Omega Owners Forum
Chat Area => General Car Chat => Topic started by: tunnie on 03 May 2010, 19:06:59
-
As requested, some extra pictures of mounting locations for injectors, vaporiser :y
Injector Mounting Bracket on Cam Cover, i should actually replace back bracket its too short.
(http://dl.dropbox.com/u/803897/Omega/LPG/Extra/DSC00735.JPG)
Its simply been cut to length and had injectors bolted on.
(http://dl.dropbox.com/u/803897/Omega/LPG/Extra/DSC00736.JPG)
LPG Filter, its important to mount this for easy access as they are a service item, they are stamped at every 10k, but thats due to dirty Europe fuel, i shall be replacing mine every year (30-40k)
(http://dl.dropbox.com/u/803897/Omega/LPG/Extra/DSC00738.JPG)
LPG Vapour temp sensor
(http://dl.dropbox.com/u/803897/Omega/LPG/Extra/DSC00739.JPG)
Vaporiser mounted to drivers side wing
(http://dl.dropbox.com/u/803897/Omega/LPG/Extra/DSC00740.JPG)
Pipe from heater matrix into Vaporiser, if you can see that white plastic, thats a straight through joiner so goes from Heater matrix into vaporiser
(http://dl.dropbox.com/u/803897/Omega/LPG/Extra/DSC00742.JPG)
Vaporiser from above
(http://dl.dropbox.com/u/803897/Omega/LPG/Extra/DSC00746.JPG)
Bolt to secure vaporisor
(http://dl.dropbox.com/u/803897/Omega/LPG/Extra/DSC00749.JPG)
-
Not coolant temp sensor, LPG Vapour temp sensor ;)
Coolant temp sensor is screwed into/attached to Vaporiser :y
-
Not coolant temp sensor, LPG Vapour temp sensor ;)
Coolant temp sensor is screwed into/attached to Vaporiser :y
D'oh, sorry, i'll change that :y
-
Thanks Tunnie, those pics are brilliant! :y David Bailey eat your heart out!!! ;D
Seriously though, thanks a lot tunnie mate :y
-
no problemo :y
-
Thanks Tunnie, those pics are brilliant! :y David Bailey eat your heart out!!! ;D
Seriously though, thanks a lot tunnie mate :y
Thought you had a V6 for some reason :-[ :-[
I'll try and do the How 2 for a 4 pot in the next couple of days :y
-
Thanks Tunnie, those pics are brilliant! :y David Bailey eat your heart out!!! ;D
Seriously though, thanks a lot tunnie mate :y
Thought you had a V6 for some reason :-[ :-[
I'll try and do the How 2 for a 4 pot in the next couple of days :y
Thanks Paul, I am looking forward to seeing it! :y
As for a V6?, afraid not, i'm just another 'lost cause' 4 potter, like tunnie ;) ;D
-
Thanks Tunnie, those pics are brilliant! :y David Bailey eat your heart out!!! ;D
Seriously though, thanks a lot tunnie mate :y
Thought you had a V6 for some reason :-[ :-[
I'll try and do the How 2 for a 4 pot in the next couple of days :y
Thanks Paul, I am looking forward to seeing it! :y
As for a V6?, afraid not, i'm just another 'lost cause' 4 potter, like tunnie ;) ;D
4pots make light work of towing dead V6's :P :-X ;D
-
Thanks Tunnie, those pics are brilliant! :y David Bailey eat your heart out!!! ;D
Seriously though, thanks a lot tunnie mate :y
Thought you had a V6 for some reason :-[ :-[
I'll try and do the How 2 for a 4 pot in the next couple of days :y
Thanks Paul, I am looking forward to seeing it! :y
As for a V6?, afraid not, i'm just another 'lost cause' 4 potter, like tunnie ;) ;D
Sorry for the delay Phil... Too much stuff going on at the moment!
I'm starting it now (which is how I stumbled upon this thread ::)) so should be up in a couple of days :y
-
Thanks Tunnie, those pics are brilliant! :y David Bailey eat your heart out!!! ;D
Seriously though, thanks a lot tunnie mate :y
Thought you had a V6 for some reason :-[ :-[
I'll try and do the How 2 for a 4 pot in the next couple of days :y
Thanks Paul, I am looking forward to seeing it! :y
As for a V6?, afraid not, i'm just another 'lost cause' 4 potter, like tunnie ;) ;D
Sorry for the delay Phil... Too much stuff going on at the moment!
I'm starting it now (which is how I stumbled upon this thread ::)) so should be up in a couple of days :y
Please, no apologies necessary Paul :-[
I'm pleased you have found the time to do it at all mate, and very grateful to you for your previous help, which together with Tunnie, Kevin Wood & new member Ernie, means i'm now pretty much clued up on the way to go ::) ;D :y
-
Thanks Tunnie, those pics are brilliant! :y David Bailey eat your heart out!!! ;D
Seriously though, thanks a lot tunnie mate :y
Thought you had a V6 for some reason :-[ :-[
I'll try and do the How 2 for a 4 pot in the next couple of days :y
Thanks Paul, I am looking forward to seeing it! :y
As for a V6?, afraid not, i'm just another 'lost cause' 4 potter, like tunnie ;) ;D
Sorry for the delay Phil... Too much stuff going on at the moment!
I'm starting it now (which is how I stumbled upon this thread ::)) so should be up in a couple of days :y
Please, no apologies necessary Paul :-[
I'm pleased you have found the time to do it at all mate, and very grateful to you for your previous help, which together with Tunnie, Kevin Wood & new member Ernie, means i'm now pretty much clued up on the way to go ::) ;D :y
It's in the Test Area at the moment... I'm just reading through it a couple of times and I'll PM Jimbob to get it moved :y