Omega Owners Forum
Chat Area => General Car Chat => Topic started by: tunnie on 24 March 2010, 12:06:25
-
Just received a box of goodies from Telio, loads of Polyflex looks much better to work with than copper tubing, loads of other bits of brackets, joins and such. Went through everything i had with him yesterday and he sent it that evening :y
Not even paid for any of it yet :o
Good to see he's back to glowing reports i read previously :y
-
Just received a box of goodies from Telio, loads of Polyflex looks much better to work with than copper tubing, loads of other bits of brackets, joins and such. Went through everything i had with him yesterday and he sent it that evening :y
Not even paid for any of it yet :o
Good to see he's back to glowing reports i read previously :y
Yep... I got a vapour filter back in September time and still haven't paid! Reminded him when I asked for the ones he's sent with your stuff and he said we'll sort it out later in the week :y :y
TBH, the stuff you've ordered has been done after he and I had a long chat so, kind of, in my name (sort of) and we have a very good relationship... Probably chat every couple of weeks about ideas and suggestions for his kit :y :y
-
Just received a box of goodies from Telio, loads of Polyflex looks much better to work with than copper tubing, loads of other bits of brackets, joins and such. Went through everything i had with him yesterday and he sent it that evening :y
Not even paid for any of it yet :o
Good to see he's back to glowing reports i read previously :y
Yep... I got a vapour filter back in September time and still haven't paid! Reminded him when I asked for the ones he's sent with your stuff and he said we'll sort it out later in the week :y :y
TBH, the stuff you've ordered has been done after he and I had a long chat so, kind of, in my name (sort of) and we have a very good relationship... Probably chat every couple of weeks about ideas and suggestions for his kit :y :y
odd how good tradesmen are poor on accounts, lights in the garage i had fitted in November by a good sparky we know, still not paid for those either! :o
-
odd how good tradesmen are poor on accounts, lights in the garage i had fitted in November by a good sparky we know, still not paid for those either! :o
Very true actually.
It's ok until you get one maintaining an aircraft where paperwork is vital. :-X
Kevin
-
Just received a box of goodies from Telio, loads of Polyflex looks much better to work with than copper tubing, loads of other bits of brackets, joins and such. Went through everything i had with him yesterday and he sent it that evening :y
Not even paid for any of it yet :o
Good to see he's back to glowing reports i read previously :y
Yep... I got a vapour filter back in September time and still haven't paid! Reminded him when I asked for the ones he's sent with your stuff and he said we'll sort it out later in the week :y :y
TBH, the stuff you've ordered has been done after he and I had a long chat so, kind of, in my name (sort of) and we have a very good relationship... Probably chat every couple of weeks about ideas and suggestions for his kit :y :y
odd how good tradesmen are poor on accounts, lights in the garage i had fitted in November by a good sparky we know, still not paid for those either! :o
He's still working very closely with me to try and solve the "Lag" we V6 owners are suffering and replacing the filter was an elimination thing... He may not even charge me as it was his suggestion :y :y Let's be honest, his aftercare (as far as I'm concerned) has been impeccable and that's why I keep putting people on to him :y :y
-
Don't forget Tunnie, i'm expecting you to write the definitive 'Idiots Guide to LPG Conversion', complete with piccies when you've finished. ;D ;D ;D ;) :y
-
Don't forget Tunnie, i'm expecting you to write the definitive 'Idiots Guide to LPG Conversion', complete with piccies when you've finished. ;D ;D ;D ;) :y
I've got my camera ready to go too... I reckon there'll be a collaboration on a "How To" in the near future ;)
-
Don't forget Tunnie, i'm expecting you to write the definitive 'Idiots Guide to LPG Conversion', complete with piccies when you've finished. ;D ;D ;D ;) :y
I've got my camera ready to go too... I reckon there'll be a collaboration on a "How To" in the near future ;)
Count me in. :y I have a full set of V6 pictures.
Kevin
-
Thankyou guys, i'm really looking forward to 'seeing' the finished job. I'm also quite excited about trying this for myself at some point in the not too distant future, & as I live in the frozen wastes of the North (& I don't just mean the weather!!) I can't expect too much in the way of 'hands on' help by clued up members lol ;D ;) :y
-
Don't forget Tunnie, i'm expecting you to write the definitive 'Idiots Guide to LPG Conversion', complete with piccies when you've finished. ;D ;D ;D ;) :y
I've got my camera ready to go too... I reckon there'll be a collaboration on a "How To" in the near future ;)
Count me in. :y I have a full set of V6 pictures.
Kevin
Already had ::) ::)
I reckon that between yours, mine and the ones taken this weekend we have enough to cover most eventualities :y
-
I wish we'd taken some of TheBoy's "behind the number plate" filler mounting. Then again it's held together with my
birdsh1t welding so perhaps we should make a more presentable version? ;)
Kevin
-
I wish we'd taken some of TheBoy's "behind the number plate" filler mounting. Then again it's held together with my birdsh1t welding so perhaps we should make a more presentable version? ;)
Kevin
I don't believe for a minute it's as bad as that Kevin ;D :y
-
Got my camera ready here and charged too :y
-
I wish we'd taken some of TheBoy's "behind the number plate" filler mounting. Then again it's held together with my birdsh1t welding so perhaps we should make a more presentable version? ;)
Kevin
I don't believe for a minute it's as bad as that Kevin ;D :y
.. and I've been polite enough not to mention Chrisgixer's "angle grinder art" in making the necessary cuts. ;D
Kevin