Omega Owners Forum
Chat Area => General Car Chat => Topic started by: marke on 04 December 2010, 22:35:52
-
freind has calibra with mig 30 i in it when it get hot aal power is lost any ideas :y
-
Nope, didn't understand a word of that....
-
don't think i've seen such a short post with so many spelling errors! Translating into English i think it reads, a friend has Calibra with 3.0 V6, when it gets hot all power is lost.
marke, it might have helped if you proof read the post first ::)
Any codes stored?
-
freind has calibra with mig 30 i in it when it get hot aal power is lost any ideas :y
Read the fault codes first! :y
-
Should have left the engine in a proper car!
-
Calibra's are great cars, one of my all time favourites :y
-
ill hazzard a guess at the crank sensor, seeing as the heat will be cooking the sensor wiring, altho seeing as its been squeezed into a calibra, there is no way of knowing or telling what wiring, ecu, engine components have been used.
Either need more detail or try a calibra forum
-
Calibra's are great cars, one of my all time favourites :y
Yes but an Omega had to die to do this.
There are too many wrong wheel drive cars as it is.
-
freind has calibra with mig 30 i in it when it get hot aal power is lost any ideas :y
As said earlier, you should check for any error codes and then post them here.
Link to paperclip test:
http://www.omegaowners.com/forum/YaBB.pl?num=1189022687
-
freind has calibra with mig 30 i in it when it get hot aal power is lost any ideas :y
As said earlier, you should check for any error codes and then post them here.
Link to paperclip test:
http://www.omegaowners.com/forum/YaBB.pl?num=1189022687
From memory, Calibra has a 10 pin diag socket, so will need to check pinouts first.
-
sorry all posted just as i was going work
-
freind has calibra with mig 30 i in it when it get hot aal power is lost any ideas :y
As said earlier, you should check for any error codes and then post them here.
Link to paperclip test:
http://www.omegaowners.com/forum/YaBB.pl?num=1189022687
From memory, Calibra has a 10 pin diag socket, so will need to check pinouts first.
ALDL type connection then. Should be able to blink codes out without too much of an issue.
-
Calibra's are great cars, one of my all time favourites :y
Yes but an Omega had to die to do this.
There are too many wrong wheel drive cars as it is.
Hmmm, perhaps the Omega was already dead? Besides, 3.0 Vectra's and Calibra's are great cars, GM really missed an opportunity not dropping the 3.0 in at the factory....
As far as wrong wheel drive goes.... Hmmmm, I don't think 99% of drivers give a stuff which wheels are driven. Yes, on here we all love the way big heavy RWD cars drive and handle but not all FWD cars handle poorly.