Omega Owners Forum
Chat Area => General Car Chat => Topic started by: Kieran on 05 December 2009, 00:39:36
-
Believe it or not i have never drilled out rivets before, so is there a way of doing it.After drilling out do you then pull out the remainder with pliers and how much do you need to drill out. The reason for this is because i need to get into the digi dash on my Sennie to replace a capacitor and it looks like it is riveted down in 5 places to stop tampering. :y
-
generally, drill until the head comes off and diss assemble from there. Not sure in your case though. I guess it still applies...
-
After drilling out do you then pull out the remainder with pliers and how much do you need to drill out.
Drill the head off as already stated, then push what is left through.
Once you have it apart, retrieve the bits.
-
on the subject of drilling rivits, i'll need to do this to replace a window motor. Is there any alternative to rivets? i don't have a rivet gun :(
-
on the subject of drilling rivits, i'll need to do this to replace a window motor. Is there any alternative to rivets? i don't have a rivet gun :(
£10 for a basic rivet gun. Go on, you know you want one.
(http://www.machinemart.co.uk/images/library/product/medium/04/040213150.jpg?)
http://www.machinemart.co.uk/shop/product/details/cht135-62-pce-hand-riveter-kit
-
on the subject of drilling rivits, i'll need to do this to replace a window motor. Is there any alternative to rivets? i don't have a rivet gun :(
£10 for a basic rivet gun. Go on, you know you want one.
(http://www.machinemart.co.uk/images/library/product/medium/04/040213150.jpg?)
http://www.machinemart.co.uk/shop/product/details/cht135-62-pce-hand-riveter-kit
Cheers :y