Omega Owners Forum
		Chat Area => General Car Chat => Topic started by: Ploppy on 20 January 2011, 18:05:05
		
			
			- 
				Hi all..
 
 any one know the best way to release a seized hand brake on a 2000 kia rio, seems the o/s wheel wont move and cant move the car... hasnt been used for some time... the hand brake was left on !! doh !!
 
 Ploppy :y :y
- 
				make sure the car is in gear and release the handbrake,take a hammer and give the rear brake backplate a good couple of clouts being careful not to hit wheel cylinder or brake pipes,once its released you need to strip and clean/replace parts as required
			
- 
				Thanks Henry
 
 
 
 will give that ago tomorrow
 
 cheers
 
 Ploppy :y :y
- 
				I'd be careful hitting the backplate... It my well be quite thin ;)
 
 Personally I'd take the wheel off and give the drum a few taps from all directions with a soft faced hammer :y
 
 That method never let me down when called out to seized handbrakes in the past
- 
				I'd be inclined to try a kettle or 2 of boiling water first....