Omega Owners Forum
Chat Area => General Car Chat => Topic started by: Shackeng on 03 August 2011, 20:14:02
-
Give me one good reason why I should not junk the ones I replaced with Lemforders yesterday. I have rescued the poly bushes from the front for future use. :y
-
Delphi were appaling quality at one point....sure it wasnt normal though :-/
-
The Delphi ones I have seen had incredibly soft bushes. So soft it was possible to press I finger into the rubber itself. There was a spate of complaints and failures on here about a year or more ago and one member reported a recall from Delphi.
Leaver the wishbone out from the subframe. It should be very firm and with a torch there should bo ne cracks or splits visible in the narrow gap visible to the rubber itself. If it flaps about easily bin it. Rearward bush is purely a visual thing to see if it split away around the edges.
-
The Delphi ones I have seen had incredibly soft bushes. So soft it was possible to press I finger into the rubber itself. There was a spate of complaints and failures on here about a year or more ago and one member reported a recall from Delphi.
Leaver the wishbone out from the subframe. It should be very firm and with a torch there should bo ne cracks or splits visible in the narrow gap visible to the rubber itself. If it flaps about easily bin it. Rearward bush is purely a visual thing to see if it split away around the edges.
RTFQ Chris! 8-) 8-) 8-) ;D ;D ;D :y
-
Oh FFS. Forget that bit then ;D