Omega Owners Forum

Chat Area => General Car Chat => Topic started by: Mr Skrunts on 13 August 2011, 01:57:16

Title: Rover 25 Speedo Wiring
Post by: Mr Skrunts on 13 August 2011, 01:57:16

My better halfs 25 had to have a new gear box after the guyfitting the new clutch whacked a hole in the removing the bent clutch arm (Long story)

In the process itseems the speedo transponder wiring got damaged, so he cut it off and told her to gat another from a scrappy. (Muppet)  Although she has been told it has been fixed, it still does not work.

Does any one have access to a wiring diagram for one of these, or how to actually test the wiring to find the fault.

T.I.A.   :y :y

Title: Re: Rover 25 Speedo Wiring
Post by: TheBoy on 13 August 2011, 08:08:33

Hold on Skrunts, I'll dig it out...  ...might take 30mins or so...

Title: Re: Rover 25 Speedo Wiring
Post by: Martian on 13 August 2011, 11:23:37

Be aware that there might be more than one transponder type for your car, normally denoted by the colour of the cog if it is a mechanically driven one.
If it's an induction type transponder, I would expect them to be the same (although don't hold me to that).

Title: Re: Rover 25 Speedo Wiring
Post by: Mr Skrunts on 14 August 2011, 22:35:45

Quote

Hold on Skrunts, I'll dig it out...  ...might take 30mins or so...

Many thanks for helping out TB very much appreciated.   :y :y

Title: Re: Rover 25 Speedo Wiring
Post by: JamesV6CDX on 14 August 2011, 22:54:09

Skrunts, Sophie has a 03 reg 25, if i can clarify anything bt looking at that, let me know....