Omega Owners Forum
Chat Area => General Car Chat => Topic started by: sassanach on 28 March 2011, 09:19:03
-
just a quickie! does anyone know if there are any firmware upgrades for the stag 300 kit?,its just that on my tub i have never been able to use the "inspection or individual injector adjustment facility. :y
-
just a quickie! does anyone know if there are any firmware upgrades for the stag 300 kit?,its just that on my tub i have never been able to use the "inspection or individual injector adjustment facility. :y
Morning Mr Sassanch :)
Is that facility perhaps reserved for stag plus / canbus compatible kits?
-
Quick look says yes for the 300 premium? Is that the same as yours?
http://www.ac.com.pl/en/produkt/296/stag-300-premium
-
Quick look says yes for the 300 premium? Is that the same as yours?
http://www.ac.com.pl/en/produkt/296/stag-300-premium
Or rather, there is a download, not sure if it's an update, or if it will offer the facility mentioned. :-/
-
The firmware / software for the 300 plus/premium won't work with the Stag 300.
I think version 1.14 is the latest Stag 300. Mine certainly came with an earlier version (just under 3 years ago) so if yours has not been updated it's likely that there is a newer version. I believe individual injector trims are implemented on mine.
The latest version can be downloaded from www.stag.com.pl.
Kevin
-
where on earth do you find anything on that site? :-?
-
Mine had 3 firmware updates in quick succession when I got it a year ago - I guess it was a new ECU at the time. Been none since.
Mine is a Stag300 Plus, not the Stag300.
-
whats a ".rar" file?
-
whats a ".rar" file?
Its a compressed file similar to a zip, plenty of free tools to extract them :y
-
where on earth do you find anything on that site? :-?
It seems they've "improved" their web site - or it's been hacked. They've done such a lousy job it's difficult to tell which. ;D
Here's the link to the software It's never been in a .rar file as far as I can remember.
http://www.ac.com.pl/public/pubonline/cms/files/Programy-i-instrukcje-obslugi/pl/Stag%20200%20300/SetupAcGasSynchro-1_14_1_0.exe
Just uninstall your previous version, run this exe to install the latest, and IIRC it prompts you to update the ECU. Note you may lose the ECU setup during the upgrade so make a note of the settings you currently have and do it when you've got the time to do a new calibration of the system.
Kevin
-
whats a ".rar" file?
download from here , version 3.93..
http://www.soft82.com/download/Windows/WinRAR
(mirror 1)