley
Post by: Phil on 20 February 2007, 08:45:36
I have:-

V6 Omega
V6 cambelt and tensioner kit
V6 cam locking kit

No confidence to do it myself!!

If theres any space i'd like to pop up, and if anyone can help me out with a water pump it would be most appreciated  :)
Title: Re: V6 Cambelt party - Brackley
Post by: Bo Bo on 20 February 2007, 09:06:35
This is getting busy!
Wondering if there's time/space to fit in rocker gaskets & breathers clean as well?
Title: Re: V6 Cambelt party - Brackley
Post by: Marks DTM Calib on 20 February 2007, 09:10:56
Two cambelt changes (possibly three), rear brakes, a few general health checks......should just about be able to squeeze a set of cam cover gaskets in....
Title: Re: V6 Cambelt party - Brackley
Post by: Bo Bo on 20 February 2007, 09:33:27
Quote
Two cambelt changes (possibly three), rear brakes, a few general health checks......should just about be able to squeeze a set of cam cover gaskets in....
That would be cool & at some point maybe someone with nimble hands can help with changing my climate bulbs....
Title: Re: V6 Cambelt party - Brackley
Post by: Kevin Wood on 20 February 2007, 09:36:14
Quote
Note, I will bring all the odds and sods I have lying about (with the exception of cylinder heads etc!) which members can help themselves to if they need anything....

Excellent.

Come to think of it, I'm missing the little plastic clips that hold the panel above the driver's feet on. If anyone's got a couple of these spare it would be good.

Cheers,

Kevin
Title: Re: V6 Cambelt party - Brackley
Post by: Admin on 20 February 2007, 09:41:37
Quote
I have:-

V6 Omega
V6 cambelt and tensioner kit
V6 cam locking kit

No confidence to do it myself!!

If theres any space i'd like to pop up, and if anyone can help me out with a water pump it would be most appreciated  :)

I can get the water pump. Just let me know.

Oh and Jaime. That price of £22.50 + vat for the box of oil is correct. I bought a box yesterday. :)

Title: Re: V6 Cambelt party - Brackley
Post by: Elite Pete on 20 February 2007, 09:48:07
I have just PMd MickDundee and if its OK with him and Jaime and theres time I wouldn't mind a cambelt, water pump and Aux belt oh and a gearbox upgrade :y. I could also help out in disassembling and reassembling after the belts have been done.
Title: Re: V6 Cambelt party - Brackley
Post by: BazMV6 on 20 February 2007, 09:50:54
Quote
Sure you and my dad can catch up.... I remember you from my placement i did when i was at school!

Did you get your discs done in the end? Sure could fit those in too!   :y

Will definitely try to attend both parties - if I'm allowed at yours with a V6...  ;)
Have held off on the discs, because I now know the wishbones need doing (booked for tomorrow). Hopefully that will sort it - though a quick gander at the discs at the weekend probably wouldn't go amiss.
Title: Re: V6 Cambelt party - Brackley
Post by: BazMV6 on 20 February 2007, 09:53:02
Quote

BazMV6 (unknown) - a check over - Parts, N/A

Those above please confirm if you're coming, and confirm the list above is correct please.

Put me down as a probable - though I expect it'll only be for an hour or two.  I need to pop over to Tunnie's too, to say Hello to his Dad...
Title: Re: V6 Cambelt party - Brackley
Post by: tunnie on 20 February 2007, 09:59:46
Quote
Quote
Sure you and my dad can catch up.... I remember you from my placement i did when i was at school!

Did you get your discs done in the end? Sure could fit those in too!   :y

Will definitely try to attend both parties - if I'm allowed at yours with a V6...  ;)
Have held off on the discs, because I now know the wishbones need doing (booked for tomorrow). Hopefully that will sort it - though a quick gander at the discs at the weekend probably wouldn't go amiss.

Both of them are likely to merge anyway, V6 always welcome at mine  ;)

I have a little more room at mine than TheBoy's plus if it rains, can work nice and dry double garage  :D
Title: Re: V6 Cambelt party - Brackley
Post by: Bo Bo on 20 February 2007, 10:06:53
& if some kind person is going to Vx & could get any gaskets (& O rings?) & sealant for me it would be most appreciated  :y.
I have plenty of carb cleaner & a set of plugs to chuck in....
Title: Re: V6 Cambelt party - Brackley
Post by: Craig_R on 20 February 2007, 10:25:23
I have 10 O rings From Vx going for free ill bring them along and i have a Rocker Cover Gasget Going For Free For a 4 Pot I never Fitted as i had a new one fitted when my Head Gasket was replaced i dont think its a Vx one though but its free.

Craig
Title: Re: V6 Cambelt party - Brackley
Post by: x25xe on 20 February 2007, 11:11:20
Only just seen this thread.................

If not too full, I would like to pop along for a while to put faces to names if nothing else!  I would'nt mind a tech II read particularly in the area of fault codes on the crank sensor and possibly a gear box software upgrade.  What would that lot cost?

Could bring with me my tools, axle stands, jack etc if needed.

Would be grateful if someone could let me know if space is available.
Title: Re: V6 Cambelt party - Brackley
Post by: tunnie on 20 February 2007, 11:16:41
Quote
Only just seen this thread.................

If not too full, I would like to pop along for a while to put faces to names if nothing else!  I would'nt mind a tech II read particularly in the area of fault codes on the crank sensor and possibly a gear box software upgrade.  What would that lot cost?

Could bring with me my tools, axle stands, jack etc if needed.

Would be grateful if someone could let me know if space is available.

Space Available down the road...  ;)

Still got plenty of room at mine
Title: Re: V6 Cambelt party - Brackley
Post by: theolodian on 20 February 2007, 11:17:39
With all the experts and tools that are going to be there I wish I was doing my EM gasket  :-/
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 20 February 2007, 11:25:23
So, currently we have the following experts lending a hand:
Marks_DTM_Calib
Laidback66
Me (expert in the loose sense ;))

And the following coming:
MaxV6 (confirmed) - Cambelt, waterpump, handbrake, HID fix - Parts, I will get
Theolodian (Confirmed) - HID fix, G/box update - Parts, N/A
Manbafia (Confirmed) - Cambelt, waterpump - Parts, member will get
BazMV6 (unknown) - a check over - Parts, N/A
Kevin Wood (Confirmed) - Cruise enable - Parts, member will get stalk.
SteveD (Possible) - Autobox s/w update - Parts, N/A
Sounds2k (Possible) - Autobox s/w - Parts, N/A
Phil (Possible) - Cambelt, waterpump - Parts, memeber will get
Bo Bo (Possible) - Cam cover gaskets, climate bulbs - Parts, member will get
Elite Pete (Possible) - Cambelt, waterpump - Parts, member will get
x25xe (Possible) - Tech2 check, autobox s/w - Parts, N/A
Hotel21 (Possible) - just say hello

Those above please confirm if you're coming, and confirm the list above is correct please.
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 20 February 2007, 11:26:20

************************************************************************

I think we now need to say the V6 one is full, due to time and space restrictions

************************************************************************
Title: Re: V6 Cambelt party - Brackley
Post by: Bo Bo on 20 February 2007, 11:26:21
Quote
Quote
Only just seen this thread.................

If not too full, I would like to pop along for a while to put faces to names if nothing else!  I would'nt mind a tech II read particularly in the area of fault codes on the crank sensor and possibly a gear box software upgrade.  What would that lot cost?

Could bring with me my tools, axle stands, jack etc if needed.

Would be grateful if someone could let me know if space is available.

Space Available down the road...  ;)

Still got plenty of room at mine
The way this is growing I think you'll be getting a few takers  :o
Title: Re: V6 Cambelt party - Brackley
Post by: tunnie on 20 February 2007, 11:29:21
Quote
************************************************************************

I think we now need to say the V6 one is full, due to time and space restrictions

************************************************************************

Still plenty of room down the road... i.d say for 2/3 more people...V6 ones welcome. Gadget hands here on breathers, discs anything else. JamesV6CDX also knows a thing or 2 about V6 cambelts as well...
Title: Re: V6 Cambelt party - Brackley
Post by: Bo Bo on 20 February 2007, 11:29:54
Quote
So, currently we have the following experts lending a hand:
Marks_DTM_Calib
Laidback66
Me (expert in the loose sense ;))

And the following coming:
MaxV6 (confirmed) - Cambelt, waterpump, handbrake, HID fix - Parts, I will get
Theolodian (Confirmed) - HID fix, G/box update - Parts, N/A
Manbafia (Confirmed) - Cambelt, waterpump - Parts, member will get
BazMV6 (unknown) - a check over - Parts, N/A
Kevin Wood (Confirmed) - Cruise enable - Parts, member will get stalk.
SteveD (Possible) - Autobox s/w update - Parts, N/A
Sounds2k (Possible) - Autobox s/w - Parts, N/A
Phil (Possible) - Cambelt, waterpump - Parts, memeber will get
Bo Bo (Possible) - Cam cover gaskets, climate bulbs - Parts, member will get
Elite Pete (Possible) - Cambelt, waterpump - Parts, member will get

Hotel21 (Possible) - just say hello

Those above please confirm if you're coming, and confirm the list above is correct please.
Make me a definate please :y
If someone can get the get the gaskets etc on TC that would be great  :) if not I'll pick some up.....
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 20 February 2007, 11:31:37
Those who are thinking of coming just to say hello, any chance you can get lift with someone who is bringing a car - carpark is a little tight in our small cul-de-sac.  Alternatively, see if Tunnie has room, and wander over (about 1/3 - 1/2 mile)
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 20 February 2007, 11:33:47
So, currently we have the following experts lending a hand:
Marks_DTM_Calib
Laidback66
Me (expert in the loose sense ;))

And the following coming:
MaxV6 (confirmed) - Cambelt, waterpump, handbrake, HID fix - Parts, I will get
Theolodian (Confirmed) - HID fix, G/box update - Parts, N/A
Manbafia (Confirmed) - Cambelt, waterpump - Parts, member will get
BazMV6 (unknown) - a check over - Parts, N/A
Kevin Wood (Confirmed) - Cruise enable - Parts, member will get stalk.
SteveD (Possible) - Autobox s/w update - Parts, N/A
Sounds2k (Possible) - Autobox s/w - Parts, N/A
Phil (Possible) - Cambelt, waterpump - Parts, memeber will get
Bo Bo (Confirmed) - Cam cover gaskets, climate bulbs - Parts, member will get
Elite Pete (Possible) - Cambelt, waterpump - Parts, member will get
x25xe (Possible) - Tech2 check, autobox s/w - Parts, N/A
Hotel21 (Possible) - just say hello

Those above please confirm if you're coming, and confirm the list above is correct please.


******************

This event is now full

******************
Title: Re: V6 Cambelt party - Brackley
Post by: Timbuk on 20 February 2007, 11:33:50
Quote
Those who are thinking of coming just to say hello, any chance you can get lift with someone who is bringing a car - carpark is a little tight in our small cul-de-sac.  Alternatively, see if Tunnie has room, and wander over (about 1/3 - 1/2 mile)

Im coming with EP ;)
Title: Re: V6 Cambelt party - Brackley
Post by: tunnie on 20 February 2007, 11:34:53
Quote
Those who are thinking of coming just to say hello, any chance you can get lift with someone who is bringing a car - carpark is a little tight in our small cul-de-sac.  Alternatively, see if Tunnie has room, and wander over (about 1/3 - 1/2 mile)

Practically unlimited parking here, we can line the road with them  ;D ;D

Seriously though loads of space, my belt is getting done early then doing TD's and CraigR's.... got a double garage here so 2 cam belts can be done at once in there, space on the drive for 3 others too...
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 20 February 2007, 11:35:49
So, currently we have the following experts lending a hand:
Marks_DTM_Calib
Laidback66
Me (expert in the loose sense ;))

And the following coming:
MaxV6 (confirmed) - Cambelt, waterpump, handbrake, HID fix - Parts, I will get
Theolodian (Confirmed) - HID fix, G/box update - Parts, N/A
Manbafia (Confirmed) - Cambelt, waterpump - Parts, member will get
BazMV6 (unknown) - a check over - Parts, N/A
Kevin Wood (Confirmed) - Cruise enable - Parts, member will get stalk.
SteveD (Possible) - Autobox s/w update - Parts, N/A
Sounds2k (Possible) - Autobox s/w - Parts, N/A
Phil (Possible) - Cambelt, waterpump - Parts, memeber will get
Bo Bo (Confirmed) - Cam cover gaskets, climate bulbs - Parts, member will get
Elite Pete (Possible) - Cambelt, waterpump - Parts, member will get
x25xe (Possible) - Tech2 check, autobox s/w - Parts, N/A

And following just to say hello...
Hotel21 (Possible)
Timbuk (Confirmed)

Those above please confirm if you're coming, and confirm the list above is correct please.


******************

This event is now full

******************
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 20 February 2007, 11:47:33
Weather...

http://www.metcheck.com/V40/UK/FREE/dayforecast.asp?zipcode=Brackley&day=4

(usually find Metcheck to be more accurate than other online ones)
Title: Re: V6 Cambelt party - Brackley
Post by: tunnie on 20 February 2007, 11:48:39
Quote
Weather...

http://www.metcheck.com/V40/UK/FREE/dayforecast.asp?zipcode=Brackley&day=4

(usually find Metcheck to be more accurate than other online ones)

Weather looking good!  :D
Title: Re: V6 Cambelt party - Brackley
Post by: Elite Pete on 20 February 2007, 11:49:24
Im a definate, if anyone wants picking up I will be leaving Northwich and heading to Telford so ive space for 3 more :y.

Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 20 February 2007, 11:52:18
There may be limited opportunity to stay at mine (numbers very strictly limited, obviously) if you fancy having a beer or 2....  ....need your own airbed and sleeping bag etc...

Garden isn't really good enough for tents.

Hotel in town (Crown Hotel in Brackley), premier Inn at Brackley Hatch (5m).  May be b&b in area, never checked.
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 20 February 2007, 11:53:25
So, currently we have the following experts lending a hand:
Marks_DTM_Calib
Laidback66
Me (expert in the loose sense ;))

And the following coming:
MaxV6 (Confirmed) - Cambelt, waterpump, handbrake, HID fix - Parts, I will get
Theolodian (Confirmed) - HID fix, G/box update - Parts, N/A
Manbafia (Confirmed) - Cambelt, waterpump - Parts, member will get
BazMV6 (Confirmed) - a check over - Parts, N/A
Kevin Wood (Confirmed) - Cruise enable - Parts, member will get stalk.
SteveD (Possible) - Autobox s/w update - Parts, N/A
Sounds2k (Possible) - Autobox s/w - Parts, N/A
Phil (Possible) - Cambelt, waterpump - Parts, memeber will get
Bo Bo (Confirmed) - Cam cover gaskets, climate bulbs - Parts, member will get
Elite Pete (Confirmed) - Cambelt, waterpump - Parts, member will get
x25xe (Possible) - Tech2 check, autobox s/w - Parts, N/A

And following just to say hello...
Hotel21 (Possible)
Timbuk (Confirmed)

Those above please confirm if you're coming, and confirm the list above is correct please.


******************

This event is now full

******************
Title: Re: V6 Cambelt party - Brackley
Post by: Marks DTM Calib on 20 February 2007, 11:57:14
So....the big jobs:

4 off V6 cambelts
1 off V6 Camcovers
1 off handbrake strip/adjust

I will try to get down for 9.30ish as thats a lot to get done....we need the first victim there by then idealy....
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 20 February 2007, 12:01:02
Quote
So....the big jobs:

4 off V6 cambelts
1 off V6 Camcovers
1 off handbrake strip/adjust

I will try to get down for 9.30ish as thats a lot to get done....we need the first victim there by then idealy....
It would be ideal if MaxV6 gets there first, as his car will spend most of day on driveway....

Can you get there before 9:30 MaxV6, or even earlier so we can start removing bagpipes before M_DTM arrives...
Title: Re: V6 Cambelt party - Brackley
Post by: Elite Pete on 20 February 2007, 12:01:40
Is it possible someone with a TC can get my parts and any gaskets I might need and just to be really cheeky can I have 4x5 litres of oil :D. I can send the money via PayPal or give the cash on the day.

Title: Re: V6 Cambelt party - Brackley
Post by: Marks DTM Calib on 20 February 2007, 12:24:13
Note to those requiring cambelt kits.....TheBoy will need engine numbers so we can get the right one!
Title: Re: V6 Cambelt party - Brackley
Post by: Bo Bo on 20 February 2007, 12:35:45
I can be there any time you like really as I'm not that far away....
Title: Re: V6 Cambelt party - Brackley
Post by: x25xe on 20 February 2007, 12:42:52
Quote
So, currently we have the following experts lending a hand:
Marks_DTM_Calib
Laidback66
Me (expert in the loose sense ;))

And the following coming:
MaxV6 (confirmed) - Cambelt, waterpump, handbrake, HID fix - Parts, I will get
Theolodian (Confirmed) - HID fix, G/box update - Parts, N/A
Manbafia (Confirmed) - Cambelt, waterpump - Parts, member will get
BazMV6 (unknown) - a check over - Parts, N/A
Kevin Wood (Confirmed) - Cruise enable - Parts, member will get stalk.
SteveD (Possible) - Autobox s/w update - Parts, N/A
Sounds2k (Possible) - Autobox s/w - Parts, N/A
Phil (Possible) - Cambelt, waterpump - Parts, memeber will get
Bo Bo (Confirmed) - Cam cover gaskets, climate bulbs - Parts, member will get
Elite Pete (Possible) - Cambelt, waterpump - Parts, member will get
x25xe (Possible) - Tech2 check, autobox s/w - Parts, N/A
Hotel21 (Possible) - just say hello

Those above please confirm if you're coming, and confirm the list above is correct please.


******************

This event is now full

******************


Great!  Please put me down as a definate.  Looking forward to it!

As I get up Tunnie time ;D I will get there early afternoon if that is OK.  If not, let me know.  Where abouts are you?  Could you PM directions / address?

Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 20 February 2007, 14:12:27
So, currently we have the following experts lending a hand:
Marks_DTM_Calib
Laidback66
Me (expert in the loose sense ;))

And the following coming:
MaxV6 (Confirmed) - Cambelt, waterpump, handbrake, HID fix - Parts, I will get
Theolodian (Confirmed) - HID fix, G/box update - Parts, N/A
Manbafia (Confirmed) - Cambelt, waterpump - Parts, member will get
BazMV6 (Confirmed) - a check over - Parts, N/A
Kevin Wood (Confirmed) - Cruise enable - Parts, member will get stalk.
SteveD (Possible) - Autobox s/w update - Parts, N/A
Sounds2k (Possible) - Autobox s/w - Parts, N/A
Phil (Possible) - Cambelt, waterpump - Parts, memeber will get
Bo Bo (Confirmed) - Cam cover gaskets, climate bulbs - Parts, member will get
Elite Pete (Confirmed) - Cambelt, waterpump - Parts, member will get
x25xe (Confirmed) - Tech2 check, autobox s/w - Parts, N/A

And following just to say hello...
Hotel21 (Possible)
Timbuk (Confirmed)

Those above please confirm if you're coming, and confirm the list above is correct please.


******************

This event is now full

******************
Title: Re: V6 Cambelt party - Brackley
Post by: Phil on 20 February 2007, 14:23:24
I'm a definate, i can be there as early as you like, and if you could get the water pump for me, ill bring some cash, unless you want paypal or cheque.

Some directions would help as i haven't a clue where you are  :y
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 20 February 2007, 14:24:58
So, currently we have the following experts lending a hand:
Marks_DTM_Calib
Laidback66
Me (expert in the loose sense ;))

And the following coming:
MaxV6 (Confirmed) - Cambelt, waterpump, handbrake, HID fix - Parts, I will get
Theolodian (Confirmed) - HID fix, G/box update - Parts, N/A
Manbafia (Confirmed) - Cambelt, waterpump - Parts, member will get
BazMV6 (Confirmed) - a check over - Parts, N/A
Kevin Wood (Confirmed) - Cruise enable - Parts, member will get stalk.
SteveD (Possible) - Autobox s/w update - Parts, N/A
Sounds2k (Possible) - Autobox s/w - Parts, N/A
Phil (Confirmed) - Cambelt, waterpump - Parts, memeber will get
Bo Bo (Confirmed) - Cam cover gaskets, climate bulbs - Parts, member will get
Elite Pete (Confirmed) - Cambelt, waterpump - Parts, member will get
x25xe (Confirmed) - Tech2 check, autobox s/w - Parts, N/A

And following just to say hello...
Hotel21 (Possible)
Timbuk (Confirmed)

Those above please confirm if you're coming, and confirm the list above is correct please.


******************

This event is now full

******************
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 20 February 2007, 14:31:15
Address will be PM'd to attendees nearer the time - if you are down as 'Confirmed' on the list (which is reposted everytime its updated), you will get a PM....

Presumably Tunnie will do similar for his arrangements...
Title: Re: V6 Cambelt party - Brackley
Post by: tunnie on 20 February 2007, 14:36:56
Quote
Address will be PM'd to attendees nearer the time - if you are down as 'Confirmed' on the list (which is reposted everytime its updated), you will get a PM....

Presumably Tunnie will do similar for his arrangements...

Will do, already given mine out to several.

I'll send it again nearer the time with my mobile number, feel free to send mine in your PM too in case your busy  :y
Title: Re: V6 Cambelt party - Brackley
Post by: AndersH on 20 February 2007, 15:25:38
Does anyone know how much are cruise stalks new? If I could get one before saturday then I may have most of the parts by then!
Title: Re: V6 Cambelt party - Brackley
Post by: Kevin Wood on 20 February 2007, 15:30:50
Have a look at ebay item 150092463827. Not sure it'd arrive by Saturday but looks pretty reasonable.

Not sure how much they are through other channels.


Kevin
Title: Re: V6 Cambelt party - Brackley
Post by: Marks DTM Calib on 20 February 2007, 15:33:59
Works out about 5 quid more trade from the dealer....

LMF will deliver before Saturday....
Title: Re: V6 Cambelt party - Brackley
Post by: AndersH on 20 February 2007, 16:01:36
Quote
Have a look at ebay item 150092463827. Not sure it'd arrive by Saturday but looks pretty reasonable.

Not sure how much they are through other channels.


Kevin

That one's ended now unfortunately, I can't find them on LMF's site - I'll have to give them a ring. Any idea of part number anyone?
Title: Re: V6 Cambelt party - Brackley
Post by: tunnie on 20 February 2007, 16:08:23
Quote
Does anyone know how much are cruise stalks new? If I could get one before saturday then I may have most of the parts by then!

Cruise stalk from Vaux is £34 + vat retail

£31 + vat TC, so not much saving....
Title: Re: V6 Cambelt party - Brackley
Post by: Marks DTM Calib on 20 February 2007, 16:08:33
9181011.....Omega indicator stalk with cruise function - Petrol engines+Vx diesels
Title: Re: V6 Cambelt party - Brackley
Post by: MaxV6 on 20 February 2007, 17:28:18
I Will get there as early as is practicable and reasonable , definitely before 9.30.....  how much before depends on what time I get to bed friday night...  Working late sadly.... not drinking .


If it's necessary, although I'm not really local, there's space for a tent or maybe two, on our garden......   I am however, some distance from Brackley....  

I'll bring my idiot 15 year old Son with me to assist in making of tea, butties , burgers ,  and the like .
Sadly, while he's usually really very good and helpful crawling into small spaces and getting hands into even smaller ones, with utterly typical teenage stupidity,  he's broken  and badly torn the ligaments of the middle finger on his left hand, and is of course, left flippin handed... so generally willing  but not entirely able....   but he does have a wicked sense of humour and does a pretty good line in improv comedy..... ;)

I'll drop down to the Market in Oxford tomorrow and see about some bulk deals on dead animals for a contribution the BBQ.


Max
Title: Re: V6 Cambelt party - Brackley
Post by: Marks DTM Calib on 20 February 2007, 17:31:36
Maybe we should do a Top Gear style road kill barbeque....I will drive down the A444 and see if there are any elephants at the side of the road near Twycross zoo....
Title: Re: V6 Cambelt party - Brackley
Post by: tunnie on 20 February 2007, 17:46:17
Quote
Maybe we should do a Top Gear style road kill barbeque....I will drive down the A444 and see if there are any elephants at the side of the road near Twycross zoo....

We can also drive at high speed into the fields behind Brackley, they tend to be full of cattle. Sure to hit one!  :D
Title: Re: V6 Cambelt party - Brackley
Post by: Elite Pete on 20 February 2007, 17:46:38
Thats all very well Mark, but the elephant will feed me, what are the rest of you going to eat ;D
Title: Re: V6 Cambelt party - Brackley
Post by: Marks DTM Calib on 20 February 2007, 17:49:44
I might go for the squirrel on your avatar....it looks to be getting plenty of exercise!
Title: Re: V6 Cambelt party - Brackley
Post by: tunnie on 20 February 2007, 17:51:22
we could go rabbit hunting if anyone packs a shottie  ::)
Title: Re: V6 Cambelt party - Brackley
Post by: MaxV6 on 20 February 2007, 17:59:00
While in principle I think it's a great idea Mark, I have to tell you I've actually seen what happens when an elephant argues with a car, first hand.

let me put it like this, even YOUR undoubtedly  immaculately cared for meega would not be on the winning team.

even just trying to move the carcass requires a decent crane and sizeable HGV.

(TV OB/ENG teams see all sorts of weird shit....)

And , what with My meega having made it's own dent in oxfordshire's wildlife reserves last year....   I think maybe I'd rather go to market, or become a veggie.,

Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 20 February 2007, 18:56:49
Right, parts wise, I have got a cambelt kit and aux belt for MaxV6.  Waterpumps appear to be in short supply around here.

Has everyone else managed to arrange their parts?
Title: Re: V6 Cambelt party - Brackley
Post by: sounds2k on 20 February 2007, 19:01:41
... well, the weather here looks like it's gonna be on the wet side for most of this week - I got hold of all the cam cover gaskets & stuff from Vx today, so I might end up bringing it all with me!!

So count me as confirmed, whichever location is considered best ...

Reckon I can do it OK if there's space and it's fairly dry, will leave here about 7-ish  :o - so hope to get there for 9-ish !!

I have an air bed etc - anyone got room??? ta  :y

isn't Santa Pod very close to there? They have a run what ya brung day on Sun 25th  ;)
Title: Re: V6 Cambelt party - Brackley
Post by: Bo Bo on 20 February 2007, 19:04:21
Quote
Right, parts wise, I have got a cambelt kit and aux belt for MaxV6.  Waterpumps appear to be in short supply around here.

Has everyone else managed to arrange their parts?
Err nope, wasn't even thinking about this til today, will phone Vx tomorrow.......
Title: Re: V6 Cambelt party - Brackley
Post by: sounds2k on 20 February 2007, 19:09:00
... let me know if any other bits are required ASAP, I can try the local dealer round here  :)
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 20 February 2007, 19:39:55
OK, seems one or 2 members are willing to get bits for others, hopefully at TC prices :)
Title: Re: V6 Cambelt party - Brackley
Post by: MikeDundee on 20 February 2007, 19:41:40
Quote
Address will be PM'd to attendees nearer the time - if you are down as 'Confirmed' on the list (which is reposted everytime its updated), you will get a PM....

Presumably Tunnie will do similar for his arrangements...

Well looks like you have another gatecrasher, but I am coming to get my dials done hopefully by Pete, will be leaving London earlyish :y
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 20 February 2007, 19:47:13
So, currently we have the following experts lending a hand:
Marks_DTM_Calib
Laidback66
Me (expert in the loose sense ;))

And the following coming:
MaxV6 (Confirmed) - Cambelt, waterpump, handbrake, HID fix - Parts, I will get
Theolodian (Confirmed) - HID fix, G/box update - Parts, N/A
Manbafia (Confirmed) - Cambelt, waterpump - Parts, member will get
BazMV6 (Confirmed) - a check over - Parts, N/A
Kevin Wood (Confirmed) - Cruise enable - Parts, member will get stalk.
SteveD (Possible) - Autobox s/w update - Parts, N/A
Sounds2k (Possible) - Autobox s/w - Parts, N/A
Phil (Confirmed) - Cambelt, waterpump - Parts, memeber will get
Bo Bo (Confirmed) - Cam cover gaskets, climate bulbs - Parts, member will get
Elite Pete (Confirmed) - Cambelt, waterpump - Parts, member will get
x25xe (Confirmed) - Tech2 check, autobox s/w - Parts, N/A

And following just to say hello...
Hotel21 (Possible)
Timbuk (Confirmed)
MickDundee (Confirmed)
Those above please confirm if you're coming, and confirm the list above is correct please.


******************

This event is now full

******************
Title: Re: V6 Cambelt party - Brackley
Post by: hotel21 on 20 February 2007, 19:48:48
Looks like I am going to have to say not this time chaps and chapettes.  My elderly mother in law took a wee turn today and it would be marital suicide to go away for a road trip at such a time.   Hope the weather is fair and that evryone gets done what they want done.

Looking forward to a meet at Drax though!

B

ps - What price for a new ICV or anyone got one thats going spare?  Both mine are rubber ducked (I have a spare) but there are none to be had in the scrappies near me.  May well have to buy a shiney one otherwise.....    :'(

Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 20 February 2007, 19:50:36
So, currently we have the following experts lending a hand:
Marks_DTM_Calib
Laidback66
Me (expert in the loose sense ;))

And the following coming:
MaxV6 (Confirmed) - Cambelt, waterpump, handbrake, HID fix - Parts, I will get
Theolodian (Confirmed) - HID fix, G/box update - Parts, N/A
Manbafia (Confirmed) - Cambelt, waterpump - Parts, member will get
BazMV6 (Confirmed) - a check over - Parts, N/A
Kevin Wood (Confirmed) - Cruise enable - Parts, member will get stalk.
SteveD (Possible) - Autobox s/w update - Parts, N/A
Sounds2k (Possible) - Autobox s/w - Parts, N/A
Phil (Confirmed) - Cambelt, waterpump - Parts, memeber will get
Bo Bo (Confirmed) - Cam cover gaskets, climate bulbs - Parts, member will get
Elite Pete (Confirmed) - Cambelt, waterpump - Parts, member will get
x25xe (Confirmed) - Tech2 check, autobox s/w - Parts, N/A

And following just to say hello...
Timbuk (Confirmed)
MickDundee (Confirmed)
Those above please confirm if you're coming, and confirm the list above is correct please.


******************

This event is now full

******************
Title: Re: V6 Cambelt party - Brackley
Post by: tunnie on 20 February 2007, 19:59:48
Quote
Right, parts wise, I have got a cambelt kit and aux belt for MaxV6.  Waterpumps appear to be in short supply around here.

Has everyone else managed to arrange their parts?

Try Autovaux if anyone needs parts, i ordered my cambelt, aux belt and waterpump on Monday cost me £120 in total including delivery for GM parts.

Ordered Monday arrived today first thing  :y
Title: Re: V6 Cambelt party - Brackley
Post by: sounds2k on 20 February 2007, 21:11:01
I'll be there. Will probably bring the cam cover gasket stuff and do that whilst up there.

Can't get booked into the crown though - full already  :'(

Will bring my V6 locking kit, 30mm ring spanner, torque wrenches, breaker bars and a few other bits ... happy to help out with changing climate control bulbs etc. if needed ...
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 20 February 2007, 21:15:51
So, currently we have the following experts lending a hand:
Marks_DTM_Calib
Laidback66
Me (expert in the loose sense ;))

And the following coming:
MaxV6 (Confirmed) - Cambelt, waterpump, handbrake, HID fix - Parts, I will get
Theolodian (Confirmed) - HID fix, G/box update - Parts, N/A
Manbafia (Confirmed) - Cambelt, waterpump - Parts, member will get
BazMV6 (Confirmed) - a check over - Parts, N/A
Kevin Wood (Confirmed) - Cruise enable - Parts, member will get stalk.
SteveD (Possible) - Autobox s/w update - Parts, N/A
Sounds2k (Confirmed) - Autobox s/w - Parts, N/A
Phil (Confirmed) - Cambelt, waterpump - Parts, memeber will get
Bo Bo (Confirmed) - Cam cover gaskets, climate bulbs - Parts, member will get
Elite Pete (Confirmed) - Cambelt, waterpump - Parts, member will get
x25xe (Confirmed) - Tech2 check, autobox s/w - Parts, N/A

And following just to say hello...
Timbuk (Confirmed)
MickDundee (Confirmed)
Those above please confirm if you're coming, and confirm the list above is correct please.


******************

This event is now full

******************
Title: Re: V6 Cambelt party - Brackley
Post by: Markjay on 20 February 2007, 21:17:05
Who's in charge of taking pictures then?



Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 20 February 2007, 21:29:27
Quote
Who's in charge of taking pictures then?



Looking at that workstack, we won't have time for pictures  8-)
Title: Re: V6 Cambelt party - Brackley
Post by: Timbuk on 20 February 2007, 21:43:38
Quote
Quote
Who's in charge of taking pictures then?



Looking at that workstack, we won't have time for pictures  8-)

Me ;) And i'll get my hands dirty, pretty good at stripping ready for belts
Title: Re: V6 Cambelt party - Brackley
Post by: MaxV6 on 20 February 2007, 21:44:52
Well I can point Mike, my Son in the direction of  a photo opportunity from time to time....   Likewise I'll try and remember to look up from whatever i happen to be cleaning or cooking now and again to do the same....

What about a Webcam???  


( i don't have one to hand, it just wandered through my mind is all....    )

Max
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 20 February 2007, 21:45:08
Quote
Quote
Quote
Who's in charge of taking pictures then?



Looking at that workstack, we won't have time for pictures  8-)

Me ;)
I knew you were coming for a reason ;) :y

After all, we ain't letting you loose on someone's car - you may shear a bolt on the waterpump ::)
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 20 February 2007, 21:46:38
Quote
What about a Webcam???  
I have plenty of cheap webcams.

What I don't have is sufficient bandwidth to run this forum and do live updates ;)
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 20 February 2007, 21:47:38
Quote
Quote
What about a Webcam???  
I have plenty of cheap webcams.

What I don't have is sufficient bandwidth to run this forum and do live updates ;)
Actually.... ....I wonder.... ....Hmmm....
Title: Re: V6 Cambelt party - Brackley
Post by: theolodian on 20 February 2007, 21:47:42
Quote
Quote
Quote
Quote
Who's in charge of taking pictures then?



Looking at that workstack, we won't have time for pictures  8-)

Me ;)
I knew you were coming for a reason ;) :y

After all, we ain't letting you loose on someone's car - you may shear a bolt on the waterpump ::)
;D ;D ;D
Title: Re: V6 Cambelt party - Brackley
Post by: Timbuk on 20 February 2007, 21:48:26
Quote
Quote
Quote
Quote
Who's in charge of taking pictures then?



Looking at that workstack, we won't have time for pictures  8-)

Me ;)
I knew you were coming for a reason ;) :y

After all, we ain't letting you loose on someone's car - you may shear a bolt on the waterpump ::)

 :-[It was my car though
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 20 February 2007, 21:50:33
Quote
Quote
Quote
Quote
Quote
Who's in charge of taking pictures then?



Looking at that workstack, we won't have time for pictures  8-)

Me ;)
I knew you were coming for a reason ;) :y

After all, we ain't letting you loose on someone's car - you may shear a bolt on the waterpump ::)

 :-[It was my car though
Only because we didn't let you touch any others....  ;)
Title: Re: V6 Cambelt party - Brackley
Post by: Timbuk on 20 February 2007, 21:52:32
Quote
Quote
Quote
Quote
Quote
Quote
Who's in charge of taking pictures then?



Looking at that workstack, we won't have time for pictures  8-)

Me ;)
I knew you were coming for a reason ;) :y

After all, we ain't letting you loose on someone's car - you may shear a bolt on the waterpump ::)

 :-[It was my car though
Only because we didn't let you touch any others....  ;)

I need back up here Bo Bo , where are you :D watching Life on Mars I suppose ::)
Title: Re: V6 Cambelt party - Brackley
Post by: hotel21 on 20 February 2007, 21:53:10
Quote
Quote
Quote
Who's in charge of taking pictures then?



Looking at that workstack, we won't have time for pictures  8-)

Me ;) And i'll get my hands dirty, pretty good at stripping ready for belts

 ;D

Cue the start of the Full Monty intro music...   ;D
Title: Re: V6 Cambelt party - Brackley
Post by: tunnie on 20 February 2007, 21:54:12
Quote
Quote
Quote
What about a Webcam???  
I have plenty of cheap webcams.

What I don't have is sufficient bandwidth to run this forum and do live updates ;)
Actually.... ....I wonder.... ....Hmmm....

Not a dedicated line, but we run 2mbit at ours which does not get much use....

I am sure we can stream it from ours, any ideas on the software to use?
Title: Re: V6 Cambelt party - Brackley
Post by: tunnie on 20 February 2007, 21:54:58
Quote
Quote
Quote
Quote
Who's in charge of taking pictures then?



Looking at that workstack, we won't have time for pictures  8-)

Me ;)
I knew you were coming for a reason ;) :y

After all, we ain't letting you loose on someone's car - you may shear a bolt on the waterpump ::)

Thats my job shearing bolts!
Title: Re: V6 Cambelt party - Brackley
Post by: theolodian on 20 February 2007, 21:57:34
Quote
Quote
Quote
Quote
Quote
Who's in charge of taking pictures then?



Looking at that workstack, we won't have time for pictures  8-)

Me ;)
I knew you were coming for a reason ;) :y

After all, we ain't letting you loose on someone's car - you may shear a bolt on the waterpump ::)

Thats my job shearing bolts!
Classic lesson in leverage, wimp with 2m arms can break anything  :P ;D
Title: Re: V6 Cambelt party - Brackley
Post by: Timbuk on 20 February 2007, 21:57:42
Quote
Quote
Quote
Quote
Who's in charge of taking pictures then?



Looking at that workstack, we won't have time for pictures  8-)

Me ;) And i'll get my hands dirty, pretty good at stripping ready for belts

 ;D

Cue the start of the Full Monty intro music...   ;D

Yes perhaps i should have phrased that better :o
Title: Re: V6 Cambelt party - Brackley
Post by: tunnie on 20 February 2007, 22:06:51
V6 Timing Kits......

Does anyone have any spare that we can borrow? We are going to need one at the 2.2 location....
Title: Re: V6 Cambelt party - Brackley
Post by: Marks DTM Calib on 20 February 2007, 22:09:09
What the hell for....nothing from it fits a 2[size=14]/[/size]3 engine.....
Title: Re: V6 Cambelt party - Brackley
Post by: Admin on 20 February 2007, 22:10:00
I trust you mean locking kits as I really would not want a "borrowed kit" :)
Title: Re: V6 Cambelt party - Brackley
Post by: sounds2k on 20 February 2007, 22:10:32
Quote
What the hell for....nothing from it fits a 2/3 engine.....
the plastic box??  ;D
Title: Re: V6 Cambelt party - Brackley
Post by: Bo Bo on 20 February 2007, 22:13:38
Quote
Quote
Quote
Quote
Quote
Quote
Quote
Who's in charge of taking pictures then?



Looking at that workstack, we won't have time for pictures  8-)

Me ;)
I knew you were coming for a reason ;) :y

After all, we ain't letting you loose on someone's car - you may shear a bolt on the waterpump ::)

 :-[It was my car though
Only because we didn't let you touch any others....  ;)

I need back up here Bo Bo , where are you :D watching Life on Mars I suppose ::)
Yep.....
Title: Re: V6 Cambelt party - Brackley
Post by: tunnie on 20 February 2007, 22:16:41
Quote
What the hell for....nothing from it fits a 2[size=14]/[/size]3 engine.....

We have a V6 at the 2.2 party since the V6 location is full!!!

Nothing wrong with the 4pots, I get 10mpg better at 80+ in the 2.2 compared to the Senator!
Title: Re: V6 Cambelt party - Brackley
Post by: Bo Bo on 20 February 2007, 22:20:06
Quote
Quote
Quote
Quote
Quote
Quote
Quote
Who's in charge of taking pictures then?



Looking at that workstack, we won't have time for pictures  8-)

Me ;)
I knew you were coming for a reason ;) :y

After all, we ain't letting you loose on someone's car - you may shear a bolt on the waterpump ::)

 :-[It was my car though
Only because we didn't let you touch any others....  ;)

I need back up here Bo Bo , where are you :D watching Life on Mars I suppose ::)
I'd never have got those bolts back in the aux belt tensioner  :y
Title: Re: V6 Cambelt party - Brackley
Post by: sounds2k on 20 February 2007, 22:20:51
Quote
We have a V6 at the 2.2 party since the V6 location is full!!!

Nothing wrong with the 4pots, I get 10mpg better at 80+ in the 2.2 compared to the Senator!
.... apparently if you take your foot off the accelerator in the sennie the MPG improves  ;)

I'll be bringing (but not using) my locking kit & 30mm spanner so they can be used at either location (or both) ...
Title: Re: V6 Cambelt party - Brackley
Post by: tunnie on 20 February 2007, 22:23:56
Quote
Quote
We have a V6 at the 2.2 party since the V6 location is full!!!

Nothing wrong with the 4pots, I get 10mpg better at 80+ in the 2.2 compared to the Senator!
.... apparently if you take your foot off the accelerator in the sennie the MPG improves  ;)

I'll be bringing (but not using) my locking kit & 30mm spanner so they can be used at either location (or both) ...

I managed to squeeze 37 mpg from the Senator on the run back to uni, but that was doing 65 mph all the way back!

I can get 36mpg doing 85mph with 3 people in the car in the 2.2 on a motorway run!

That extra kit will come in handy! Thanks!  :y
Title: Re: V6 Cambelt party - Brackley
Post by: Timbuk on 20 February 2007, 22:24:42
Quote
Quote
Quote
Quote
Quote
Quote
Quote
Quote
Who's in charge of taking pictures then?



Looking at that workstack, we won't have time for pictures  8-)

Me ;)
I knew you were coming for a reason ;) :y

After all, we ain't letting you loose on someone's car - you may shear a bolt on the waterpump ::)

 :-[It was my car though
Only because we didn't let you touch any others....  ;)

I need back up here Bo Bo , where are you :D watching Life on Mars I suppose ::)
I'd never have got those bolts back in the aux belt tensioner  :y

See Mr Jaime, i can do some things ::)
Title: Re: V6 Cambelt party - Brackley
Post by: AndersH on 20 February 2007, 23:02:02
My stuff arrived today from Autovaux, wondering if I've got the right thing though as Tunnie said his was GM and mine doesn't look like it is - I know it's a different part as we have different engines but mine seems to made by SKF - is this right?
Title: Re: V6 Cambelt party - Brackley
Post by: sounds2k on 20 February 2007, 23:06:17
I seem to remember SKF make the bearings used in the tensioners ... what does it say on the belt itself - contitech?
Title: Re: V6 Cambelt party - Brackley
Post by: tunnie on 20 February 2007, 23:06:36
Quote
My stuff arrived today from Autovaux, wondering if I've got the right thing though as Tunnie said his was GM and mine doesn't look like it is - I know it's a different part as we have different engines but mine seems to made by SKF - is this right?

Mine should be GM its back home so not checked yet, they better have sent me the right kit!

When I rang up they said it would be a genuine GM kit sent...
Title: Re: V6 Cambelt party - Brackley
Post by: AndersH on 20 February 2007, 23:12:24
Quote
I seem to remember SKF make the bearings used in the tensioners ... what does it say on the belt itself - contitech?

It says Gates PowerGrip....   :-/
Title: Re: V6 Cambelt party - Brackley
Post by: sounds2k on 20 February 2007, 23:16:30
Quote
Quote
I seem to remember SKF make the bearings used in the tensioners ... what does it say on the belt itself - contitech?

It says Gates PowerGrip....   :-/
... not a problem. Mine was a Gates "powergrip" kit bought from a local motor factors - cost me about £100  :o

but Gates are apparently one of (if not the) best ... have done 6k since it was fitted ...
Title: Re: V6 Cambelt party - Brackley
Post by: AndersH on 20 February 2007, 23:30:51
Quote
Quote
Quote
I seem to remember SKF make the bearings used in the tensioners ... what does it say on the belt itself - contitech?

It says Gates PowerGrip....   :-/
... not a problem. Mine was a Gates "powergrip" kit bought from a local motor factors - cost me about £100  :o

but Gates are apparently one of (if not the) best ... have done 6k since it was fitted ...

Ah good, that's ok then!  :D
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 21 February 2007, 08:10:33
A Gates belt and SKF bearings are absolutely fine :y
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 21 February 2007, 08:13:19
Quote
Quote
Quote
Quote
What about a Webcam???  
I have plenty of cheap webcams.

What I don't have is sufficient bandwidth to run this forum and do live updates ;)
Actually.... ....I wonder.... ....Hmmm....

Not a dedicated line, but we run 2mbit at ours which does not get much use....

I am sure we can stream it from ours, any ideas on the software to use?
I have a 'spare' DSL line here, dynamic IP though. Syncs at 6.3Mb, so some throughput on it.  May take 15m snapshots and ftp theb up to a host somewhere.....    ....leave it with me....
Title: Re: V6 Cambelt party - Brackley
Post by: Marks DTM Calib on 21 February 2007, 08:13:48
Although Gates isnt genune so autovaux have done it again......
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 21 February 2007, 08:15:00
Quote
Quote
Quote
We have a V6 at the 2.2 party since the V6 location is full!!!

Nothing wrong with the 4pots, I get 10mpg better at 80+ in the 2.2 compared to the Senator!
.... apparently if you take your foot off the accelerator in the sennie the MPG improves  ;)

I'll be bringing (but not using) my locking kit & 30mm spanner so they can be used at either location (or both) ...

I managed to squeeze 37 mpg from the Senator on the run back to uni, but that was doing 65 mph all the way back!

I can get 36mpg doing 85mph with 3 people in the car in the 2.2 on a motorway run!

That extra kit will come in handy! Thanks!  :y
It should get more economical after every speed bump, as more and more bits/rust fall off....
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 21 February 2007, 08:16:23
Quote
Although Gates isnt genune so autovaux have done it again......
They do have a habit of sending out non genuine parts, even when requested.  However, I thought Gates/SKF was a very good combo?
Title: Re: V6 Cambelt party - Brackley
Post by: Ronald_McBurger on 21 February 2007, 08:20:40
I am genuinely gutted that I cannot make it this weekend. I am booked up for lessons on Saturday :(

I will however have a break at lunch, so I will call at least to say hello to the gang.

Good luck to everyone. Should be a great day all round and I will be laughing at thinking about you all.

 :y
Title: Re: V6 Cambelt party - Brackley
Post by: Marks DTM Calib on 21 February 2007, 08:21:36
SKF belts are fine....but not genuine and hence arguably not as described.....
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 21 February 2007, 08:25:12
Quote
I am genuinely gutted that I cannot make it this weekend. I am booked up for lessons on Saturday :(

I will however have a break at lunch, so I will call at least to say hello to the gang.

Good luck to everyone. Should be a great day all round and I will be laughing at thinking about you all.

 :y
May well be a webcam set up for you to laugh at see whats going on...
Title: Re: V6 Cambelt party - Brackley
Post by: MaxV6 on 21 February 2007, 09:38:53
just got back from market........  We have Cumberland Sausages, Rib Eye Steak, Pork Loin (I'll slice it into steaks probably) Lamb Chops and Chicken Breast Fillets.

should get the ball rolling


:D

Max
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 21 February 2007, 09:44:31
Quote
just got back from market........  We have Cumberland Sausages, Rib Eye Steak, Pork Loin (I'll slice it into steaks probably) Lamb Chops and Chicken Breast Fillets.

should get the ball rolling


:D

Max
Sounds good :)

Gonna go down Costco tomorrow and stock up on soft drinks for those that have to travel. Thinking along lines of 7-up, Pepsi Max, Coke.  Anything else I need to get in?

I'll also stock up on kitchen roll, as always get through tonnes of the stuff working on cars...
Title: Re: V6 Cambelt party - Brackley
Post by: Phil on 21 February 2007, 09:45:00
Quote
Right, parts wise, I have got a cambelt kit and aux belt for MaxV6.  Waterpumps appear to be in short supply around here.

Has everyone else managed to arrange their parts?

Already had the cambelt kit, it would appear ive found a dealer who will have the water pump in for me in the morning, but we all know what Vxl parts are like!!

They did mention something about 3 new bolts also required, is this true?????
Title: Re: V6 Cambelt party - Brackley
Post by: theolodian on 21 February 2007, 09:46:16
Quote
Quote
just got back from market........  We have Cumberland Sausages, Rib Eye Steak, Pork Loin (I'll slice it into steaks probably) Lamb Chops and Chicken Breast Fillets.

should get the ball rolling


:D

Max
Sounds good :)

Gonna go down Costco tomorrow and stock up on soft drinks for those that have to travel. Thinking along lines of 7-up, Pepsi Max, Coke.  Anything else I need to get in?

I'll also stock up on kitchen roll, as always get through tonnes of the stuff working on cars...
Paper plates?  All sounds good to me!  Also, feel free to delegate, I'm happy to grab whatever.
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 21 February 2007, 09:46:58
Quote
They did mention something about 3 new bolts also required, is this true?????
One for Marks_DTM I think.

I haven't ever specifically bought bolts for water pumps, so either they come with it (along with the seal), or I have reused existing...
Title: Re: V6 Cambelt party - Brackley
Post by: theolodian on 21 February 2007, 09:48:14
Quote
Quote
Right, parts wise, I have got a cambelt kit and aux belt for MaxV6.  Waterpumps appear to be in short supply around here.

Has everyone else managed to arrange their parts?

Already had the cambelt kit, it would appear ive found a dealer who will have the water pump in for me in the morning, but we all know what Vxl parts are like!!

They did mention something about 3 new bolts also required, is this true?????
Only if Timbuk touches it  :o

I didn't replace any bolts that didn't come with the pump.

I don't have a TC card, but if anyone is desperate I can see if the local stealership has what you need and bring it down.
Title: Re: V6 Cambelt party - Brackley
Post by: Marks DTM Calib on 21 February 2007, 09:49:01
Quote
They did mention something about 3 new bolts also required, is this true?????

Not essential....a bit of threadlock and the correct torque does the job nicely.
Title: Re: V6 Cambelt party - Brackley
Post by: theolodian on 21 February 2007, 09:57:28
Quote
Quote
They did mention something about 3 new bolts also required, is this true?????

Not essential....a bit of threadlock and the correct torque does the job nicely.
Threadlock?  Right torque?  Didn't happen on my waterpump.  ::)  The 'proper torque' fell between what the small and large torque wrenches I had could do.

Speaking of, who's gonna bone up on the DVD before this weekend?  Obviously not the experts, but some of us probably should  :P
Title: Re: V6 Cambelt party - Brackley
Post by: Bo Bo on 21 February 2007, 09:57:36
Just phoned Vx & they have the gaskets but no O rings or sealant, they say they'll have them by Fri, cutting it a bit fine but, hey that's Vx!
Title: Re: V6 Cambelt party - Brackley
Post by: theolodian on 21 February 2007, 10:05:59
Quote
Just phoned Vx & they have the gaskets but no O rings or sealant, they say they'll have them by Fri, cutting it a bit fine but, hey that's Vx!
Make sure they gave you all the gaskets, they swore they gave me the full set but it was only one side.
Title: Re: V6 Cambelt party - Brackley
Post by: Bo Bo on 21 February 2007, 10:18:27
Quote
Quote
Just phoned Vx & they have the gaskets but no O rings or sealant, they say they'll have them by Fri, cutting it a bit fine but, hey that's Vx!
Make sure they gave you all the gaskets, they swore they gave me the full set but it was only one side.
Cheers, I'll make sure I ask.
Just remembered there is another dealer nearby & they have everything so I'll pick them up on my way home.
Title: Re: V6 Cambelt party - Brackley
Post by: Marks DTM Calib on 21 February 2007, 10:18:59
I have got sealent so dont worry about getting that....
Title: Re: V6 Cambelt party - Brackley
Post by: Bo Bo on 21 February 2007, 10:20:50
Quote
I have got sealent so dont worry about getting that....
Cheers  :y
Title: Re: V6 Cambelt party - Brackley
Post by: theolodian on 21 February 2007, 10:25:14
Quote
Quote
Quote
Just phoned Vx & they have the gaskets but no O rings or sealant, they say they'll have them by Fri, cutting it a bit fine but, hey that's Vx!
Make sure they gave you all the gaskets, they swore they gave me the full set but it was only one side.
Cheers, I'll make sure I ask.
Just remembered there is another dealer nearby & they have everything so I'll pick them up on my way home.
Don't ask, that was my mistake!  Take them out of the bags and check yourself.
Title: Re: V6 Cambelt party - Brackley
Post by: tunnie on 21 February 2007, 10:35:18
Quote
Quote
Quote
Quote
We have a V6 at the 2.2 party since the V6 location is full!!!

Nothing wrong with the 4pots, I get 10mpg better at 80+ in the 2.2 compared to the Senator!
.... apparently if you take your foot off the accelerator in the sennie the MPG improves  ;)

I'll be bringing (but not using) my locking kit & 30mm spanner so they can be used at either location (or both) ...

I managed to squeeze 37 mpg from the Senator on the run back to uni, but that was doing 65 mph all the way back!

I can get 36mpg doing 85mph with 3 people in the car in the 2.2 on a motorway run!

That extra kit will come in handy! Thanks!  :y
It should get more economical after every speed bump, as more and more bits/rust fall off....


Ohh ha de ha ha  >:(
Title: Re: V6 Cambelt party - Brackley
Post by: tunnie on 21 February 2007, 10:36:27
can I ask how many V6 locking kits do you have?

Is anyone bringing their own down?
Title: Re: V6 Cambelt party - Brackley
Post by: Bo Bo on 21 February 2007, 10:37:31
Quote
Quote
Quote
Quote
Just phoned Vx & they have the gaskets but no O rings or sealant, they say they'll have them by Fri, cutting it a bit fine but, hey that's Vx!
Make sure they gave you all the gaskets, they swore they gave me the full set but it was only one side.
Cheers, I'll make sure I ask.
Just remembered there is another dealer nearby & they have everything so I'll pick them up on my way home.
Don't ask, that was my mistake!  Take them out of the bags and check yourself.
OK, silly question but what exactly am I looking for?
Title: Re: V6 Cambelt party - Brackley
Post by: x25xe on 21 February 2007, 10:40:23
Is there anything that anyone needs me to bring?  I have a Vaux dealer just up the road from me and if people who can not get hold of parts, I will be glad to see if they have in stock and get whatever is required ;)

Similarly, if Axel Stands are required, a jack, breaker bars etc, I will be pleased to assist.

Just let me know. ;)

Looking forward to the day and to meeting you all. :) :)
Title: Re: V6 Cambelt party - Brackley
Post by: Phil on 21 February 2007, 10:45:45
Quote
can I ask how many V6 locking kits do you have?

Is anyone bringing their own down?


I have one Sykes P one and i will be bringing it, well it cost me £50 so i might aswell get my monies worth  ;D
Title: Re: V6 Cambelt party - Brackley
Post by: theolodian on 21 February 2007, 10:57:22
Quote
Quote
Quote
Quote
Quote
Just phoned Vx & they have the gaskets but no O rings or sealant, they say they'll have them by Fri, cutting it a bit fine but, hey that's Vx!
Make sure they gave you all the gaskets, they swore they gave me the full set but it was only one side.
Cheers, I'll make sure I ask.
Just remembered there is another dealer nearby & they have everything so I'll pick them up on my way home.
Don't ask, that was my mistake!  Take them out of the bags and check yourself.
OK, silly question but what exactly am I looking for?
Black wiggly bits?!

IIRC there are 2 gaskets per side, so 4 in total.  Mainly, just be sure that you have enough gaskets for 2 full loops.  It should be easy to tell.
Title: Re: V6 Cambelt party - Brackley
Post by: Kevin Wood on 21 February 2007, 10:57:59
Quote
Is there anything that anyone needs me to bring?

Same goes for me. I haven't got cam locking kits and the like but I've got most general purpose tools and I'll try and bring a selection of bits and pieces. I guess even if we're short of locking kits, if we've got a good supply of sockets, torque wrenches, etc the more cars we can prep. for the belt change in parallel.

Downside to this is that we could end up trying to sort out a great big pile of tools at the end of the day if we're not careful! One toolkit working on one car at a time might be a good rule!

Kevin

Title: Re: V6 Cambelt party - Brackley
Post by: Bo Bo on 21 February 2007, 11:02:20
Quote
Quote
Quote
Quote
Quote
Quote
Just phoned Vx & they have the gaskets but no O rings or sealant, they say they'll have them by Fri, cutting it a bit fine but, hey that's Vx!
Make sure they gave you all the gaskets, they swore they gave me the full set but it was only one side.
Cheers, I'll make sure I ask.
Just remembered there is another dealer nearby & they have everything so I'll pick them up on my way home.
Don't ask, that was my mistake!  Take them out of the bags and check yourself.
OK, silly question but what exactly am I looking for?
Black wiggly bits?!

IIRC there are 2 gaskets per side, so 4 in total.  Mainly, just be sure that you have enough gaskets for 2 full loops.  It should be easy to tell.
Hhhmm......
Title: Re: V6 Cambelt party - Brackley
Post by: tunnie on 21 February 2007, 11:09:33
Kevin, x25xe...

I have most tools, but I don't have a torque wrench! - It may come in handy if you have one  :y

I have everything else, that Halfords 150 piece set, axel stands and such....

I have a jack, but its one of the small ones. Not a decent 'man' one like Mark has  ;D
Title: Re: V6 Cambelt party - Brackley
Post by: Marks DTM Calib on 21 February 2007, 11:15:58
Quote
I have a jack, but its one of the small ones. Not a decent 'man' one like Mark has  ;D


One needs a jack that matches ones body profile....hence yours is the correct one for you.... ;D
Title: Re: V6 Cambelt party - Brackley
Post by: x25xe on 21 February 2007, 11:16:36
Quote
Quote
Is there anything that anyone needs me to bring?

Same goes for me. I haven't got cam locking kits and the like but I've got most general purpose tools and I'll try and bring a selection of bits and pieces. I guess even if we're short of locking kits, if we've got a good supply of sockets, torque wrenches, etc the more cars we can prep. for the belt change in parallel.

Downside to this is that we could end up trying to sort out a great big pile of tools at the end of the day if we're not careful! One toolkit working on one car at a time might be a good rule!

Kevin


I have the same selection of tools and agree about one tookit per car.  I will bring what I have, including my jack.  This is old and bashed and has seen lots of action.  It needs replacing really - so no laughing at it!!!
Title: Re: V6 Cambelt party - Brackley
Post by: Kevin Wood on 21 February 2007, 11:18:56
I can bring a couple of torque wrenches. I've got a 1/2" and a 3/8".

I've also got a trolley jack. It's heavy, not pretty, it's cheap but it just about does the job (what was that about body profile?).

I'll also collect up as many Torx sockets, etc. as I can.

Kevin
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 21 February 2007, 11:47:18
Quote
Quote
I have a jack, but its one of the small ones. Not a decent 'man' one like Mark has  ;D


One needs a jack that matches ones body profile....hence yours is the correct one for you.... ;D
PMSL - you owe me a new keyboard now - just sprayed coffe all over it

For me, I don't think they make a jack with the right 'profile' ::)
Title: Re: V6 Cambelt party - Brackley
Post by: tunnie on 21 February 2007, 11:48:33
Quote
Quote
I have a jack, but its one of the small ones. Not a decent 'man' one like Mark has  ;D


One needs a jack that matches ones body profile....hence yours is the correct one for you.... ;D

 ;D ;D

My jack is thin (got that bit right) but its not long enough for me to jack the front crossbeam!
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 21 February 2007, 11:48:42
Quote
Quote
Quote
Quote
Quote
Just phoned Vx & they have the gaskets but no O rings or sealant, they say they'll have them by Fri, cutting it a bit fine but, hey that's Vx!
Make sure they gave you all the gaskets, they swore they gave me the full set but it was only one side.
Cheers, I'll make sure I ask.
Just remembered there is another dealer nearby & they have everything so I'll pick them up on my way home.
Don't ask, that was my mistake!  Take them out of the bags and check yourself.
OK, silly question but what exactly am I looking for?
4 big gaskets.  Basically, check you have 4 'half moon' bits in there (1 half moon per gasket).  Also need 16 small o rings for cam cover bolts...
Title: Re: V6 Cambelt party - Brackley
Post by: Marks DTM Calib on 21 February 2007, 12:06:19
This one is rather nice:

(http://www.sealey.co.uk/Images/Products/4001.jpg)
Title: Re: V6 Cambelt party - Brackley
Post by: x25xe on 21 February 2007, 12:58:19
How much for that and where from??  Is it quick lift?
Title: Re: V6 Cambelt party - Brackley
Post by: AndersH on 21 February 2007, 13:29:30
Am I the only one worried that my cambelt is going to go on the way to the party on Saturday?!  :o
Title: Re: V6 Cambelt party - Brackley
Post by: Jimbob on 21 February 2007, 13:40:20
Quote
Am I the only one worried that my cambelt is going to go on the way to the party on Saturday?!  :o


Don't tempt fate!
Title: Re: V6 Cambelt party - Brackley
Post by: ClarCE on 21 February 2007, 13:46:33
haha, nope - I seem to get a lot of 'sods law' luck..
Title: Re: V6 Cambelt party - Brackley
Post by: Elite Pete on 21 February 2007, 13:58:50
Quote
Am I the only one worried that my cambelt is going to go on the way to the party on Saturday?!  :o
:o :-X ;D
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 21 February 2007, 14:09:37
Quote
Am I the only one worried that my cambelt is going to go on the way to the party on Saturday?!  :o
Don't even go there....   ....just thinking about it will tempt fate....
Title: Re: V6 Cambelt party - Brackley
Post by: Bo Bo on 21 February 2007, 15:39:51
OK I have the gaskets & O rings  :y
The guy seemed to know what he was doing, I gave him the part no's & he asked what car & engine & then if I was doing both sides, I said yes & off he went & came back with two gasket packs & 16 O rings.
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 21 February 2007, 16:42:56
Quote
OK I have the gaskets & O rings  :y
The guy seemed to know what he was doing, I gave him the part no's & he asked what car & engine & then if I was doing both sides, I said yes & off he went & came back with two gasket packs & 16 O rings.
Double check you have got 4 gaskets - I seem to recall they are sold individually, and 4 required, though an EPC error implies only 2 required...
Title: Re: V6 Cambelt party - Brackley
Post by: Marks DTM Calib on 21 February 2007, 16:44:40
They are sold in pairs (the two halves are different), each bag should have two gaskets in them
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 21 February 2007, 16:45:55
Quote
They are sold in pairs (the two halves are different), each bag should have two gaskets in them
Ta, thanks for clarification :y
Title: Re: V6 Cambelt party - Brackley
Post by: Bo Bo on 21 February 2007, 17:23:14
Quote
Quote
OK I have the gaskets & O rings  :y
The guy seemed to know what he was doing, I gave him the part no's & he asked what car & engine & then if I was doing both sides, I said yes & off he went & came back with two gasket packs & 16 O rings.
Double check you have got 4 gaskets - I seem to recall they are sold individually, and 4 required, though an EPC error implies only 2 required...
Yep four gaskets, I opened the packs just to make sure....
Title: Re: V6 Cambelt party - Brackley
Post by: Bo Bo on 21 February 2007, 17:25:52
Quote
They are sold in pairs (the two halves are different), each bag should have two gaskets in them
He also said that they're not available separately for the really early models any more & that you have to get new covers?
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 21 February 2007, 18:16:46
OK, I haven't heard any more, so just checking that everyone has got all the bits they need.

The only stuff I have got is a cambelt kit, Aux belt, and antifreeze for MaxV6 (no waterpump yet Max - have you made other arrangements, or shall I try Banbury)

I have 2 or 3 bottles of antifreeze in garage, plenty of oil, some spin on oil filters etc, and 2 or 3 cans of carb cleaner.

Hopefully, everyone else has arranged their parts?  If not, let me know, I may be able to get to a dealers tomorrow.
Title: Re: V6 Cambelt party - Brackley
Post by: AndersH on 21 February 2007, 18:22:34
Sorry if I'm being a bit thick, do I need antifreeze for a cambelt change?  :-[
Title: Re: V6 Cambelt party - Brackley
Post by: Bo Bo on 21 February 2007, 18:24:39
Weather (http://www.metcheck.com/V40/UK/FREE/dayforecast.asp?zipcode=Brackley&day=3) forecast has changed slightly, looking like the earlier the better, although still not too bad...
Title: Re: V6 Cambelt party - Brackley
Post by: Bo Bo on 21 February 2007, 18:25:58
Quote
Sorry if I'm being a bit thick, do I need antifreeze for a cambelt change?  :-[
You do if changing the waterpump as well....
Title: Re: V6 Cambelt party - Brackley
Post by: Markjay on 21 February 2007, 18:26:54
Quote
Sorry if I'm being a bit thick, do I need antifreeze for a cambelt change?  :-[

Yes if doing the water pump at the same time... which is highly recommended as it will never be so easy to get it out again...
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 21 February 2007, 18:37:40
Quote
Sorry if I'm being a bit thick, do I need antifreeze for a cambelt change?  :-[
I would recommend a waterpump every other cambelt, so its up to you if you want to change the waterpump. If you do, its around £25 + VAT for waterpump and around £8 + VAT for 'Red' antifreeze at TC prices...
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 21 February 2007, 19:30:30
Quote
So, currently we have the following experts lending a hand:
Marks_DTM_Calib
Laidback66
Me (expert in the loose sense ;))

And the following coming:
MaxV6 (Confirmed) - Cambelt, waterpump, handbrake, HID fix - Parts, I will get
Theolodian (Confirmed) - HID fix, G/box update - Parts, N/A
Manbafia (Confirmed) - Cambelt, waterpump - Parts, member will get
BazMV6 (Confirmed) - a check over - Parts, N/A
Kevin Wood (Confirmed) - Cruise enable - Parts, member will get stalk.
SteveD (Possible) - Autobox s/w update - Parts, N/A
Sounds2k (Confirmed) - Autobox s/w - Parts, N/A
Phil (Confirmed) - Cambelt, waterpump - Parts, memeber will get
Bo Bo (Confirmed) - Cam cover gaskets, climate bulbs - Parts, member will get
Elite Pete (Confirmed) - Cambelt, waterpump - Parts, member will get
x25xe (Confirmed) - Tech2 check, autobox s/w - Parts, N/A

And following just to say hello...
Timbuk (Confirmed)
MickDundee (Confirmed)
Those above please confirm if you're coming, and confirm the list above is correct please.


******************

This event is now full

******************

OK, everyone who is confirmed in list above should now have a PM with address and Multimap location.
Title: Re: V6 Cambelt party - Brackley
Post by: MaxV6 on 21 February 2007, 20:07:21
Quote
OK, I haven't heard any more, so just checking that everyone has got all the bits they need.

The only stuff I have got is a cambelt kit, Aux belt, and antifreeze for MaxV6 (no waterpump yet Max - have you made other arrangements, or shall I try Banbury)


Jaime,  I think Lb66 has it covered, I'll drop him a line to double check....

Max
Title: Re: V6 Cambelt party - Brackley
Post by: Admin on 21 February 2007, 20:12:49
Yep got it covered, along with anti freeze. :)
Title: Re: V6 Cambelt party - Brackley
Post by: MaxV6 on 21 February 2007, 20:19:43
Flippin eck that were quick D.

so quick, i haven't even finished writing the line......  


is it like a Pratchett/Disc World reverse hangover thing......

if i now don;t send the separate "line" will it give you an awful temporal lobe headache.... one where you have to take paradoxemol to settle it??



Sorry....    i'm obviously working from a  tangental interface with reality tonight.,..

Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 21 February 2007, 20:22:25
Quote
Flippin eck that were quick D.

so quick, i haven't even finished writing the line......  


is it like a Pratchett/Disc World reverse hangover thing......

if i now don;t send the separate "line" will it give you an awful temporal lobe headache.... one where you have to take paradoxemol to settle it??



Sorry....    i'm obviously working from a  tangental interface with reality tonight.,..

Have you been taking RonaldMcB's tablets  :o
Title: Re: V6 Cambelt party - Brackley
Post by: AndersH on 21 February 2007, 20:27:14
Quote
Quote
Sorry if I'm being a bit thick, do I need antifreeze for a cambelt change?  :-[
I would recommend a waterpump every other cambelt, so its up to you if you want to change the waterpump. If you do, its around £25 + VAT for waterpump and around £8 + VAT for 'Red' antifreeze at TC prices...

Ok thanks. I do have a water pump to put on, sorry it's short notice as I didn't realise but would you (or anyone else) be able to get me some antifreeze if possible?
I'd be most grateful - thanks!  :y
If not I'll have to try and get some Friday lunch time, how much without a TC?
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 21 February 2007, 20:28:35
Quote
Quote
Quote
Sorry if I'm being a bit thick, do I need antifreeze for a cambelt change?  :-[
I would recommend a waterpump every other cambelt, so its up to you if you want to change the waterpump. If you do, its around £25 + VAT for waterpump and around £8 + VAT for 'Red' antifreeze at TC prices...

Ok thanks. I do have a water pump to put on, sorry it's short notice as I didn't realise but would you (or anyone else) be able to get me some antifreeze if possible?
I'd be most grateful - thanks!  :y
If not I'll have to try and get some Friday lunch time, how much without a TC?
We should have enough antifreeze.... :)
Title: Re: V6 Cambelt party - Brackley
Post by: MaxV6 on 21 February 2007, 20:43:32
Quote
Have you been taking RonaldMcB's tablets  :o


I have my very own supply of a cocktail of space cadet brain inhibitor pills.


as is, I suppose hardly noteworthy, given the spinal thingy....

I think it was LB66 who remarked how much similarity i had to RMcB at times...   I think it may be the drugs that do it... :D

Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 21 February 2007, 20:45:58
Quote
I think it was LB66 who remarked how much similarity i had to RMcB at times...
You dance like a chicken ?  :o  :o
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 21 February 2007, 20:57:48
Right, for those who plan on having a beer or several, it appears the local hotel is now fully booked.  There may be a chance for a very limited number of people to stay at mine.  Let me know if this is required, and I'll see what we can do...
Title: Re: V6 Cambelt party - Brackley
Post by: MaxV6 on 21 February 2007, 21:00:02
Quote
Quote
I think it was LB66 who remarked how much similarity i had to RMcB at times...
You dance like a chicken ?  :o  :o
 well obviously....



:D

it's primarily that disorder that encouraged me to become a musician./  you don;t have to actually dance while on stage.....    but the audience does.



HA HA


funk-metal = Payback....


:D

then i grew up.

got a hair cut.

some letters after me name

and someone told me i had 5 kids.



Title: Re: V6 Cambelt party - Brackley
Post by: theolodian on 21 February 2007, 21:43:18
Quote
Flippin eck that were quick D.

so quick, i haven't even finished writing the line......  


is it like a Pratchett/Disc World reverse hangover thing......

if i now don;t send the separate "line" will it give you an awful temporal lobe headache.... one where you have to take paradoxemol to settle it??



Sorry....    i'm obviously working from a  tangental interface with reality tonight.,..

Ah, another Morporkian!  Cool  :y
Title: Re: V6 Cambelt party - Brackley
Post by: Bo Bo on 21 February 2007, 21:46:27
Quote
Quote
Flippin eck that were quick D.

so quick, i haven't even finished writing the line......  


is it like a Pratchett/Disc World reverse hangover thing......

if i now don;t send the separate "line" will it give you an awful temporal lobe headache.... one where you have to take paradoxemol to settle it??



Sorry....    i'm obviously working from a  tangental interface with reality tonight.,..

Ah, another Morporkian!  Cool  :y
Funny that, sat here reading Thief of Time (& popping in here)......
Title: Re: V6 Cambelt party - Brackley
Post by: theolodian on 21 February 2007, 21:50:49
Quote
Quote
Quote
Flippin eck that were quick D.

so quick, i haven't even finished writing the line......  


is it like a Pratchett/Disc World reverse hangover thing......

if i now don;t send the separate "line" will it give you an awful temporal lobe headache.... one where you have to take paradoxemol to settle it??



Sorry....    i'm obviously working from a  tangental interface with reality tonight.,..

Ah, another Morporkian!  Cool  :y
Funny that, sat here reading Thief of Time (& popping in here)......
You must like 'Going Postal'  :D  There's so many good ones.
Title: Re: V6 Cambelt party - Brackley
Post by: MaxV6 on 21 February 2007, 22:57:52
Actually from Llamedos originally....

:D

we have them all.....  and all the side projects, like science of the disk world 1-4 and so on....

it is however, contrary to popular belief,  entirely a co-incidence that like the master wordsmith,  we also have a daughter called Rhianna....    didn't realise till after ours was born and named.....

Title: Cambelt party - Brackley CATERING ARRANGEMENTS
Post by: MaxV6 on 21 February 2007, 23:27:48
It appears that I've suddenly been promoted form keen donator and cremator of some dead animals and supplier of some beer , to general quartermaster for the catering division of Meega cambelts R US .  TB seems to think I've actually counted the number of people coming....

Since there appear to be quite a few of us descending on the neighbourhood and terrorising the locals, it might be a good idea if we co-ordinate at least some of the available grub and liquid.

I have thus far obtained a couple of dozen Cumberland sausages, a number of Rib eye Steaks (number decided when I actually cut the Steaks off the slab) , a Loin and a half  of Pork (likewise in slab form until I decide how to cook it)  and about 2 dozen lamb chops and a dozen or So Chicken Breast fillets.

and I have 2/3rds of a large bottle of Gas...

and a dozen or two  Beers of assorted descriptions form my Fridge stock.

I will also bring a large pack of Bacon for earlier requirements.

it would be useful if those wishing to contribute , could perhaps all agree what we're bringing....  so we don;t find ourselves with 6000 buns and no burgers or ketchup.

I don't want to pressure anyone into donating more than they're able, or comfortable with....   but please be aware that we probably all owe TB and co several slap up meals....     and shouldn't really expect them to feed us all as well as fix our meegas ;)  so just check out how many people are confirmed as coming to the 2 locations, and gathering later , and kind of bear it in mind...



So, thus far

MaxV6 : A Fair bit of Meat, and Some beer.
Kev Wood : Some bread like things , possibly in the shape of wraps/tortillas

Volunteers might like to consider the following, none should be considered as a show stopping essential

Actual burgers
Buns
Cheese
Wimpy green stuff like Salad?
Spuds for baking?
biscuits?
ketchups and sauces
more beer
Wine
a cake?

any other suggestions welcome.....  

TB may decide to make this a separate thread ....   I couldn't decide one way or another..



Max
Title: Re: V6 Cambelt party - Brackley
Post by: AndersH on 21 February 2007, 23:54:54
I've got a cake sorted, what party would go well without cake?! I could also sort biscuits out.
Title: Re: Cambelt party - Brackley CATERING ARRANGEMENTS
Post by: MaxV6 on 22 February 2007, 00:32:55
Quote
So, thus far

MaxV6 : A Fair bit of Meat, and Some beer.
Kev Wood : Some bread like things , possibly in the shape of wraps/tortillas
Mambafia : Cake and some Biccies

Volunteers might like to consider the following, none should be considered as a show stopping essential

Actual burgers
Buns
Cheese
Wimpy green stuff like Salad?
Spuds for baking?
ketchups and sauces
more beer
Wine


any other suggestions welcome.....  

TB may decide to make this a separate thread ....   I couldn't decide one way or another..



Max
Title: Re: V6 Cambelt party - Brackley
Post by: x25xe on 22 February 2007, 12:03:33
Quote
It would be useful if those wishing to contribute , could perhaps all agree what we're bringing....  so we don;t find ourselves with 6000 buns and no burgers or ketchup.

I don't want to pressure anyone into donating more than they're able, or comfortable with....   but please be aware that we probably all owe TB and co several slap up meals....     and shouldn't really expect them to feed us all as well as fix our meegas ;)  so just check out how many people are confirmed as coming to the 2 locations, and gathering later , and kind of bear it in mind...



So, thus far

MaxV6 : A Fair bit of Meat, and Some beer.
Kev Wood : Some bread like things , possibly in the shape of wraps/tortillas

Volunteers might like to consider the following, none should be considered as a show stopping essential

Actual burgers
Buns
Cheese
Wimpy green stuff like Salad?
Spuds for baking?
biscuits?
ketchups and sauces
more beer
Wine
a cake?

any other suggestions welcome.....  

TB may decide to make this a separate thread ....   I couldn't decide one way or another..



Max

Fully agree with the above. :)  I will be happy to provide some burgers, biscuits and salad stuff along with some soft drink (as I don't drink beer and will be driving home again).  It looks as though there will be 16 people around at various times of the day, so I suggest cater for 20.

If a definitave list is to be produced, put me down for the burgers etc.  If I don't hear to the contary, then I will bring what I have listed ;).  Hope this is OK.
Title: Re: Cambelt party - Brackley CATERING ARRANGEMENTS
Post by: MaxV6 on 22 February 2007, 12:18:38

Cheers x25   :D

Quote
Quote
So, thus far

MaxV6 : A Fair bit of Meat, and Some beer.
Kev Wood : Some bread like things , possibly in the shape of wraps/tortillas
Mambafia : Cake and some Biccies
x25xe : Burgers + Salad

Volunteers might like to consider the following, none should be considered as a show stopping essential


Buns
Cheese
Wimpy green stuff like Salad?
Spuds for baking?
ketchups and sauces
more beer
Wine


any other suggestions welcome.....  

TB may decide to make this a separate thread ....   I couldn't decide one way or another..



Max



Please Note, I have started a separate thread so as to include the 4 pot party in this.


Could any further volunteering be done there please, so i can stay on top of it all.

Thanks muchly to all concerned.

max
Title: Re: V6 Cambelt party - Brackley
Post by: Darth Loo-knee on 22 February 2007, 14:06:31
Going to try and do my breathers and rocker cover gaskets on friday so i can come down and meet you guys, (thought it would be a bit cheeky to ask if you could do it for me while there) ;D
can anyone PM me with an address and maybe a mobile number in case i get a little lost??

Title: Re: V6 Cambelt party - Brackley
Post by: AndersH on 22 February 2007, 18:01:36
Just trying to work out when to arrive, how long should a car need to cool down for before taking it to bits?
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 22 February 2007, 18:48:19
Quote
Going to try and do my breathers and rocker cover gaskets on friday so i can come down and meet you guys, (thought it would be a bit cheeky to ask if you could do it for me while there) ;D
can anyone PM me with an address and maybe a mobile number in case i get a little lost??

We cannot fit in any more work at either event I'm afraid.  No probs if you want to turn up to say hello though, although you may have to park around Tunnies and walk ;D as parking is going to be very tight around mine...
Title: Re: V6 Cambelt party - Brackley
Post by: tunnie on 22 February 2007, 19:31:36
Quote
Quote
Going to try and do my breathers and rocker cover gaskets on friday so i can come down and meet you guys, (thought it would be a bit cheeky to ask if you could do it for me while there) ;D
can anyone PM me with an address and maybe a mobile number in case i get a little lost??

We cannot fit in any more work at either event I'm afraid.  No probs if you want to turn up to say hello though, although you may have to park around Tunnies and walk ;D as parking is going to be very tight around mine...

Reasonable rates available for 6 pots.....  ;)
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 22 February 2007, 19:45:38
OK, for a giggle, we may set up a webcam.  Preliminary testing of this shows it doesn't work with certain ISPs, but I haven't really got time to look into it....
Title: Re: V6 Cambelt party - Brackley
Post by: Marks DTM Calib on 22 February 2007, 19:52:00
Quote
Going to try and do my breathers and rocker cover gaskets on friday so i can come down and meet you guys, (thought it would be a bit cheeky to ask if you could do it for me while there) ;D
can anyone PM me with an address and maybe a mobile number in case i get a little lost??


If you dont get them done then pop down anyway.....
Title: Re: V6 Cambelt party - Brackley
Post by: Timbuk on 22 February 2007, 19:53:46
Quote
Quote
Going to try and do my breathers and rocker cover gaskets on friday so i can come down and meet you guys, (thought it would be a bit cheeky to ask if you could do it for me while there) ;D
can anyone PM me with an address and maybe a mobile number in case i get a little lost??


If you dont get them done then pop down anyway.....


You just can't resist , can you Mark ::)
Title: Re: V6 Cambelt party - Brackley
Post by: MaxV6 on 22 February 2007, 20:37:00
Well......  as it bloody stands,   if things don't improve "over the road" , I may end up coming in the Pug106 , and just partying for the day.... not having a means to tow the Meega (although I'll give CornishTaz a yell, he has a rigid towing bar. ... )

Messr's Hall & son have thus far STILL failed to accurately identify the leak....   having even sent out and got some tracer dye... yes they tried pressurising correctly, but it wasn't possible to actually see a straight forward hose leak....  THEN they tried the engine running to get steam...   as it's sometimes potentially easier to spot the source than a relatively slow moving leak ...

the current thinking on their part is head gasket, or maybe a core plug, or something....  the leak would appear to be coming from towards the top of the block on the near side , running down , finding it's way onto the exhaust, and then creating steam to confuse things....

They say they're certain it's not actually coming from the back of the engine itself....  so all the usual HBV and V-Bridge etc sources are out...

although I did just point out a couple of things they hadn't yet tried, potentially something relating to the main transfer pipe union , or something else with O rings on it

They've had the meega since yesterday lunchtime.....  

I'm gonna get a fat great bill for this, I can just tell.

Coupled with Mark's comments from last week, I'm rapidly losing faith in their abilities and , perhaps even their honesty.....   but there's sweet FA i can do about it right this minute.


What we've agreed would be REALLY useful is some sort of flow diagram showing the entire cooling and heater system flow and hardware.....   making it easier to ensure nothing gets over looked....

as it is, Both Car-data, and Haynes are virtually useless , with little real detail in explanations or descriptions, and the photo's are of such poor quality in both, and printed on such poor paper in Haynes as to be potentially worse than useless.

I kind of wish I could rely on it to get to Brackley.... to find out if it really IS that mysteriously difficult to trace, or whether they are in fact taking advantage of my good nature and urgent need.
if the former, then Mark would have added to his vast store of knowledge , and if the latter I would know not to trust them any more....   so service and MOT work could go elsewhere.

at about £50 an hour, i really don't need this

it might just be cheaper to scrap it and buy another Omega.

or , god forbid, something else a little more reliable.

Like maybe Tunnie's Senator.....  

(bad joke, i NEED an estate)




Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 22 February 2007, 21:07:07
Quote
Well......  as it bloody stands,   if things don't improve "over the road" , I may end up coming in the Pug106 , and just partying for the day.... not having a means to tow the Meega (although I'll give CornishTaz a yell, he has a rigid towing bar. ... )

Messr's Hall & son have thus far STILL failed to accurately identify the leak....   having even sent out and got some tracer dye... yes they tried pressurising correctly, but it wasn't possible to actually see a straight forward hose leak....  THEN they tried the engine running to get steam...   as it's sometimes potentially easier to spot the source than a relatively slow moving leak ...

the current thinking on their part is head gasket, or maybe a core plug, or something....  the leak would appear to be coming from towards the top of the block on the near side , running down , finding it's way onto the exhaust, and then creating steam to confuse things....

They say they're certain it's not actually coming from the back of the engine itself....  so all the usual HBV and V-Bridge etc sources are out...

although I did just point out a couple of things they hadn't yet tried, potentially something relating to the main transfer pipe union , or something else with O rings on it

They've had the meega since yesterday lunchtime.....  

I'm gonna get a fat great bill for this, I can just tell.

Coupled with Mark's comments from last week, I'm rapidly losing faith in their abilities and , perhaps even their honesty.....   but there's sweet FA i can do about it right this minute.


What we've agreed would be REALLY useful is some sort of flow diagram showing the entire cooling and heater system flow and hardware.....   making it easier to ensure nothing gets over looked....

as it is, Both Car-data, and Haynes are virtually useless , with little real detail in explanations or descriptions, and the photo's are of such poor quality in both, and printed on such poor paper in Haynes as to be potentially worse than useless.

I kind of wish I could rely on it to get to Brackley.... to find out if it really IS that mysteriously difficult to trace, or whether they are in fact taking advantage of my good nature and urgent need.
if the former, then Mark would have added to his vast store of knowledge , and if the latter I would know not to trust them any more....   so service and MOT work could go elsewhere.

at about £50 an hour, i really don't need this

it might just be cheaper to scrap it and buy another Omega.

or , god forbid, something else a little more reliable.

Like maybe Tunnie's Senator.....  

(bad joke, i NEED an estate)




Bugger.

I'm sure Marks_DTM would be able to quickly diagnose, but does mean getting it here...
Title: Re: V6 Cambelt party - Brackley
Post by: theolodian on 22 February 2007, 21:19:48
Re-task a few of the brekkie eggs?

Wish I had a better suggestion.  :-/
Title: Re: V6 Cambelt party - Brackley
Post by: tunnie on 22 February 2007, 21:34:31
hummm thats a bugger Max....

I am coming home myself on Friday afternoon, its not much of a de-tour to go via Oxford.

If you can get your hands on a ridged tow bar, or even a rope. I can pop by in the Senny, and we can tow it to Brackley  :y
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 22 February 2007, 21:40:24
Quote
hummm thats a bugger Max....

I am coming home myself on Friday afternoon, its not much of a de-tour to go via Oxford.

If you can get your hands on a ridged tow bar, or even a rope. I can pop by in the Senny, and we can tow it to Brackley  :y
Thats a long way on a rope.... ...A34/M40 in rush hour (ie most of Friday afternoon/evening)
Title: Re: V6 Cambelt party - Brackley
Post by: tunnie on 22 February 2007, 21:45:14
Quote
Quote
hummm thats a bugger Max....

I am coming home myself on Friday afternoon, its not much of a de-tour to go via Oxford.

If you can get your hands on a ridged tow bar, or even a rope. I can pop by in the Senny, and we can tow it to Brackley  :y
Thats a long way on a rope.... ...A34/M40 in rush hour (ie most of Friday afternoon/evening)

Not sure where Max.... but its a shame for his megga to miss out on Saturday. It was originally planned for him!

I am sure we could get it back one way or the other.
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 22 February 2007, 21:56:18
Quote
Quote
Quote
hummm thats a bugger Max....

I am coming home myself on Friday afternoon, its not much of a de-tour to go via Oxford.

If you can get your hands on a ridged tow bar, or even a rope. I can pop by in the Senny, and we can tow it to Brackley  :y
Thats a long way on a rope.... ...A34/M40 in rush hour (ie most of Friday afternoon/evening)

Not sure where Max.... but its a shame for his megga to miss out on Saturday. It was originally planned for him!

I am sure we could get it back one way or the other.
Hopefully he can borrow a rigid pole...
Title: Re: V6 Cambelt party - Brackley
Post by: tunnie on 22 February 2007, 22:01:39
Quote
Quote
Quote
Quote
hummm thats a bugger Max....

I am coming home myself on Friday afternoon, its not much of a de-tour to go via Oxford.

If you can get your hands on a ridged tow bar, or even a rope. I can pop by in the Senny, and we can tow it to Brackley  :y
Thats a long way on a rope.... ...A34/M40 in rush hour (ie most of Friday afternoon/evening)

Not sure where Max.... but its a shame for his megga to miss out on Saturday. It was originally planned for him!

I am sure we could get it back one way or the other.
Hopefully he can borrow a rigid pole...

Max, if you can get one. Drop me a PM....

I think myself and TheBoy are the closest to you... and if that micky mouse garage can't find the leak by tomorrow lunch time we can tow it to Brackley Friday evening..... in a propper RWD car.... a Senator   ;D ;D:y
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 22 February 2007, 22:04:01
Quote
we can tow it to Brackley Friday evening.....  .... a Senator
Is there enough rust holding the senator together enough to tow a heavy car?
Title: Re: V6 Cambelt party - Brackley
Post by: tunnie on 22 February 2007, 22:08:09
Quote
Quote
we can tow it to Brackley Friday evening.....  .... a Senator
Is there enough rust holding the senator together enough to tow a heavy car?

Oh ha HA!!  >:(

Just wait till its chipped & de-cat.... ;)
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 22 February 2007, 22:09:32
Quote
Just wait till its chipped & de-cat.... ;)
That will fix the rust?  :-?
Title: Re: V6 Cambelt party - Brackley
Post by: Timbuk on 22 February 2007, 22:14:59
Quote
Quote
Just wait till its chipped & de-cat.... ;)
That will fix the rust?  :-?

I think he meant chipped into little pieces at the scrap yard and de-catergorized as a motor vehicle :D
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 22 February 2007, 22:16:21
Quote
Quote
Quote
Just wait till its chipped & de-cat.... ;)
That will fix the rust?  :-?

I think he meant chipped into little pieces at the scrap yard and de-catergorized as a motor vehicle :D
;D  :y
Title: Re: V6 Cambelt party - Brackley
Post by: tunnie on 22 February 2007, 22:27:48
bastards!  >:(
Title: Re: V6 Cambelt party - Brackley
Post by: MaxV6 on 22 February 2007, 23:05:18
leav it out lads...

i LIKE sennies.

more than Omegas...

:D

especially more than  elite estates right now...  but seriously, I've driven more miles than the moon and back in Sennies.



I'll let you all know tomorrow as soon as there's any news.

Title: Re: V6 Cambelt party - Brackley
Post by: Kevin Wood on 22 February 2007, 23:38:51
If the worst comes to the worst and you need a lift I'm coming past Oxford on the A34 Saturday AM.

Hope you get it sorted though.

Kevin
Title: Re: V6 Cambelt party - Brackley
Post by: Elite Pete on 23 February 2007, 00:05:38
Just a thought but if its a 3.0 Elite it will be an Auto so you will have to unbolt the prop shaft before towing it any distance.
Title: Re: V6 Cambelt party - Brackley
Post by: MaxV6 on 23 February 2007, 02:08:01
Damn it i never even thought of that...... ( lack of practice....   )

I'm now contemplating fitting a swimming pool in the back, and hooking it up to the coolant system to make sure it has sufficient coolant to get to Brackley.

Sod it I'm going to bed., Editing is too much like hard work when your mind is elsewhere.

I've dropped Cornishtaz a line about the tow bar...

What are the limits on towing an auto actually??   would it need to be done in stages..?

Alternatively, If I fill a load of bottles....   maybe I could go the back way... and stop every 5 miles to fill up ....

the trouble is , if it gets worse, I'm screwed...

NOW i know why it was a dumb idea to let green flag lapse this year......


Max

Title: Re: V6 Cambelt party - Brackley
Post by: Admin on 23 February 2007, 08:24:48
How about driving steadily with the header tank cap off?

This will stop the system pressurising and may well make it easier to get it to Brackley.
Title: Re: V6 Cambelt party - Brackley
Post by: Marks DTM Calib on 23 February 2007, 08:28:50
You can tow an auto 50 miles at 50mph without problems.........

The old header tank trick works, leave the cap loose so it doesn't pressurise....and check the level regularly.
Title: Re: V6 Cambelt party - Brackley
Post by: cornishtaz on 23 February 2007, 08:34:58
This is an extract from the owners manual

with automatic transmission - place selector lever in "N". Vehicles with automatic transmission should not to be towed faster than 50mph or further than 60 miles. If the transmission is defective, or if this speed/distance is to be exceeded, the driveshaft must be disconnected from the rear axle.
Title: Re: V6 Cambelt party - Brackley
Post by: cornishtaz on 23 February 2007, 08:42:44
Looks like I can make this but wont be coming up till Saturday. Can I have some form of address/directions(I've got satnav). What time is the big event happening?

Is there anything else that is needed? I take your all ok for tools etc... what about food/drink(soft drink as I'm driving)
Title: Re: V6 Cambelt party - Brackley
Post by: x25xe on 23 February 2007, 08:59:07
Max V6

It seems a shame that you cannot get your Megga over to the event - especially so as it would appear that it was for you in the first place!!

However, I have a towing rod.  Although I am going to the V6 event, this is only for a diagnostic check and gearbox update and to meet those there.

I would be more than willing to tow you to the event with my tow rod and Transit (don't really want to tow with the Megga).

If you want to do this, then let me know and we can sort something out.

I am not too concerned about the diagnose and gearbox - I am sure that I can get this done some other time :)

Also, if you would rather disconnect the prop, then I will happily help you out here.  However, with the Transit, there is not much chance of getting over 55MPH!
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 23 February 2007, 09:00:38
Quote
Looks like I can make this but wont be coming up till Saturday. Can I have some form of address/directions(I've got satnav). What time is the big event happening?

Is there anything else that is needed? I take your all ok for tools etc... what about food/drink(soft drink as I'm driving)
I'll send PM with address.  If, however, you can get a lift with anyone, that would be appreciated, as parking will be tight...
Title: Re: V6 Cambelt party - Brackley
Post by: cornishtaz on 23 February 2007, 09:03:45
Quote
Quote
Looks like I can make this but wont be coming up till Saturday. Can I have some form of address/directions(I've got satnav). What time is the big event happening?

Is there anything else that is needed? I take your all ok for tools etc... what about food/drink(soft drink as I'm driving)
I'll send PM with address.  If, however, you can get a lift with anyone, that would be appreciated, as parking will be tight...


Cheers mate, I was coming really to say hello.

Anyone going up Saturday morn from Swindon/Oxford area
Title: Re: V6 Cambelt party - Brackley
Post by: theolodian on 23 February 2007, 09:04:47
I suggest you go with the header tank trick, and someone follows you with a tow bar.  The header tank trick should get you a fair distance if not all the way, and if it doesn't you'll still get there without feeling rushed.  If I had a hitch I'd come chaperone you today.  Just be careful about the motorway, you're not supposed to use it if you know the car won't make it and not sure what the towing rules are.
Title: Re: V6 Cambelt party - Brackley
Post by: Marks DTM Calib on 23 February 2007, 09:08:50
A towed car is considered to be a trailer....and trailers are quite legal on the motorway.
Title: Re: V6 Cambelt party - Brackley
Post by: cornishtaz on 23 February 2007, 09:11:35
As said above but must be on a solid bar no ropes allowed on the motorway
Title: Re: V6 Cambelt party - Brackley
Post by: x25xe on 23 February 2007, 09:12:06
Quote
I suggest you go with the header tank trick, and someone follows you with a tow bar.  The header tank trick should get you a fair distance if not all the way, and if it doesn't you'll still get there without feeling rushed.  If I had a hitch I'd come chaperone you today.  Just be careful about the motorway, you're not supposed to use it if you know the car won't make it and not sure what the towing rules are.

Good idea.  I could follow you with in my Megga with the tow rod if you like.
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 23 February 2007, 09:13:58
I imagine with a poorly car, MaxV6 would avoid motorway by coming up through Middleton Stoney/Ardley (or Bicester way), rather than risk M40...
Title: Re: V6 Cambelt party - Brackley
Post by: hotel21 on 23 February 2007, 09:34:32
Quote
A towed car is considered to be a trailer....and trailers are quite legal on the motorway.

Not strictly so.  Not wanting to be a pedant, but even on a rigid bar, the towed car needs a driver.  That driver must be licenced, insured, the car taxed and otherwise legal in all respects.  Only way out of this, is if the car is on a two wheel spec type dolly or a trailer and only then, does it become a trailer and insured etc by the towing vehicle.  

If its an A frame type towing device then the need for a driver is removed but the vehicle still needs to be taxed insured and tested as all 4 wheels remain running on the roadway.

Towropes on a motorway are a no-no......

Title: Re: V6 Cambelt party - Brackley
Post by: bob.dent on 23 February 2007, 10:57:49
I've been following this Brackley thread with interest and would have liked to have come over myself but unfortunately have other commitments on Saturday. Sounds like it's going to be like a mini Santa Pod. 8-)
Having just spent over £460.00 on getting my miggie sorted out it's a shame it didn't happen a few weeks earlier. :'(

Anyway guys, have a good'n and hope all goes well with getting cambelts done and Omega's fixed and no doubt a few Stella's will be had later. :y :y [smiley=beer.gif]
Title: Re: V6 Cambelt party - Brackley
Post by: MaxV6 on 23 February 2007, 11:06:44
Quote
I imagine with a poorly car, MaxV6 would avoid motorway by coming up through Middleton Stoney/Ardley (or Bicester way), rather than risk M40...

too damn right........  

guys you're all complete stars, the multiple offers of assistance are truly humbling....   as if i wasn't humbled enough already by Mark and Jaime's efforts, I must bow and doff my cap to you all....  a million thanks just for caring ....

I'm thinking that , assuming the garage doesn't fix it...  the best bet might be the cap off trick, back roads to Brackley with frequent stops, tonight , if Tunnie or anyone else  (Baz??  ) was willing to chaperone it... and give me a lift home again...  Obviously all fuel costs etc at my expense...
then the car is at jaime's first thing, nice and cool for strip down..... and I could either get a lift over , or come in the pug early on saturday,
along with my lad and the Animal protein for the BBQ.

if on the other hand, it's fixed, then hoorah....   and we can go back to plan A.

I'm truly sorry for all this kerfuffle chaps....  


Max
Title: Re: V6 Cambelt party - Brackley
Post by: cornishtaz on 23 February 2007, 11:41:58
Max I can give you a lift tomorrow morn, what time is best for you. I'm busy tonight so wouldn't be able to chaperone you
Title: Re: V6 Cambelt party - Brackley
Post by: Kevin Wood on 23 February 2007, 12:07:58
Quote
I'm thinking that , assuming the garage doesn't fix it...  the best bet might be the cap off trick, back roads to Brackley with frequent stops, tonight , if Tunnie or anyone else  (Baz??  ) was willing to chaperone it... and give me a lift home again...  Obviously all fuel costs etc at my expense...
then the car is at jaime's first thing, nice and cool for strip down..... and I could either get a lift over , or come in the pug early on saturday,  

You'll need a lift over on Saturday morning so you can drive back in the fixed Omega on Saturday night!

I could pick both yourself and cornishtaz up on the way through if parking's going to be tight.

Kevin
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 23 February 2007, 12:12:52
Quote
Quote
I'm thinking that , assuming the garage doesn't fix it...  the best bet might be the cap off trick, back roads to Brackley with frequent stops, tonight , if Tunnie or anyone else  (Baz??  ) was willing to chaperone it... and give me a lift home again...  Obviously all fuel costs etc at my expense...
then the car is at jaime's first thing, nice and cool for strip down..... and I could either get a lift over , or come in the pug early on saturday,  

You'll need a lift over on Saturday morning so you can drive back in the fixed Omega on Saturday night!

I could pick both yourself and cornishtaz up on the way through if parking's going to be tight.

Kevin
That would be ideal if you could all come together if required.  I live in a small cul-de-sac, and many of the residents are too lazy to park on their drives  >:( (most drives are single width, so many park one car on drive, and other on road)
Title: Re: V6 Cambelt party - Brackley
Post by: Ronald_McBurger on 23 February 2007, 12:14:49
As mentioned, I cannot make it this time. So I can help in other ways....

Laidback is bringing my jack and stands in case they are needed and I am donating a new box of latex gloves so you guys can keep a bit cleaner. Not much, but Tescos.(Every little helps....!)
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 23 February 2007, 12:16:36
Quote
As mentioned, I cannot make it this time. So I can help in other ways....

Laidback is bringing my jack and stands in case they are needed and I am donating a new box of latex gloves so you guys can keep a bit cleaner. Not much, but Tescos.(Every little helps....!)
Cheers Ronnie McB :y

If you saw the state of my jack.... ;)
Title: Re: V6 Cambelt party - Brackley
Post by: Ronald_McBurger on 23 February 2007, 12:19:21
JEEEEEEEZ!!!!! Just seen your post count Jaime. You have to get out more mate. This has got a bit serious! ;D
Title: Re: V6 Cambelt party - Brackley
Post by: x25xe on 23 February 2007, 12:44:41
Quote
If you saw the state of my jack.... ;)

Along with mine!!
Title: Re: V6 Cambelt party - Brackley
Post by: MaxV6 on 23 February 2007, 13:07:11
Right ho

Just been over the road , kind of explained this situation, and they're gonna pop it all back together and drop it off in a bit...  no charge...

the gaffer says , No fix , no fee, and we'd rather you were a happy camper .....  even if we didn't wave magic wands...  they're happy as long as i'm happy kinda thing.

So I'll load it up with useful bits ( I too have a jack and axle stands .in decent nick..) and we'll see about getting it over there tonight .

the embarrassing thing will be that i haven;t been able to take it to the car wash.... so it's only nominally "black" by nature....  most of it's "brown"

Title: Re: V6 Cambelt party - Brackley
Post by: Taxi_Driver on 23 February 2007, 13:19:21
Quote
Quote
Quote
Looks like I can make this but wont be coming up till Saturday. Can I have some form of address/directions(I've got satnav). What time is the big event happening?

Is there anything else that is needed? I take your all ok for tools etc... what about food/drink(soft drink as I'm driving)
I'll send PM with address.  If, however, you can get a lift with anyone, that would be appreciated, as parking will be tight...


Cheers mate, I was coming really to say hello.

Anyone going up Saturday morn from Swindon/Oxford area

I will be going about middayish, gladly give anyone a lift on the way  :y
PM me if you need a lift.  :y
Title: Re: V6 Cambelt party - Brackley
Post by: MaxV6 on 23 February 2007, 14:14:55
Okay, Tunnie and Super-sennie to the rescue.

:D

We'll move my meega tonight....  

Kev  , I'd be very grateful for that Lift Saturday morning mate....

a PM coming shortly with address ....

let me know what time to be ready....

Baz...(Cornishtaz)   what say you come here to be picked up by Kev, and I'll bring you back at the end of the night...  
you could even leave the car at home if you wanna get here by Public transport, I'll happily drop you back in Carterton...   thus meaning you could have a beer or two..


Max
Title: Re: V6 Cambelt party - Brackley
Post by: Marks DTM Calib on 23 February 2007, 14:32:48
Quote
I will be going about middayish, gladly give anyone a lift on the way  :y
PM me if you need a lift.  :y

Just make sure he has the meter running....you know what these Taxi drivers can be like ;)
Title: Re: V6 Cambelt party - Brackley
Post by: sir moanalot on 23 February 2007, 17:24:24
ive tried everything, one guy's missus is ready to pop one out (i even offered him a tenner) but he'd only accept £20 (joke).
another is away on a holiday, and another cant be arsed. so cannot pop down, sat nav said 2.28 hrs 99.8 miles (usually what i do in a days work) so next time will book a days hol well in advance!! have a good time and think of me when you all have your feast and (only) one pint of booze! :'(
Title: Re: V6 Cambelt party - Brackley
Post by: Bo Bo on 23 February 2007, 17:39:18
Quote
and (only) one pint of booze! :'(
OK, I'll make it a pint of whisky  ::)

Sorry you can't make it.
Title: Re: V6 Cambelt party - Brackley
Post by: Taxi_Driver on 23 February 2007, 18:33:50
Quote
Quote
I will be going about middayish, gladly give anyone a lift on the way  :y
PM me if you need a lift.  :y

Just make sure he has the meter running....you know what these Taxi drivers can be like ;)

Well i wasnt going to turn it on......but as you suggested it....  ;)

Are you sorted with a lift CornishTaz?
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 23 February 2007, 18:34:51
Quote
ive tried everything, one guy's missus is ready to pop one out (i even offered him a tenner) but he'd only accept £20 (joke).
another is away on a holiday, and another cant be arsed. so cannot pop down, sat nav said 2.28 hrs 99.8 miles (usually what i do in a days work) so next time will book a days hol well in advance!! have a good time and think of me when you all have your feast and (only) one pint of booze! :'(
Yeah, shame you can't make it.  Sorry we didn't give much warning, but it was all arranged (both events) in a hurry...
Title: Re: V6 Cambelt party - Brackley
Post by: sir moanalot on 23 February 2007, 18:52:57
no worries, any other weekend bar this weekend !!   ::) i always seem to be on call when something is going on >:(
Title: Re: V6 Cambelt party - Brackley
Post by: MaxV6 on 23 February 2007, 19:24:32
Quote

Are you sorted with a lift CornishTaz?



current plan is for Cornishtaz to get to mine before 9 , and go from there, but , as usual, things may change , I'm sure he'll let you know if there's a problem and he needs a lift.

Given the traffic issues right now, with the M40 and A34 being solidly blocked ALONG with ALL the usual back routes around that....  i suspect we may move the meega an hour or so later than originally planned.....  
Title: Re: V6 Cambelt party - Brackley
Post by: cornishtaz on 23 February 2007, 22:22:53
Yes Max I'll be with you around 9ish depending on traffic
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 23 February 2007, 23:06:17
OK, MaxV6's car has made it here, defo losing coolant!
Title: Re: V6 Cambelt party - Brackley
Post by: jonny2112 on 23 February 2007, 23:53:29
Hope you all have a great day - enjoyable and productive  :y

I might be heading over to the mainland about April time, to the Manchester area, so if there are any more parties planned I might be able to make an appearance and join in the craic!

Good luck for tomorrow
Title: Re: V6 Cambelt party - Brackley
Post by: MaxV6 on 24 February 2007, 00:23:50
Quote
OK, MaxV6's car has made it here, defo losing coolant!


and there was me thinking i was paranoid .....  imagining the cloud of steam....   :y


Good to meet you Jaime, many thanks.....   See you in the morning....  


Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 24 February 2007, 08:58:49
Webcam....

http://images.omegaowners.com/images/events/cambeltparty/

Title: Re: V6 Cambelt party - Brackley
Post by: Jimbob on 24 February 2007, 09:12:55
Webcam doesnt want to start from firefox, fine in IE though
Title: Re: V6 Cambelt party - Brackley
Post by: Auto Addict on 24 February 2007, 09:18:51
Brill :y
Title: Re: V6 Cambelt party - Brackley
Post by: hotel21 on 24 February 2007, 09:24:50
Well done, peeps!!    :y

Not wanting to be wide, but is there sound?  I have the various volume buttons up but not a cheep?  No prob if theres not, just curious....
Title: Re: V6 Cambelt party - Brackley
Post by: Auto Addict on 24 February 2007, 09:30:29
Don't think there's any sound, a lot of people standing around with their hands in their pockets though ;D
Title: Re: V6 Cambelt party - Brackley
Post by: Auto Addict on 24 February 2007, 09:31:46
Looks like Marks_DTM is doing all the work (as usual) :)
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 24 February 2007, 09:32:59
Sound disabled due to bad language... ::)
Title: Re: V6 Cambelt party - Brackley
Post by: Auto Addict on 24 February 2007, 09:34:24
Are you going to show the BBQ later?
Title: Re: V6 Cambelt party - Brackley
Post by: hotel21 on 24 February 2007, 09:35:45
Bad language?  Surely just the common words of a keen Omega spanner twirler!!   ;D

We know what the words mean, so no probs here with sound...!
Title: Re: V6 Cambelt party - Brackley
Post by: Omegatoy on 24 February 2007, 09:39:28
Blimey just had a quick peep and some nutter was hitting the cambelt wiv a big hammer!!!!! ;D
Title: Re: V6 Cambelt party - Brackley
Post by: JohnM on 24 February 2007, 12:39:27
Can't seem to get a feed - someone tripped over it?

I bet its unplugged so the com port can update someones gearbox   :(
Title: Re: V6 Cambelt party - Brackley
Post by: JohnM on 24 February 2007, 12:44:19
Thanks, that's better.
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 24 February 2007, 12:45:19
sorry, it all got wet...  ...all dried out now, should be ok now....
Title: Re: V6 Cambelt party - Brackley
Post by: JohnM on 24 February 2007, 12:48:02
Quote
sorry, it all got wet...  ...all dried out now, should be ok now....
Is it raining there ?

(Grey but dry so far here)
Title: Re: V6 Cambelt party - Brackley
Post by: Ken T on 24 February 2007, 13:11:46
Managed to get the feed working in Opera, but I had to Cut n paste the mms://81.155.121.110:8080/stream.wmv into the address bar, then it worked. Its a bit difficult to tell who's who, can you get them to wear name tags, so we can see who's doing what ;D ;D That chap in the yellow is obviously doing a main supporting job  ;D ;D
Title: Re: V6 Cambelt party - Brackley
Post by: nixoro on 24 February 2007, 13:21:19
Quote
Managed to get the feed working in Opera, but I had to Cut n paste the mms://81.155.121.110:8080/stream.wmv into the address bar, then it worked. Its a bit difficult to tell who's who, can you get them to wear name tags, so we can see who's doing what ;D ;D That chap in the yellow is obviously doing a main supporting job  ;D ;D

Works where I am, albeit small in media player though still good :y
Title: Re: V6 Cambelt party - Brackley
Post by: Ken T on 24 February 2007, 13:33:26
Do you think we could get them to move the camera down about 2ft, so we are looking diagonally into the engine bay?. The main item in the pic is a chap at the nearside of the car
Title: Re: V6 Cambelt party - Brackley
Post by: nixoro on 24 February 2007, 13:47:01
Quote
Do you think we could get them to move the camera down about 2ft, so we are looking diagonally into the engine bay?. The main item in the pic is a chap at the nearside of the car

Would be good if they could  ;D all you can see at the moment is someones back to the camera

Wonder who it is wearing the england jacket   ;D
Title: Re: V6 Cambelt party - Brackley
Post by: Ken T on 24 February 2007, 14:14:59
Its a shame they couldn't fit the Web cam to someone's head, so we could see what they were looking at ;D ;D on second thoughts maybe not ;D ;D ;D
Title: Re: V6 Cambelt party - Brackley
Post by: Markjay on 24 February 2007, 15:58:22
Quote
Managed to get the feed working in Opera, but I had to Cut n paste the mms://81.155.121.110:8080/stream.wmv into the address bar, then it worked. Its a bit difficult to tell who's who, can you get them to wear name tags, so we can see who's doing what ;D ;D That chap in the yellow is obviously doing a main supporting job  ;D ;D


mms feed blocked by the corporate firewall  >:(

Did I mention I was working today ?  :'(

Hope all is well with the party though!  :y
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 24 February 2007, 17:19:06
had a bit of rain earlier, dry now....
Title: Re: V6 Cambelt party - Brackley
Post by: Martin_1962 on 24 February 2007, 17:25:01
Someone barbequing now!
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 24 February 2007, 19:42:13
Quote
Someone barbequing now!
bbq and  [smiley=beer.gif]
Title: Re: V6 Cambelt party - Brackley
Post by: Martin_1962 on 24 February 2007, 20:00:02
BBQ Cider and watched the whitewash.

Found out I am out of nice burgers and had to have the boys cheepo ones squirted fat everywhere
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 25 February 2007, 01:25:32
I think tunnie wishes to come out of the closet....

(http://images.omegaowners.com/images/theboy/cambeltpartyfeb07/IMG_1789.JPG)

;)
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 25 February 2007, 03:19:32
Well, across the 2 events, we have done 7 cambelts, 2 sets of rocker gaskets, an oil cooler plate, various simple little tasks etc.

A good number of people made it today, and have been well fed (thanks Max/Mick) and watered. Some of us have probably drunk to much, me included, but I think and hope everyone had an enjoyable day.

An awful lot was acheived today, and I suspect there will be some aches and pains tomorrow, but it was worth it imho.

Unfortunately, MaxV6's car wasn't quite so successful, which was a real shame, but I think we are a step closer to locating that bloody leak...

Theolodian did discover why his headlight was pointing low, and I will bet a pound that he doesn't free that motor off ;)

All-in-all, a bloody good day.
Title: Re: V6 Cambelt party - Brackley
Post by: Ronald_McBurger on 25 February 2007, 07:44:59
Fantastic guys! Just wish I could have joined in. The first cambelt part was great, but this sounds like it was even better. How much have VX lost out on yesterday at their silly prices? £3000? more?

Congratulations to all of you.

Pics please.........
Title: Re: V6 Cambelt party - Brackley
Post by: theolodian on 25 February 2007, 08:38:59
Quote
Well, across the 2 events, we have done 7 cambelts, 2 sets of rocker gaskets, an oil cooler plate, various simple little tasks etc.

A good number of people made it today, and have been well fed (thanks Max/Mick) and watered. Some of us have probably drunk to much, me included, but I think and hope everyone had an enjoyable day.

An awful lot was acheived today, and I suspect there will be some aches and pains tomorrow, but it was worth it imho.

Unfortunately, MaxV6's car wasn't quite so successful, which was a real shame, but I think we are a step closer to locating that bloody leak...

Theolodian did discover why his headlight was pointing low, and I will bet a pound that he doesn't free that motor off ;)

All-in-all, a bloody good day.
That block of rust, er motor, was on the table by the BBQ last I saw it . . .

Yeah, bloody good day for sure.  Lots of work done, Mick took care of us in the morning, then Max showed that he's equal behind a grill to MarkDTM under a bonnet!  Stellar Mega Meega BBQ!

I hope Max's car can get sorted soon.  A lot of people left very happy.  I was one of the ones getting a few random bits done, like;  HID, temp sensor reconnected, g/b update, and MarkDTM tightened up my steering box.  Added up to a big difference on the way home!  Also learned more about what else I need to fix.  :'( I'm already hoping we can do another somewhere on March 24th.  :y

Who pulled over on the side of the road just outside Brackley around 10pm?  I was the car behind you.  Thanks for leading me out of TB's estate, I had been lost in there for at least 10 minutes!
Title: Re: V6 Cambelt party - Brackley
Post by: Marks DTM Calib on 25 February 2007, 08:49:51
I am very tired and sore.....12 hours non stop was a bit much.

Gutted that we didn't Fix MaxV6's coolent leak....it must be the stat bridge pipe or seal I think....it also needs a handbrake cable as the drivers side one is seized...
Title: Re: V6 Cambelt party - Brackley
Post by: Markie on 25 February 2007, 08:59:32
Good Job well done Guys  :y
Title: Re: V6 Cambelt party - Brackley
Post by: JamesV6CDX on 25 February 2007, 09:04:21
Quote
I am very tired and sore.....12 hours non stop was a bit much.

Gutted that we didn't Fix MaxV6's coolent leak....it must be the stat bridge pipe or seal I think....it also needs a handbrake cable as the drivers side one is seized...

Agreed Mark, I did aboout 12 hours changing belts, v6 cam covers etc.. I was sore last night, but surpsisingly OK this morning.

It was well worth it, we achieved a lot.

Max's coolant leak..  I'm going up when we can agree a time.. to look at the stat and coolant transfer pipe.. hopefully we will have a happy ending on that one..


Title: Re: V6 Cambelt party - Brackley
Post by: sir moanalot on 25 February 2007, 09:18:44
 green with envy and bloody gutted, i got 2 sodding call outs yesterday both 2nd line electrician jobs waste of time! :'(
Title: Re: V6 Cambelt party - Brackley
Post by: theolodian on 25 February 2007, 09:25:48
Quote
Quote
I am very tired and sore.....12 hours non stop was a bit much.

Gutted that we didn't Fix MaxV6's coolent leak....it must be the stat bridge pipe or seal I think....it also needs a handbrake cable as the drivers side one is seized...

Agreed Mark, I did aboout 12 hours changing belts, v6 cam covers etc.. I was sore last night, but surpsisingly OK this morning.

It was well worth it, we achieved a lot.

Max's coolant leak..  I'm going up when we can agree a time.. to look at the stat and coolant transfer pipe.. hopefully we will have a happy ending on that one..


You guys really stuck at it, along with TB, LB, Sounds2K, Timbuk, and a whole bunch of others!  I was relatively faffing about and I'm sore despite Ibuprofen!
Title: Re: V6 Cambelt party - Brackley
Post by: Auto Addict on 25 February 2007, 10:03:53
Quote
I am very tired and sore.....12 hours non stop was a bit much.

Gutted that we didn't Fix MaxV6's coolent leak....it must be the stat bridge pipe or seal I think....it also needs a handbrake cable as the drivers side one is seized...

Plus the 4/5 hours you spent on my car on Friday evening, I bet you are a bit tired.

Top guy Mark :y
Title: Re: V6 Cambelt party - Brackley
Post by: Auto Addict on 25 February 2007, 10:04:36
Quote
Quote
I am very tired and sore.....12 hours non stop was a bit much.

Gutted that we didn't Fix MaxV6's coolent leak....it must be the stat bridge pipe or seal I think....it also needs a handbrake cable as the drivers side one is seized...

Plus the 4/5 hours you spent on my car on Friday evening, I bet you are a bit tired.

Top guy Mark :y

Even though you don't know how to jack up a 2.2 ;D
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 25 February 2007, 13:57:51
Quote
Top guy Mark :y
Agreed, people who give up their day, put themselves out, drive a considerable distance to help out others without wanting anything in return, are very special people in my book.

So a huge thanks to those experts who turned up just to help out - Marks_DTM, Laidback, and JamesV6CDX - they were the guys that made it happen. Top guys indeed.
Title: Re: V6 Cambelt party - Brackley
Post by: cornishtaz on 25 February 2007, 14:05:26
Was great to put some faces to names and I learn't a few things on the way. Your all a top bunch of guys and hopefully I'll bring my car along.

Didn't get in till 1.45am(missus not impressed), had an autobox prob but will start new thread


Once again thanks to all involved  :y :y
Title: Re: V6 Cambelt party - Brackley
Post by: Timbuk on 25 February 2007, 14:52:19
Thanks to Elite Pete for the lift ;), only went to say hello, meet a few more faces, take some pics, eat the food and get drunk :D but it wasn't long before i was getting my hands dirty ( couldn't resist ), enjoyed helping out where i could and learning more from the maestro's, had a great day, cheers guys [smiley=beer.gif] although that bloody Hotel was SH*T >:(
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 25 February 2007, 14:58:29
Yes, despite what the local tourist information had told me, the Crown Hotel in Brackley would appear to be a sh!thole.  Personally, every time I've been in there, I've never made it past the first door on the left ::)
Title: Re: V6 Cambelt party - Brackley
Post by: MaxV6 on 25 February 2007, 15:01:49
Quote
Quote
Top guy Mark :y
Agreed, people who give up their day, put themselves out, drive a considerable distance to help out others without wanting anything in return, are very special people in my book.

So a huge thanks to those experts who turned up just to help out - Marks_DTM, Laidback, and JamesV6CDX - they were the guys that made it happen. Top guys indeed.

seconded, thirded, and sixteen-billionth'ed

Despite my Car's obstinate intransigence, a million thanks again and again to all concerned.,...


it exhibited more weird behaviour on the way home as well, but it did GET home....  without masses of additional coolant....

The header tank , and much of the off side pipe work, like that to the throttle body is staying almost stone cold..  de-pressurising and squidging the passenger side top hose to move coolant seemed to make a difference.. ... we (kev baz and I) theorised it's probably an air lock somewhere... possibly relating to James's theory about the transfer hose and thermostat.

the temperature gauge gets to about 94 whilst driving (Cap on this time!) but starts to drift upwards if it spends any time stationary...and isn't keen on coming back down quickly...

While reading sat nav manual this afternoon, i found an additional service history  sheet, that makes it more unlikely to be the heads, one would hope. .. as it had new heads at 60K due to cambelt failure. then another cambelt (but no tensioner) at 82,000)
the "real" mileage now is about 110K (the instrument cluster in there is a temporary ebay replacement as the control board failed on the original , it hasn't really done 175K)

Once again, a bazillion thanks to all....   hope no one got food poisoning ;)


I'll start a new thread about all that once I've been able to more carefully observe and document it's behaviour.

Jaime, I did leave a load of stuff at your place mate....  if it's okay I'll get it during the week.....  My legs are too damn sore to do the clutch in the 106 today...  Hopefully we didn't wreck the place too much.... and Mrs TB isn't too hard on you....  hope the Spine improves rapidly mate.  A standing ovation for hosting such an event at your place, One hope the neighbours eventually forgive you....   and thanks for whacking the wipers back on mate ;)


Dave (LB66) i have a nagging feeling I owe you for the brake shoes as well as the water pump. Pm me the details . I'll get those Sennheisers off to you ASAP along with any balance I owe you.,  A million thanks for your tireless efforts on everyone's behlaf,... but especially mine.

Mark, what can I say, mere words cannot express the debt of gratitude we all, but especially myself, owe you...   Next time we're going to have to lay on a swedish masseuse and limo transport .

Tunnie, you deserve at least as much credit as the admin team...    donating space and Mother tunnie's catering, and your invaluable assistance the night before ....

and also, on behalf of everyone, JamesV6CDX....   a complete star


in fact everyone there went above and beyond the call of duty ,  never have i really seen such a collective spirit of camaraderie and genuine desire to contribute to the well being of others . Thank you all, and I hope to see you all again.

I will be hosting an event here at my place in a month or two....  expect an even bigger , more organised and balanced  BBQ :D

Best regards , and many many thanks to all .

Max
Title: Re: V6 Cambelt party - Brackley
Post by: Timbuk on 25 February 2007, 15:03:49
Quote
Yes, despite what the local tourist information had told me, the Crown Hotel in Brackley would appear to be a sh!thole.  Personally, every time I've been in there, I've never made it past the first door on the left ::)


That'll be the bar then ::)
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 25 February 2007, 15:09:35
Yes, Max, I appear to have gained a think grill plate thing, which I have washed with a sponge, but still got stuck bits on.  Looks non stick so don't want to use anything too harsh.

Also got some bbq bits in a green bag, and a knife I don't reconise (though, tbh, I wouldn't have a clue which kitchen implements are ours anyway  :-[)

Max, many thanks again for your bbq skills, it looked, and tasted good :y.  I was a little too busy to fully appreciate, as the work ran on much later than planned.  I feel rough as hell today, but I don't think that was your cooking ;D

Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 25 February 2007, 15:10:16
Quote
Quote
Yes, despite what the local tourist information had told me, the Crown Hotel in Brackley would appear to be a sh!thole.  Personally, every time I've been in there, I've never made it past the first door on the left ::)


That'll be the bar then ::)
yup
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 25 February 2007, 16:17:27
I haven't really had a good search yet, but I appear to have gained a couple of bits - I'll post up some photos later ready for claiming ;)

Myself, I appear to have lost E11/E12/E20 3/8" drive torx sockets and a 10mm/12mm rachet spanner, all 'Halfords' - has any one gained these......
Title: Re: V6 Cambelt party - Brackley
Post by: MaxV6 on 25 February 2007, 16:27:54
I find myself equipped with a rubber mallet I never had before....

Left Behind, to my knowledge..

 Large Griddle plate (don;t worry about trying to clean too much Jaime, I'll deal with it )
Mikey's favourite Hot pepper sauce, organic Honey and Dijon mustard and a few other similar odds and sods.
a number of BBQ implements, Sausage turning trays, fish turners and such like
small Chefs preparation knife.
Clips for Meega's rain scuttle
med-large anti-bac Chopping board
Spare V6 Radiator.


and apparently My legs....   coz these ones i have feel like they belong to someone else....

 :o


It might be convenient for me to pop by on either Monday , Wedneday or Thursday day time this coming week....   in Pugsey.... or any evening barring wednesday

Max


Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 25 February 2007, 16:29:53
Quote
I find myself equipped with a rubber mallet I never had before....

Left Behind, to my knowledge..

 Large Griddle plate (don;t worry about trying to clean too much Jaime, I'll deal with it )
Mikey's favourite Hot pepper sauce, organic Honey and Dijon mustard and a few other similar odds and sods.
a number of BBQ implements, Sausage turning trays, fish turners and such like
small Chefs preparation knife.
Clips for Meega's rain scuttle
med-large anti-bac Chopping board
Spare V6 Radiator.


and apparently My legs....   coz these ones i have feel like they belong to someone else....

 :o


It might be convenient for me to pop by on either Monday , Wedneday or Thursday day time this coming week....   in Pugsey.... or any evening barring wednesday

Max


I ain't going in to work tomorrow, so will be here all day.....
Title: Re: V6 Cambelt party - Brackley
Post by: Timbuk on 25 February 2007, 16:33:20
Quote
I haven't really had a good search yet, but I appear to have gained a couple of bits - I'll post up some photos later ready for claiming ;)

Myself, I appear to have lost E11/E12/E20 3/8" drive torx sockets and a 10mm/12mm rachet spanner, all 'Halfords' - has any one gained these......


Thats not good :( sure they will turn up ;)
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 25 February 2007, 16:40:31
Quote
Quote
I haven't really had a good search yet, but I appear to have gained a couple of bits - I'll post up some photos later ready for claiming ;)

Myself, I appear to have lost E11/E12/E20 3/8" drive torx sockets and a 10mm/12mm rachet spanner, all 'Halfords' - has any one gained these......


Thats not good :( sure they will turn up ;)
I'm sure that they are either on the garage floor - I ain't even thought about tidying the garage up yet - or through in someone's toolbox mistakeningly.  I hope they haven't been left in engines  :o
Title: Re: V6 Cambelt party - Brackley
Post by: MaxV6 on 25 February 2007, 16:47:45
Oh.... and the memory issue is resolved...

according to the schedule, that AMAZING cake (someone post a picture, Mine's too shaky) was delivered by Mambafia (andy?)

Damn but it was a brilliant move.... a specialised , personalised,  "Happy Cambelt party" cake from Asda....

Top marks for initiative and humour.

Title: Re: V6 Cambelt party - Brackley
Post by: Marks DTM Calib on 25 February 2007, 17:18:56
I have found a Halfords E10.....and I am missing a Draper Pro E12....and a few screw drivers...

The wife isn't speaking to me either.....so that a plus point!

Title: Re: V6 Cambelt party - Brackley
Post by: sounds2k on 25 February 2007, 17:23:55
Max - yep your radiator is in TheBoy's garage, we saw it there today ... top BBQ skills too  :y

thanks to everyone who turned up, it was a good day all in all and funny watching James heading for the kitchen on his sea legs  ;)

Nice to put faces to names, roll on the next one  :)
Title: Re: V6 Cambelt party - Brackley
Post by: Kevin Wood on 25 February 2007, 17:38:23
I'd like to echo the thanks to all involved, especially TheBoy for letting us trash his house and MaxV6 for the excellent food.

It was really good to meet you all although it'll take a few more rounds before I can reliably put names to all the faces, I'm sure.

The wife's not talking to me either after I rolled in at 2AM. :o

Quote
small Chefs preparation knife

So, about a 13" blade, then? ;-)

Sorry I left you at the A34, MaxV6. I hit a load of standing water on the slip road prompting a traction control light at 70, then hit a red light behind you. I wasn't sure of the way from then on and by the way you were going I assumed you weren't in trouble so I got back on the A34.

Thanks again to all and looking forward to the next time.

Kev
Title: Re: V6 Cambelt party - Brackley
Post by: MikeDundee on 25 February 2007, 18:11:48
Yes I also have to put my tuppence worth in and Thank Jaime for putting me and my daughter up last night, TOP MAN :y....Elite Pete for sorting out my dash (almost), but now I know how to do that job, Thanks to Pete :y. And a big Thank you to Max for the BBQ yesterday, and the spare dash today, which I have just completed trashing to bits (only joking), Oh and for lending me the BRATZ DVD, would've preferred the Fimbles though ;D. Thanks to Dan (sounds2k) for the malt whisky last night/this morning :o....Thanks to Doug (Timbuk) for the Indian take away burgers this last night/this morning :y ;D........

Great day good to put faces to names and just to add what a great bunch of guys for what they all done yesterday for all the other Forum members yesterday TOP MEN :y

And last but not least I have now managed to remove the dials succesfully from the dash, put the chrome surrounds in, and just need to put the white dials into my own dash, swap over the dash housing unit from Max's to mine. Have took some pics of how to do, will post a thread with pics later. :y  
Title: Re: V6 Cambelt party - Brackley
Post by: theolodian on 25 February 2007, 18:28:54
Quote
I will be hosting an event here at my place in a month or two....  expect an even bigger , more organised and balanced  BBQ :D

Max
I've put up a post in the meetings forum if you're interested.

Keep us posted on your coolant leak.  I might be able to do something this week (during the day) if you get stuck.
Title: Re: V6 Cambelt party - Brackley
Post by: STMO123 on 25 February 2007, 18:46:27
You guys make me feel ashamed for being so lezy :-[


But I am very old ;)
Title: Re: V6 Cambelt party - Brackley
Post by: cornishtaz on 25 February 2007, 18:52:34
Mikedundee glad to hear you got the dash sorted I'm sitting with antisipation for the pics and how to thread before I start doing mine
Title: Re: V6 Cambelt party - Brackley
Post by: MikeDundee on 25 February 2007, 18:59:19
Quote
Mikedundee glad to hear you got the dash sorted I'm sitting with antisipation for the pics and how to thread before I start doing mine

Yeah so am I, pretty easy just have to take care, its looking good, just got to fit it on mine now, may just do it tomorrow afternoon. :y  
Title: Re: V6 Cambelt party - Brackley
Post by: MaxV6 on 25 February 2007, 20:12:59
Quote
Sorry I left you at the A34, MaxV6. I hit a load of standing water on the slip road prompting a traction control light at 70, then hit a red light behind you. I wasn't sure of the way from then on and by the way you were going I assumed you weren't in trouble so I got back on the A34.

Thanks again to all and looking forward to the next time.

Kev

Many thanks for the Escort Kev...   I meant to dig out your Mobile No and check you were Okay, but got sidetracked into bed.,...

Good to hear you made it home in one piece....


Best regards
Max
Title: Re: V6 Cambelt party - Brackley
Post by: MaxV6 on 25 February 2007, 20:18:54
Quote
And a big Thank you to Max for the BBQ yesterday, and the spare dash today, which I have just completed trashing to bits (only joking), Oh and for lending me the BRATZ DVD, would've preferred the Fimbles though ;D.  


No worries mike, you forgot your Tesco cooler bag , and any of it's contents mate.....

now you'll HAVE to bring the lass over for dinner & more bratz exposure...  one day....   scarily, i recall the kids actually  having a fimbles video somewhere.....  

look forward to seeing the dash in all it's glory

 ;D :y

Max
Title: Re: V6 Cambelt party - Brackley
Post by: Marks DTM Calib on 25 February 2007, 21:10:55
And thanks to MaxV6's lad for doing a top job on the throttle and breather cleaning plus bringing the tea out....
Title: Re: V6 Cambelt party - Brackley
Post by: Timbuk on 25 February 2007, 21:13:11
Quote
And thanks to MaxV6's lad for doing a top job on the throttle and breather cleaning plus bringing the tea out....

Yup :y
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 25 February 2007, 21:21:10
I know he probably won't see this, but I should really thank my immediate neighbour who I share the drive with.  He didn't mind us spread all over his drive, antifreeze flowing down it (mind you, he must be used to that by now ;)), and provided significant additional parking later in the day.  And he said for the next one I host (!) just let him know so he can do the same again...
Title: Re: V6 Cambelt party - Brackley
Post by: Timbuk on 25 February 2007, 21:23:51
Well done to everybody who were working in the background, all that tea kept coming out and Max and co spent god knows how many hours on that BBQ :y

Poor old Max, after all that work done to his car, finally got away very late, twenty minutes later he returned as it had started raining, turned on the wipers to find they were missing ::), had to come back to get them. :o Sorry Max but we did have to laugh when Jaime told us ;D
Title: Re: V6 Cambelt party - Brackley
Post by: MaxV6 on 25 February 2007, 21:26:35
Jaime, with regard to the neighbours from paradise, Might I suggest a nice bottle of something as a thank you??

In our old house, when we hosted the Large (100-200 guests)  audio industry summer BBQ's, we used to give each of the neighbours a bottle or two of decent wine as a thank you......  even though they were invited, given that we tended to party till 4 am , it seemed like the decent thing to do....

given the volunteered  use of the rugger club car park as well as drive way etc, i reckon they deserve it.

Title: Re: V6 Cambelt party - Brackley
Post by: Elite Pete on 25 February 2007, 21:43:08
Quote
I know he probably won't see this, but I should really thank my immediate neighbour who I share the drive with.  He didn't mind us spread all over his drive, antifreeze flowing down it (mind you, he must be used to that by now ;)), and provided significant additional parking later in the day.  And he said for the next one I host (!) just let him know so he can do the same again...

If you like I would'nt mind going round and thanking your next door neighbours wife personally on behalf of the OOF ;) ;D.

I would like to thank everyone involved yesterday for making it not only a productive day but a good laugh as well and lets hope the next meet is quite soon.

Cheers Fellas :y
Title: Re: V6 Cambelt party - Brackley
Post by: Timbuk on 25 February 2007, 21:45:31
Quote
If you like I would'nt mind going round and thanking your next door neighbours wife personally on behalf of the OOF ;) ;D.


What do you mean EP ::)
Title: Re: V6 Cambelt party - Brackley
Post by: Elite Pete on 25 February 2007, 21:47:19
Quote
Quote
If you like I would'nt mind going round and thanking your next door neighbours wife personally on behalf of the OOF ;) ;D.


What do you mean EP ::)

She was a BABE :P
Title: Re: V6 Cambelt party - Brackley
Post by: MikeDundee on 25 February 2007, 21:48:48
Quote
Quote
If you like I would'nt mind going round and thanking your next door neighbours wife personally on behalf of the OOF ;) ;D.


What do you mean EP ::)

You missed it yesterday Timbuk, why do u think it took EP so long to fit the dash in my car ;) ;D
Title: Re: V6 Cambelt party - Brackley
Post by: AndersH on 26 February 2007, 09:10:48
Quote
Oh.... and the memory issue is resolved...

according to the schedule, that AMAZING cake (someone post a picture, Mine's too shaky) was delivered by Mambafia (andy?)

Damn but it was a brilliant move.... a specialised , personalised,  "Happy Cambelt party" cake from Asda....

Top marks for initiative and humour.

Thanks Max, I was impressed at how well it came out - I think everyone was far too stuffed to eat cake after all the meat - nice one on the bbq!
Can I also thoroughly thank everyone who worked on my car and did an absolutely grand job, it's running really well and I'm sure it will be even better once I've done the breathers which now I have the confidence to do after seeing so much hot Omega engine action over the course of the day  ;D
Really wish I could have stayed longer but had to work on the Sunday and I live 2 hours away. But to everyone, thanks again, was a really good day.
Title: Re: V6 Cambelt party - Brackley
Post by: Bo Bo on 26 February 2007, 09:30:28
I'd also like to add a few thanks.

TheBoy for letting us use his place.
mikedundee & nixoro for going out of their way to get a spare alloy to me.
MaxV6 et al for sustenance.
& last but certainly not least to sounds2k for all the work you did on my car, I can’t thank you enough, top bloke, cheers  :y :y

Apologies if I've forgot anyone.
Title: Re: V6 Cambelt party - Brackley
Post by: Marks DTM Calib on 26 February 2007, 10:31:27
Quote
Max's coolant leak..  I'm going up when we can agree a time.. to look at the stat and coolant transfer pipe.. hopefully we will have a happy ending on that one..

Make sure you have a new stat, and stat bridge pipe plus bridge pipe to rad hose...plus associated seals....if its the latest design of stat it needs slightly longer bolts and the stat bolts need sealent as they go into a water jacket...

I have a feeling that either the hose is buggered or, more likely, the bridge pipe is buggered....(these are about 8 quid new with seals).........I suspect this following a little snippit I picked up from Max when we fired it up last thing at night ' the heads were changed around 60K miles'...its easy to damage when removing it and then its just a matter of time......
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 26 February 2007, 10:45:21
Quote
Quote
Max's coolant leak..  I'm going up when we can agree a time.. to look at the stat and coolant transfer pipe.. hopefully we will have a happy ending on that one..

Make sure you have a new stat, and stat bridge pipe plus bridge pipe to rad hose...plus associated seals....if its the latest design of stat it needs slightly longer bolts and the stat bolts need sealent as they go into a water jacket...

I have a feeling that either the hose is buggered or, more likely, the bridge pipe is buggered....(these are about 8 quid new with seals).........I suspect this following a little snippit I picked up from Max when we fired it up last thing at night ' the heads were changed around 60K miles'...its easy to damage when removing it and then its just a matter of time......
This pipe?
 PIPE, THERMOSTAT HOUSING TO HOSE    90411629 13 38 320 1  
Title: Re: V6 Cambelt party - Brackley
Post by: Marks DTM Calib on 26 February 2007, 11:16:41
Yes....
Title: Re: V6 Cambelt party - Brackley
Post by: Bo Bo on 26 February 2007, 12:53:28
Quote
Yes, despite what the local tourist information had told me, the Crown Hotel in Brackley would appear to be a sh!thole.  Personally, every time I've been in there, I've never made it past the first door on the left ::)
I certainly wouldn't recommend it. My room was OK apart from only having one light (a bedside lamp) but the bathroom was minging  :(
& as for the first door on the left; steer clear of the draught lager  [smiley=thumbdown.gif]
Title: Re: V6 Cambelt party - Brackley
Post by: Kevin Wood on 26 February 2007, 13:43:21
Quote

Make sure you have a new stat, and stat bridge pipe plus bridge pipe to rad hose...plus associated seals....if its the latest design of stat it needs slightly longer bolts and the stat bolts need sealent as they go into a water jacket...
 

Was thinking about this on the way home. Both times we stopped on the way home, the top rad. hose and bleed pipe through the TB to the expansion tank were stone cold. Massaging the top hose a little soon got hot water running round the system. Max also said that it was OK at speed but temperature crept up when stopped.

I'm thinking that a leak on radiator side of the 'stat would draw a load of air into the system in the 'stat closed condition because the coolant pump is sucking on the bottom radiator hose against a closed thermostat - hence (relatively) low pressure in this part of the system. Air getting in the top of the system seemed to be far more of an issue when underway than coolant loss. I think we topped it up once but it certainly wasn't losing a lot of water. It just needed a massage every so often to get the coolant flowing again.

The gas could have come from a HGF, of course, but there was very little pressurisation of the system so thermostat and transfer pipe looks worth a try.

Kevin
Title: Re: V6 Cambelt party - Brackley
Post by: cornishtaz on 26 February 2007, 13:48:32
I'd just like to add thanks to Elite Pete for the TC switch had to do some rewiring to get it working as it had the premini facelift loom. Now in and working correctly.
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 26 February 2007, 14:15:56
Quote
Quote
Yes, despite what the local tourist information had told me, the Crown Hotel in Brackley would appear to be a sh!thole.  Personally, every time I've been in there, I've never made it past the first door on the left ::)
I certainly wouldn't recommend it. My room was OK apart from only having one light (a bedside lamp) but the bathroom was minging  :(
& as for the first door on the left; steer clear of the draught lager  [smiley=thumbdown.gif]
I usually stick to bottled beer in many places - more difficult to spill when I've had a few, cuts down on the number of punches I get...

Nah, seriously, I do tend to stick to bottles in some places, as you know the drafts are gonna be crap.
Title: Re: V6 Cambelt party - Brackley
Post by: Elite Pete on 26 February 2007, 14:22:40
Quote
Quote
Yes, despite what the local tourist information had told me, the Crown Hotel in Brackley would appear to be a sh!thole.  Personally, every time I've been in there, I've never made it past the first door on the left ::)
I certainly wouldn't recommend it. My room was OK apart from only having one light (a bedside lamp) but the bathroom was minging  :(
& as for the first door on the left; steer clear of the draught lager  [smiley=thumbdown.gif]
My room was dodgy as well it had a strange bloke in there that kept snooring and farting all night.
Two single beds I might hastily add ;D
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 26 February 2007, 14:26:21
Quote
Two single beds I might hastily add ;D
So you claim.... ;)
Title: Re: V6 Cambelt party - Brackley
Post by: Auto Addict on 26 February 2007, 14:45:13
Quote
Quote
Two single beds I might hastily add ;D
So you claim.... ;)

Hallo sweetie ;)
Title: Re: V6 Cambelt party - Brackley
Post by: Elite Pete on 26 February 2007, 15:56:26
Quote
Quote
Quote
Two single beds I might hastily add ;D
So you claim.... ;)

Hallo sweetie ;)
You want to join us next time AA ;D ;D
Title: Re: V6 Cambelt party - Brackley
Post by: Auto Addict on 26 February 2007, 17:57:58
Quote
Quote
Quote
Quote
Two single beds I might hastily add ;D
So you claim.... ;)

Hallo sweetie ;)
You want to join us next time AA ;D ;D

I wouldn't want to cramp your style..... ::)
Title: Re: V6 Cambelt party - Brackley
Post by: Timbuk on 26 February 2007, 23:37:16
Quote
Quote
Quote
Quote
Quote
Two single beds I might hastily add ;D
So you claim.... ;)

Hallo sweetie ;)
You want to join us next time AA ;D ;D

I wouldn't want to cramp your style..... ::)

Excuse me ::)
Title: Re: V6 Cambelt party - Brackley
Post by: Bo Bo on 27 February 2007, 07:33:35
Quote
Quote
Quote
Quote
Quote
Quote
Two single beds I might hastily add ;D
So you claim.... ;)

Hallo sweetie ;)
You want to join us next time AA ;D ;D

I wouldn't want to cramp your style..... ::)

Excuse me ::)
You're excused  :D
Title: Re: V6 Cambelt party - Brackley
Post by: Timbuk on 27 February 2007, 07:35:40
Quote
Quote
Quote
Quote
Quote
Quote
Quote
Two single beds I might hastily add ;D
So you claim.... ;)

Hallo sweetie ;)
You want to join us next time AA ;D ;D

I wouldn't want to cramp your style..... ::)

Excuse me ::)
You're excused  :D

Thankyou :)
Title: Re: V6 Cambelt party - Brackley
Post by: Bo Bo on 27 February 2007, 08:08:51
Quote
Quote
Quote
Quote
Quote
Quote
Quote
Quote
Two single beds I might hastily add ;D
So you claim.... ;)

Hallo sweetie ;)
You want to join us next time AA ;D ;D

I wouldn't want to cramp your style..... ::)

Excuse me ::)
You're excused  :D

Thankyou :)
You're welcome  :)
Title: Re: V6 Cambelt party - Brackley
Post by: MikeDundee on 27 February 2007, 19:45:31
Quote
Quote
Quote
Quote
Quote
Quote
Quote
Quote
Quote
Two single beds I might hastily add ;D
So you claim.... ;)

Hallo sweetie ;)
You want to join us next time AA ;D ;D

I wouldn't want to cramp your style..... ::)

Excuse me ::)
You're excused  :D

Thankyou :)
You're welcome  :)

At the The Crown in Brackley anytime ;D ;D
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 27 February 2007, 19:53:58
Quote
Quote
Quote
Quote
Quote
Quote
Quote
Quote
Quote
Quote
Two single beds I might hastily add ;D
So you claim.... ;)

Hallo sweetie ;)
You want to join us next time AA ;D ;D

I wouldn't want to cramp your style..... ::)

Excuse me ::)
You're excused  :D

Thankyou :)
You're welcome  :)

At the The Crown in Brackley anytime ;D ;D
Except at 3am, when they haven't got any keys.... ;)
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 27 February 2007, 20:55:01
I seem to recall doing a few gearbox updates on Saturday, hopefully you all found it a very worthwhile improvement.  You can vote and post your views at

http://www.omegaowners.com/forum/YaBB.pl?num=1171491714

As promised, it was done at a lower rate of £20.

If you are happy with that rate, please PM me saying how you would like to settle, eg transfer, paypal, cheque etc, and I will send the appropriate details...
Title: Re: V6 Cambelt party - Brackley
Post by: theolodian on 02 March 2007, 12:49:01
Quote
I think tunnie wishes to come out of the closet....

(http://images.omegaowners.com/images/theboy/cambeltpartyfeb07/IMG_1789.JPG)

;)
;D ;D ;D

How did I miss that picture before?  LOL!
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 02 March 2007, 12:52:42
Quote
Quote
I think tunnie wishes to come out of the closet....

(http://images.omegaowners.com/images/theboy/cambeltpartyfeb07/IMG_1789.JPG)

;)
;D ;D ;D

How did I miss that picture before?  LOL!
:o - I don't remember posting that  :o.  I must have been pretty hammered by then...

But lets discuss the facts:
Tunnie has go girlfriend
Tunnie is photographed cuddling blokes

Looks suspicious to me ;D
Title: Re: V6 Cambelt party - Brackley
Post by: Martin_1962 on 02 March 2007, 13:11:43
Who's he cuddling?

Any tools still missing?

Anyone get the muchies?
Title: Re: V6 Cambelt party - Brackley
Post by: MaxV6 on 02 March 2007, 14:07:20
I think that's innocent enough...

it's JamesV6CDX , being held upright by Tunnie....  given the topple over state of J in the kitchen and such like.. i reckon Tunnie's being his usual selflessly helpful self and is holding the man up , to stop him trashing Mrs TB's Sofa and living room carpet.

Normally , James is fully equipped with Girlfriend, Child, and Dog.
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 02 March 2007, 15:03:34
Quote
I think that's innocent enough...

it's JamesV6CDX , being held upright by Tunnie....  given the topple over state of J in the kitchen and such like.. i reckon Tunnie's being his usual selflessly helpful self and is holding the man up , to stop him trashing Mrs TB's Sofa and living room carpet.

Normally , James is fully equipped with Girlfriend, Child, and Dog.
Nah, my take on it is that Tunnie is taking advantage of JamesV6CDX's incoherent state.... ;D
Title: Re: V6 Cambelt party - Brackley
Post by: Martin_1962 on 02 March 2007, 15:06:19
Quote
I think that's innocent enough...

it's JamesV6CDX , being held upright by Tunnie....  given the topple over state of J in the kitchen and such like.. i reckon Tunnie's being his usual selflessly helpful self and is holding the man up , to stop him trashing Mrs TB's Sofa and living room carpet.

Normally , James is fully equipped with Girlfriend, Child, and Dog.


Thought it was James - but picture was very small, haven't met the others (GF ect), but would have expected Markie to be holding him!!!!
Title: Re: V6 Cambelt party - Brackley
Post by: theolodian on 02 March 2007, 15:11:37
Quote
Quote
I think that's innocent enough...

it's JamesV6CDX , being held upright by Tunnie....  given the topple over state of J in the kitchen and such like.. i reckon Tunnie's being his usual selflessly helpful self and is holding the man up , to stop him trashing Mrs TB's Sofa and living room carpet.

Normally , James is fully equipped with Girlfriend, Child, and Dog.


Thought it was James - but picture was very small, haven't met the others (GF ect), but would have expected Markie to be holding him!!!!
Oh, I really shoudn't say this but I can't help myself . . . .

Maybe James wanted to be the submissive for once?  :P

That's me banned for a month, later dudes!  ;D
Title: Re: V6 Cambelt party - Brackley
Post by: x25xe on 02 March 2007, 17:45:41
I have been off line for a week due to work.  Just like to add my thanks for this event.  Although my car did not need the cam belt doing, it was great to take part in the event and meet people and learn from the experts.

I hope that the guy from Poole got home OK - I was the one who helped to reassemble his car.

As some of you may know, I was not feeling that great (terrible in fact) on the day, but I came up as I had promised Max that I would bring food.  Owing to feeling ill, I left rather early as I started to get cold.  To give you an idea how cold, I drove all the way back to Hayes (around 80 miles) with the heated seat on, the climate set to High and on fan speed 6.  I was in bed at 20:30.

I apologise for going early and not being that talkative during the day - I had trouble with coughing and sneezing.  However, I still enjoyed the day and the atmosphere was great.

Now I know the format of these events, I will come next time (fully fit I hope) better prepared for assisting with general dismantling reassembling etc.

It looks as though the evening was also throughly enjoyed and I hear that the Barby was excellent.

Thanks again to all and it was great to meet up.
Title: Re: V6 Cambelt party - Brackley
Post by: Admin on 02 March 2007, 18:40:55
Next time we done of of these, maybe we can arrange it for a warmer time of the year?!

2nd time we have done it in February!  ::)
Title: Re: V6 Cambelt party - Brackley
Post by: MikeDundee on 02 March 2007, 20:26:30
Quote
Next time we done of of these, maybe we can arrange it for a warmer time of the year?!

2nd time we have done it in February!  ::)

Yes I would second that, it was a wee bit chilly :y
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 02 March 2007, 20:30:26
Quote
Next time we done of of these, maybe we can arrange it for a warmer time of the year?!

2nd time we have done it in February!  ::)
Yes, I think the original plan was for late spring/early summer, but MaxV6's was urgent and made it earlier....

I guess we can still do another in a the summer....
Title: Re: V6 Cambelt party - Brackley
Post by: Auto Addict on 03 March 2007, 08:28:00
Quote
Next time we done of of these, maybe we can arrange it for a warmer time of the year?!

2nd time we have done it in February!  ::)

Boredom at this time of year? ::)
Title: Re: V6 Cambelt party - Brackley
Post by: Taxi_Driver on 03 March 2007, 10:12:42
Quote
Quote
I think that's innocent enough...

it's JamesV6CDX , being held upright by Tunnie....  given the topple over state of J in the kitchen and such like.. i reckon Tunnie's being his usual selflessly helpful self and is holding the man up , to stop him trashing Mrs TB's Sofa and living room carpet.

Normally , James is fully equipped with Girlfriend, Child, and Dog.
Nah, my take on it is that Tunnie is taking advantage of JamesV6CDX's incoherent state.... ;D

And Tunnie does have a big smile on his face  :o ;D
Title: Re: V6 Cambelt party - Brackley
Post by: tunnie on 03 March 2007, 10:16:43
 >:( >:(

not checked this tread for a while!

And that was James fault, he asked for the hug!  >:(  ;D ;D
Title: Re: V6 Cambelt party - Brackley
Post by: MaxV6 on 03 March 2007, 10:17:36
yea yeah, that's what they all say....... :-X
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 03 March 2007, 10:20:23
Quote
And that was James fault, he asked for the hug!
And you jumped at the chance ;)

Best offer this year maybe ;)
Title: Re: V6 Cambelt party - Brackley
Post by: theolodian on 03 March 2007, 10:21:30
Quote
Quote
And that was James fault, he asked for the hug!
And you jumped at the chance ;)

Best offer this year maybe ;)
Oooh, ouch!  :o

 :P ;D ;D
Title: Re: V6 Cambelt party - Brackley
Post by: tunnie on 03 March 2007, 11:47:25
barstards!  >:(
Title: Re: V6 Cambelt party - Brackley
Post by: MikeDundee on 03 March 2007, 15:28:34
Quote
Quote
I think tunnie wishes to come out of the closet....

(http://images.omegaowners.com/images/theboy/cambeltpartyfeb07/IMG_1789.JPG)

;)
;D ;D ;D

How did I miss that picture before?  LOL!

AAHHH...how sweet they look together ;D ;D
Title: Re: V6 Cambelt party - Brackley
Post by: hotel21 on 03 March 2007, 21:40:01
Do we need to go out and buy hats??   :D
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 03 March 2007, 21:43:37
Quote
Do we need to go out and buy hats??   :D
Only if you're a girl ;)
Title: Re: V6 Cambelt party - Brackley
Post by: hotel21 on 03 March 2007, 21:51:16
Quote
Quote
Do we need to go out and buy hats??   :D
Only if you're a girl ;)

Thought all you Engerlish chaps and chapettes wore hats at weddings??
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 03 March 2007, 21:52:57
Quote
Quote
Quote
Do we need to go out and buy hats??   :D
Only if you're a girl ;)

Thought all you Engerlish chaps and chapettes wore hats at weddings??
Err, no.  Unless you go to them posh ones with the silly tophats....
Title: Re: V6 Cambelt party - Brackley
Post by: hotel21 on 03 March 2007, 21:58:30
Quote
Quote
Quote
Quote
Do we need to go out and buy hats??   :D
Only if you're a girl ;)

Thought all you Engerlish chaps and chapettes wore hats at weddings??
Err, no.  Unless you go to them posh ones with the silly tophats....

bit like us and kilts then - public perception and all that   ;D
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 03 March 2007, 21:59:37
Quote
Quote
Quote
Quote
Quote
Do we need to go out and buy hats??   :D
Only if you're a girl ;)

Thought all you Engerlish chaps and chapettes wore hats at weddings??
Err, no.  Unless you go to them posh ones with the silly tophats....

bit like us and kilts then - public perception and all that   ;D
Phew! I'm glad that doesn't really happen often. Blokes in skirts and all that... ;D
Title: Re: V6 Cambelt party - Brackley
Post by: hotel21 on 03 March 2007, 22:01:01
Quote
Quote
Quote
Quote
Quote
Quote
Do we need to go out and buy hats??   :D
Only if you're a girl ;)

Thought all you Engerlish chaps and chapettes wore hats at weddings??
Err, no.  Unless you go to them posh ones with the silly tophats....

bit like us and kilts then - public perception and all that   ;D
Phew! I'm glad that doesn't really happen often. Blokes in skirts and all that... ;D

Did you know the ice you are skating on is quite thin here???      ;)
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 03 March 2007, 22:02:44
Quote
Quote
Quote
Quote
Quote
Quote
Quote
Do we need to go out and buy hats??   :D
Only if you're a girl ;)

Thought all you Engerlish chaps and chapettes wore hats at weddings??
Err, no.  Unless you go to them posh ones with the silly tophats....

bit like us and kilts then - public perception and all that   ;D
Phew! I'm glad that doesn't really happen often. Blokes in skirts and all that... ;D

Did you know the ice you are skating on is quite thin here???      ;)
Even though I feel safe at this distance,  :-X
Title: Re: V6 Cambelt party - Brackley
Post by: hotel21 on 03 March 2007, 22:05:35
Quote
Quote
Quote
Quote
Quote
Quote
Quote
Quote
Do we need to go out and buy hats??   :D
Only if you're a girl ;)

Thought all you Engerlish chaps and chapettes wore hats at weddings??
Err, no.  Unless you go to them posh ones with the silly tophats....

bit like us and kilts then - public perception and all that   ;D
Phew! I'm glad that doesn't really happen often. Blokes in skirts and all that... ;D

Did you know the ice you are skating on is quite thin here???      ;)
Even though I feel safe at this distance,  :-X

 8-)  no probs....  Got to be able to take it if you are happy to give it out.

stick and banter that is, nowt else...   ;D
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 03 March 2007, 22:09:49
Quote
Quote
Quote
Quote
Quote
Quote
Quote
Quote
Quote
Do we need to go out and buy hats??   :D
Only if you're a girl ;)

Thought all you Engerlish chaps and chapettes wore hats at weddings??
Err, no.  Unless you go to them posh ones with the silly tophats....

bit like us and kilts then - public perception and all that   ;D
Phew! I'm glad that doesn't really happen often. Blokes in skirts and all that... ;D

Did you know the ice you are skating on is quite thin here???      ;)
Even though I feel safe at this distance,  :-X

 8-)  no probs....  Got to be able to take it if you are happy to give it out.

stick and banter that is, nowt else...   ;D
But as I may meet you at Drax etc, I need to know if you're bigger than me ;D
Title: Re: V6 Cambelt party - Brackley
Post by: hotel21 on 03 March 2007, 22:12:22
Quote
Quote
Quote
Quote
Quote
Quote
Quote
Quote
Quote
Quote
Do we need to go out and buy hats??   :D
Only if you're a girl ;)

Thought all you Engerlish chaps and chapettes wore hats at weddings??
Err, no.  Unless you go to them posh ones with the silly tophats....

bit like us and kilts then - public perception and all that   ;D
Phew! I'm glad that doesn't really happen often. Blokes in skirts and all that... ;D

Did you know the ice you are skating on is quite thin here???      ;)
Even though I feel safe at this distance,  :-X

 8-)  no probs....  Got to be able to take it if you are happy to give it out.

stick and banter that is, nowt else...   ;D
But as I may meet you at Drax etc, I need to know if you're bigger than me ;D

6 foot, hairy faced, 15 and a half stone and streetwise, been out to play with the nice public for almost 25 years??  Your call.....   :y   ;D
Title: Re: V6 Cambelt party - Brackley
Post by: Marks DTM Calib on 03 March 2007, 22:23:15
Is this some sort of new Top Trumps....
Title: Re: V6 Cambelt party - Brackley
Post by: Tony H on 03 March 2007, 22:25:01
Quote
Quote
Quote
Quote
Quote
Quote
Quote
Quote
Quote
Quote
Quote
Do we need to go out and buy hats??   :D
Only if you're a girl ;)

Thought all you Engerlish chaps and chapettes wore hats at weddings??
Err, no.  Unless you go to them posh ones with the silly tophats....

bit like us and kilts then - public perception and all that   ;D
Phew! I'm glad that doesn't really happen often. Blokes in skirts and all that... ;D

Did you know the ice you are skating on is quite thin here???      ;)
Even though I feel safe at this distance,  :-X

 8-)  no probs....  Got to be able to take it if you are happy to give it out.

stick and banter that is, nowt else...   ;D
But as I may meet you at Drax etc, I need to know if you're bigger than me ;D

6 foot, hairy faced, 15 and a half stone and streetwise, been out to play with the nice public for almost 25 years??  Your call.....   :y   ;D
Thats fighting talk ;)
Title: Re: V6 Cambelt party - Brackley
Post by: hotel21 on 03 March 2007, 22:28:43
Naaahhhh..   just having a laugh.    I reckon boredom has a grip on us both tonight..     :P
Title: Re: V6 Cambelt party - Brackley
Post by: hotel21 on 03 March 2007, 22:29:30
Anyway.....  He started it by calling me a girl.....   ;D
Title: Re: V6 Cambelt party - Brackley
Post by: hotel21 on 03 March 2007, 22:30:21
then there was the skirt thing.....
Title: Re: V6 Cambelt party - Brackley
Post by: Tony H on 03 March 2007, 22:38:25
Hats off to you chaps north of the border to wear clothes that allow gale force winds to whistle around your meat and two veg. RESPECT!!! 8-)
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 04 March 2007, 15:05:36
LOL, Hotel21, you win ;) :y
Title: Re: V6 Cambelt party - Brackley
Post by: MaxV6 on 04 March 2007, 15:18:24
Leak appears fixed....   long term watch on it.  will keep you all advised....

a bazillion thanks to James V6CDX for his invaluable assistance with that....

and everyone else for the earlier efforts also//


afraid we didn't get as far as looking for sockets on the end of the hand-brake cable , as the stat housing and transfer pipe proved "obstinate" ....


I'll see about getting a garage to do the handbrake cable , and retrieve any sockets next week.

Max
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 04 March 2007, 15:23:30
Quote
Leak appears fixed....   long term watch on it.  will keep you all advised....

a bazillion thanks to James V6CDX for his invaluable assistance with that....

and everyone else for the earlier efforts also//


afraid we didn't get as far as looking for sockets on the end of the hand-brake cable , as the stat housing and transfer pipe proved "obstinate" ....


I'll see about getting a garage to do the handbrake cable , and retrieve any sockets next week.

Max
Unlikely to be sockets there (they'll all be in people's engine bays, please check!), but my rachet spanner may well be on there.... ;D
Title: Re: V6 Cambelt party - Brackley
Post by: Timbuk on 04 March 2007, 15:40:45
Quote
Quote
Leak appears fixed....   long term watch on it.  will keep you all advised....

a bazillion thanks to James V6CDX for his invaluable assistance with that....

and everyone else for the earlier efforts also//


afraid we didn't get as far as looking for sockets on the end of the hand-brake cable , as the stat housing and transfer pipe proved "obstinate" ....


I'll see about getting a garage to do the handbrake cable , and retrieve any sockets next week.

Max
Unlikely to be sockets there (they'll all be in people's engine bays, please check!), but my rachet spanner may well be on there.... ;D

There's a socket in this engine bay, somewhere by the o/s chassis leg ;) , we couldn't find it in the dark

(http://i106.photobucket.com/albums/m275/timbuk1969/DSCF0197-1.jpg)
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 04 March 2007, 15:52:57
Quote
Quote
Quote
Leak appears fixed....   long term watch on it.  will keep you all advised....

a bazillion thanks to James V6CDX for his invaluable assistance with that....

and everyone else for the earlier efforts also//


afraid we didn't get as far as looking for sockets on the end of the hand-brake cable , as the stat housing and transfer pipe proved "obstinate" ....


I'll see about getting a garage to do the handbrake cable , and retrieve any sockets next week.

Max
Unlikely to be sockets there (they'll all be in people's engine bays, please check!), but my rachet spanner may well be on there.... ;D

There's a socket in this engine bay, somewhere by the o/s chassis leg ;) , we couldn't find it in the dark

(http://i106.photobucket.com/albums/m275/timbuk1969/DSCF0197-1.jpg)
Do you remember what size it was?
Title: Re: V6 Cambelt party - Brackley
Post by: Timbuk on 04 March 2007, 15:58:55
Quote
Quote
Quote
Quote
Leak appears fixed....   long term watch on it.  will keep you all advised....

a bazillion thanks to James V6CDX for his invaluable assistance with that....

and everyone else for the earlier efforts also//


afraid we didn't get as far as looking for sockets on the end of the hand-brake cable , as the stat housing and transfer pipe proved "obstinate" ....


I'll see about getting a garage to do the handbrake cable , and retrieve any sockets next week.

Max
Unlikely to be sockets there (they'll all be in people's engine bays, please check!), but my rachet spanner may well be on there.... ;D

There's a socket in this engine bay, somewhere by the o/s chassis leg ;) , we couldn't find it in the dark

(http://i106.photobucket.com/albums/m275/timbuk1969/DSCF0197-1.jpg)
Do you remember what size it was?

Sorry Jaime, i didn't drop it, without naming names it was Mark :D.....ooops
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 04 March 2007, 15:59:42
Quote
Quote
Quote
Quote
Quote
Leak appears fixed....   long term watch on it.  will keep you all advised....

a bazillion thanks to James V6CDX for his invaluable assistance with that....

and everyone else for the earlier efforts also//


afraid we didn't get as far as looking for sockets on the end of the hand-brake cable , as the stat housing and transfer pipe proved "obstinate" ....


I'll see about getting a garage to do the handbrake cable , and retrieve any sockets next week.

Max
Unlikely to be sockets there (they'll all be in people's engine bays, please check!), but my rachet spanner may well be on there.... ;D

There's a socket in this engine bay, somewhere by the o/s chassis leg ;) , we couldn't find it in the dark

(http://i106.photobucket.com/albums/m275/timbuk1969/DSCF0197-1.jpg)
Do you remember what size it was?

Sorry Jaime, i didn't drop it, without naming names it was Mark :D.....ooops
Bloody amateurs ;D
Title: Re: V6 Cambelt party - Brackley
Post by: Timbuk on 04 March 2007, 16:01:22
Quote
Quote
Quote
Quote
Quote
Quote
Leak appears fixed....   long term watch on it.  will keep you all advised....

a bazillion thanks to James V6CDX for his invaluable assistance with that....

and everyone else for the earlier efforts also//


afraid we didn't get as far as looking for sockets on the end of the hand-brake cable , as the stat housing and transfer pipe proved "obstinate" ....


I'll see about getting a garage to do the handbrake cable , and retrieve any sockets next week.

Max
Unlikely to be sockets there (they'll all be in people's engine bays, please check!), but my rachet spanner may well be on there.... ;D

There's a socket in this engine bay, somewhere by the o/s chassis leg ;) , we couldn't find it in the dark

(http://i106.photobucket.com/albums/m275/timbuk1969/DSCF0197-1.jpg)
Do you remember what size it was?

Sorry Jaime, i didn't drop it, without naming names it was Mark :D.....ooops
Bloody amateurs ;D

Thats why he had his Haynes Manual with him ::)
Title: Re: V6 Cambelt party - Brackley
Post by: Elite Pete on 04 March 2007, 16:05:33
Quote
Quote
Quote
Quote
Quote
Quote
Quote
Leak appears fixed....   long term watch on it.  will keep you all advised....

a bazillion thanks to James V6CDX for his invaluable assistance with that....

and everyone else for the earlier efforts also//


afraid we didn't get as far as looking for sockets on the end of the hand-brake cable , as the stat housing and transfer pipe proved "obstinate" ....


I'll see about getting a garage to do the handbrake cable , and retrieve any sockets next week.

Max
Unlikely to be sockets there (they'll all be in people's engine bays, please check!), but my rachet spanner may well be on there.... ;D

There's a socket in this engine bay, somewhere by the o/s chassis leg ;) , we couldn't find it in the dark

(http://i106.photobucket.com/albums/m275/timbuk1969/DSCF0197-1.jpg)
Do you remember what size it was?

Sorry Jaime, i didn't drop it, without naming names it was Mark :D.....ooops
Bloody amateurs ;D

Thats why he had his Haynes Manual with him ::)
I bet its not there now :(
Title: Re: V6 Cambelt party - Brackley
Post by: MaxV6 on 04 March 2007, 16:15:25
Jaime, we tried ringing to arrange for James and family to pop over and return your socket set.


but you had the temerity to be otherwise engaged somewhere ;) (no answer to mobile or landline)

I'll drop it over over the next couple of days... when's convenient for you mate????


no signs of the scuttle clips hanging around on the garage floor are there???

Max
Title: Re: V6 Cambelt party - Brackley
Post by: TheBoy on 04 March 2007, 16:27:43
Quote
Jaime, we tried ringing to arrange for James and family to pop over and return your socket set.


but you had the temerity to be otherwise engaged somewhere ;) (no answer to mobile or landline)

I'll drop it over over the next couple of days... when's convenient for you mate????


no signs of the scuttle clips hanging around on the garage floor are there???

Max
I think I've found one clip.

Apologises for ignoring the phone, the forum was down at the time  :-[