Omega Owners Forum
Chat Area => General Discussion Area => Topic started by: Big_Roger on 20 October 2010, 16:17:17
-
Hi All,
I am trying to get into the workings of a SE26T251GB10 Siemens dishwasher.
Anyone had anything to do with them. Have turned it on side but can't see how to get into the pumps etc.
Roger
-
I see you didn't have much luck here either Roger ::)
http://www.fixya.com/support/t6487496-dishwasher_se26t251gb10_not ;D
-
Try PMing Stokie Steve a topman fixing washing machines etc
-
Try PMing Stokie Steve a topman fixing washing machines etc
I wouldn't trust anyone from Stoke to fix anything. Probably take all the good bits out and replace them with clapped out parts...like you do with omegas. :P
-
That's fightin' talk Steve! ;D
-
That's fightin' talk Steve! ;D
I couldn't bring myself to fight with her. :-*
-
Hi Rog
Theres a couple of different versions of these so difficult via pc without seeing machine.
However, solid plastic base means front kickstrip off for access to drain pump, 2 screws at side plastic slides forward. Some times easier if you take front outer door panel off. Then theres a metal plinth behind plastic kickstrip 2 screws, drain pump middle front of sump twists off like a bayonet bulb.
Access to wash pump, wash capacitor & heater is R/H side panel off, 2 screws at front then worktop off to release rear of side panel.
Water intake chambers and flood prevention device behind left hand side panel, same removal as right H.
Hope this helps
Steve
And wotchit STMO12345 !
-
Hi Steve,
Many thanks for that. Great help.
And there I was thinking I had found something more inaccessible than working on the V6 engine.
Cheers
Roger
-
Nope. :-?