Omega Owners Forum
Chat Area => General Car Chat => Topic started by: TheBoy on 01 August 2010, 19:23:34
-
Looked like it was going to rain this morning, so rather than get wet, I played with a NCDC2013 and a CID (not Omega) I had acquired.
NCDC, no code index on it which is odd, yet does think it has a telematics :-/. Looks like its got a fault with the cd flap sensor. Job for another day, as don't want to get too involved, in case sun comes out and I can play with the Rover's ABS fault.
CID, cannot get it to work. Assuming its from an early veccy, but even after making up a loom, no go. Presumably it doesn't need to talk to other CAN devices to start up (looks like it is the interface between mid and low speed can)?
Still grim outside, so decide to play with a little pressie I picked up last Tuesday. Only laptop I have with required port just hangs when the software starts. Bugger this, gonna have lunch.
Looks brighter outside, so jack up the Rover again, hoping the ABS sensor bolt will be more cooperative, having had a blast of WD overnight (no plusgas, and chunkynuts in town won't sell anything uselful like that). Oh cock, rounded off the bloody bolt >:(
Sod the Rover, lets fix the leak on the MV6. Success at last :D. Except I need to clear a fault code because some idiot left the ICV connector off ::)
On the upside, the ZX10 has another years MOT on it :D
-
Looked like it was going to rain this morning, so rather than get wet, I played with a NCDC2013 and a CID (not Omega) I had acquired.
NCDC, no code index on it which is odd, yet does think it has a telematics :-/. Looks like its got a fault with the cd flap sensor. Job for another day, as don't want to get too involved, in case sun comes out and I can play with the Rover's ABS fault.
CID, cannot get it to work. Assuming its from an early veccy, but even after making up a loom, no go. Presumably it doesn't need to talk to other CAN devices to start up (looks like it is the interface between mid and low speed can)?
Still grim outside, so decide to play with a little pressie I picked up last Tuesday. Only laptop I have with required port just hangs when the software starts. Bugger this, gonna have lunch.
Looks brighter outside, so jack up the Rover again, hoping the ABS sensor bolt will be more cooperative, having had a blast of WD overnight (no plusgas, and chunkynuts in town won't sell anything uselful like that). Oh cock, rounded off the bloody bolt >:(
Sod the Rover, lets fix the leak on the MV6. Success at last :D. Except I need to clear a fault code because some idiot left the ICV connector off ::)
On the upside, the ZX10 has another years MOT on it :D
What about the lappy you got at the Lakes meet? Anything on there worth using??
-
Looked like it was going to rain this morning, so rather than get wet, I played with a NCDC2013 and a CID (not Omega) I had acquired.
NCDC, no code index on it which is odd, yet does think it has a telematics :-/. Looks like its got a fault with the cd flap sensor. Job for another day, as don't want to get too involved, in case sun comes out and I can play with the Rover's ABS fault.
CID, cannot get it to work. Assuming its from an early veccy, but even after making up a loom, no go. Presumably it doesn't need to talk to other CAN devices to start up (looks like it is the interface between mid and low speed can)?
Still grim outside, so decide to play with a little pressie I picked up last Tuesday. Only laptop I have with required port just hangs when the software starts. Bugger this, gonna have lunch.
Looks brighter outside, so jack up the Rover again, hoping the ABS sensor bolt will be more cooperative, having had a blast of WD overnight (no plusgas, and chunkynuts in town won't sell anything uselful like that). Oh cock, rounded off the bloody bolt >:(
Sod the Rover, lets fix the leak on the MV6. Success at last :D. Except I need to clear a fault code because some idiot left the ICV connector off ::)
On the upside, the ZX10 has another years MOT on it :D
What about the lappy you got at the Lakes meet? Anything on there worth using??
I was eyeing that up earlier, but then couldn't remember why I had it :-[ - in fairness, I probably had a hangover when we talked about it ::)
-
Looked like it was going to rain this morning, so rather than get wet, I played with a NCDC2013 and a CID (not Omega) I had acquired.
NCDC, no code index on it which is odd, yet does think it has a telematics :-/. Looks like its got a fault with the cd flap sensor. Job for another day, as don't want to get too involved, in case sun comes out and I can play with the Rover's ABS fault.
CID, cannot get it to work. Assuming its from an early veccy, but even after making up a loom, no go. Presumably it doesn't need to talk to other CAN devices to start up (looks like it is the interface between mid and low speed can)?
Still grim outside, so decide to play with a little pressie I picked up last Tuesday. Only laptop I have with required port just hangs when the software starts. Bugger this, gonna have lunch.
Looks brighter outside, so jack up the Rover again, hoping the ABS sensor bolt will be more cooperative, having had a blast of WD overnight (no plusgas, and chunkynuts in town won't sell anything uselful like that). Oh cock, rounded off the bloody bolt >:(
Sod the Rover, lets fix the leak on the MV6. Success at last :D. Except I need to clear a fault code because some idiot left the ICV connector off ::)
On the upside, the ZX10 has another years MOT on it :D
What about the lappy you got at the Lakes meet? Anything on there worth using??
I was eyeing that up earlier, but then couldn't remember why I had it :-[ - in fairness, I probably had a hangover when we talked about it ::)
As far as I know, simply needs charging. Dunno whats on it though! ;D
-
Looked like it was going to rain this morning, so rather than get wet, I played with a NCDC2013 and a CID (not Omega) I had acquired.
NCDC, no code index on it which is odd, yet does think it has a telematics :-/. Looks like its got a fault with the cd flap sensor. Job for another day, as don't want to get too involved, in case sun comes out and I can play with the Rover's ABS fault.
CID, cannot get it to work. Assuming its from an early veccy, but even after making up a loom, no go. Presumably it doesn't need to talk to other CAN devices to start up (looks like it is the interface between mid and low speed can)?
Still grim outside, so decide to play with a little pressie I picked up last Tuesday. Only laptop I have with required port just hangs when the software starts. Bugger this, gonna have lunch.
Looks brighter outside, so jack up the Rover again, hoping the ABS sensor bolt will be more cooperative, having had a blast of WD overnight (no plusgas, and chunkynuts in town won't sell anything uselful like that). Oh cock, rounded off the bloody bolt >:(
Sod the Rover, lets fix the leak on the MV6. Success at last :D. Except I need to clear a fault code because some idiot left the ICV connector off ::)
On the upside, the ZX10 has another years MOT on it :D
What about the lappy you got at the Lakes meet? Anything on there worth using??
I was eyeing that up earlier, but then couldn't remember why I had it :-[ - in fairness, I probably had a hangover when we talked about it ::)
As far as I know, simply needs charging. Dunno whats on it though! ;D
So remind me why I have it? :-[
-
if you want a productive day, help me fit some shocks during the week....
-
if you want a productive day, help me fit some shocks during the week....
I'm sure TB will come round to drink tea and eat bikkies whilst you struggle. ;D
-
if you want a productive day, help me fit some shocks during the week....
I'm sure TB will come round to drink tea and eat bikkies whilst you struggle. ;D
And watch me spin around on the other end of an air-gun ;D
-
if you want a productive day, help me fit some shocks during the week....
I'm sure TB will come round to drink tea and eat bikkies whilst you struggle. ;D
And watch me spin around on the other end of an air-gun ;D
Good idea, some cabaret will help to keep his spirits up. ;D
-
Looked like it was going to rain this morning, so rather than get wet, I played with a NCDC2013 and a CID (not Omega) I had acquired.
NCDC, no code index on it which is odd, yet does think it has a telematics :-/. Looks like its got a fault with the cd flap sensor. Job for another day, as don't want to get too involved, in case sun comes out and I can play with the Rover's ABS fault.
CID, cannot get it to work. Assuming its from an early veccy, but even after making up a loom, no go. Presumably it doesn't need to talk to other CAN devices to start up (looks like it is the interface between mid and low speed can)?
Still grim outside, so decide to play with a little pressie I picked up last Tuesday. Only laptop I have with required port just hangs when the software starts. Bugger this, gonna have lunch.
Looks brighter outside, so jack up the Rover again, hoping the ABS sensor bolt will be more cooperative, having had a blast of WD overnight (no plusgas, and chunkynuts in town won't sell anything uselful like that). Oh cock, rounded off the bloody bolt >:(
Sod the Rover, lets fix the leak on the MV6. Success at last :D. Except I need to clear a fault code because some idiot left the ICV connector off ::)
On the upside, the ZX10 has another years MOT on it :D
What about the lappy you got at the Lakes meet? Anything on there worth using??
I was eyeing that up earlier, but then couldn't remember why I had it :-[ - in fairness, I probably had a hangover when we talked about it ::)
As far as I know, simply needs charging. Dunno whats on it though! ;D
So remind me why I have it? :-[
I dont have a charger to fit it and it may well have some software that would be handy for your Rover....
-
if you want a productive day, help me fit some shocks during the week....
You may find this an odd concept, but I do this strange thing that most people call 'work' during the week ;)
-
if you want a productive day, help me fit some shocks during the week....
You may find this an odd concept, but I do this strange thing that most people call 'work' during the week ;)
Work? :-/
You mean you go to work for more than 3 days in a row? :o
I'm not due back in now until Friday :)
-
On the upside, the ZX10 has another years MOT on it :D
Good news.
With or without running issues?
-
On the upside, the ZX10 has another years MOT on it :D
Good news.
With or without running issues?
Do they do MOT's on a Sunday