Omega Owners Forum

Chat Area => General Car Chat => Topic started by: unlucky mark mv6 on 26 September 2010, 10:03:20

Title: found some lowering springs.......
Post by: unlucky mark mv6 on 26 September 2010, 10:03:20

.....on ebay,and they state that the front is lowered by 65mm,and the rear by 45mm.Shouldent that be the other way around. :-/

Title: Re: found some lowering springs.......
Post by: Gaffers on 26 September 2010, 10:38:30

Depends how many gimps DLK has put in the boot :D

Title: Re: found some lowering springs.......
Post by: feeutfo on 26 September 2010, 17:11:41

Can't think of a set of springs I've seen advertised  that did not give the same drop back and front. Avoid IMO. Irmscher give 30 mill all round. And that is plenty. 65 mill would be ridiculous surely    :o

Title: Re: found some lowering springs.......
Post by: spud1990 on 26 September 2010, 22:12:31

e mail them and ask i would say there the rong way around. :P :y

Title: Re: found some lowering springs.......
Post by: Phil on 27 September 2010, 08:03:18

Not uncommon, apparently its the 'German' look, lower at the front than at the back

There are numerous ones available for the Vectra C that go 40 front 25 rear

Title: Re: found some lowering springs.......
Post by: unlucky mark mv6 on 27 September 2010, 19:46:20

Ok folks,think ill e-mail em and ask.While we are on the subject of springs,are there any other vauxhalls that use the same spring as the mig,e.g vec c,as it would be a lot easier to get the springs im after. :)