Omega Owners Forum
Chat Area => General Car Chat => Topic started by: horvath2500 on 20 July 2010, 17:50:10
-
hi, i am new here dont know how to use forums, so dont know where to look, i have the dripping oil syndrome from the plastic rocker covers, i hear you can fit the metal ones, but plenty reference on the net stating oil filler in wrong place and that people have fitted them, but not modifying the metal ones where would you top it up and how as it would be burried surely?
-
hi again, where do i read replies, or will it just appear? or please someone write something so i know what i am doing..
thanks
-
hi, i am new here dont know how to use forums, so dont know where to look, i have the dripping oil syndrome from the plastic rocker covers, i hear you can fit the metal ones, but plenty reference on the net stating oil filler in wrong place and that people have fitted them, but not modifying the metal ones where would you top it up and how as it would be burried surely?
Your plastic cam covers are likely leaking due to blocked breathers. Fitting ally cam covers will just allow your breather system to find another way of relieving that pressure, and that's usually via the rear crank shaft seal. A bugger to change. Replace the seals in you existing covers with Vauxhall seals - pattern will age harden very quickly & you'll be at square one very quickly - and cler your breathers.
All shown in the maintenance section. :y
click here ------>http://www.omegaowners.com/forum/YaBB.pl?num=1152598350<------ ;)
-
hi again, where do i read replies, or will it just appear? or .....
here! ;)
yes! ;D ;D ;D :y
-
hi thanks for your reply, car has undergone a lot of work recently, has had head gaskets, oil cooler all inlet gaskets, new rocker cover gaskets and has been back to the garage twice to fix still leaking but at least just one side, i am fed up with the smell as i use car for a taxi, all breathers clear according to mechanic, so someone has attempted to seal both and i got original gaskets so i just thought metal ones should solve it finally and get no excuses, this time, i just need piece of mind as everytime it leaks they blame on plastic covers, will the metal ones fit and if so do i need different gaskets and is there any space to top up/ remove oil cap.
thanks
-
how do andy b, you must be the omega king? :y
-
.... you must be the omega king? :y
only cos I type a load of sh1te! ;D ;D ;D ;D
Plastic cam covers do get blamed for a lot of the leaks, but they're normally not to blame.
Darth Loo-Knee or Elite Pete tarvel a bit around the country & are more than capable under the bonnet of an Omega. You could ask them if your garage is unable to stop the leaks. :y
-
i bought the omega as they are capable of high miles and its a bloomin nice drive, but no one seems to know what they are doing with them, i cant find anyone locally that would solve issues without costing me 100's, how do i contact these nice dudes and where do they work from? as i would love someone decent to look after it.
thanks :D :D :y
-
I really wouldn't bother with the metal Vectra covers, as you say the filler is in the wrong position and also the holes for the plug leads don't line up correctly. If your cam cover gaskets are fitted properly, the breathers cleaned and the gaskets were genuine from a Vauxhall dealer, they shouldn't leak ;)
-
I should change my name to Mr Ben ;D
-
thanks bud, but garage now done that job twice, and obviously costs me, they fit new gaskets do job and it leaks, i have know the mechanic for 30 years so i do trust him but he says it needs a new rocker, i as a paying punter fed up with car going in garage, paying out and then no better, i still have another fault yet after this one that no one else knows how to fix and has to go back to gm to fault find supposidly, i live nr preston anyone local ish to sort and service my omega regullarly????
nudge nudge, i have jammie wagon wheels ;D ;D ;D
-
thanks bud, but garage now done that job twice, and obviously costs me, they fit new gaskets do job and it leaks, i have know the mechanic for 30 years so i do trust him but he says it needs a new rocker, i as a paying punter fed up with car going in garage, paying out and then no better, i still have another fault yet after this one that no one else knows how to fix and has to go back to gm to fault find supposidly, i live nr preston anyone local ish to sort and service my omega regullarly????
nudge nudge, i have jammie wagon wheels ;D ;D ;D
If you trust the mechanic - possibly misplaced trust if he's done it twice already and not cured it - get him to use genuine GM cam cover gaskets (not any pattern ones - they are all poor) and use a torque wrench this time. The cam cover bolts are 8Nm. Not 10Nm or 'nipped up'. 8Nm.
Every single one that I have seen prematurely fail has, without fail, been due to poor workmanship or poor quality pattern gaskets.
-
thanks bud, but garage now done that job twice, and obviously costs me, they fit new gaskets do job and it leaks, i have know the mechanic for 30 years so i do trust him but he says it needs a new rocker, i as a paying punter fed up with car going in garage, paying out and then no better, i still have another fault yet after this one that no one else knows how to fix and has to go back to gm to fault find supposidly, i live nr preston anyone local ish to sort and service my omega regullarly????
nudge nudge, i have jammie wagon wheels ;D ;D ;D
I'm only in Northwich, Juction 19 of the M6 ;)
Bring it down and i'll have a look :y
-
thanks bud, i will get him just to put it back, i will email you if the address is the correct one and i will leave it with you in a couple of weeks if thats what you do???
not sure :y
-
Just bring it down, i'll put the kettle on we can have a brew and then i'll have a look see ;)
-
top geezer i have emailed you :y :y :y