Omega Owners Forum
Chat Area => Omega Gallery => Topic started by: MikeDundee on 04 November 2007, 17:41:43
-
The dials at night from Heiz (Germany) :y
(http://i85.photobucket.com/albums/k65/mickdundee_01/DSCF0022.jpg)
-
How did you do this?
-
How did you do this?
The dials are a special order from germany various choices for dial colour and background, eg, white, red, in in my case I chose Blue :y
-
How did you do this?
The dials are a special order from germany various choices for dial colour and background, eg, white, red, in in my case I chose Blue :y
Do all the ignition lights, fog, lights, and indicator etc light up, i have seen the cheap ones and they dont light very clearly
:-/ :-/ :-/
-
Here's a picture of my dials in the daylight, you can see the cut outs for the warning light etc
(http://memimage.cardomain.net/member_images/11/web/275000-275999/275300_51_full.jpg)
-
And heres another pic of the dials; all the lights show when lit no problem, There is an obvious diferrence between jim's dials and my own ::)
(http://i85.photobucket.com/albums/k65/mickdundee_01/DSCF0020.jpg)
-
And heres another pic of the dials; all the lights show when lit no problem, There is an obvious diferrence between jim's dials and my own ::)
(http://i85.photobucket.com/albums/k65/mickdundee_01/DSCF0020.jpg)
I think your dials look more like mine :y
-
Both look nice, where can you order them from?
-
@mikedundee ...
whats behind the "extra" light cutout on yours then ???
-
Here's a picture of my dials in the daylight, you can see the cut outs for the warning light etc
(http://memimage.cardomain.net/member_images/11/web/275000-275999/275300_51_full.jpg)
Where were these from Jim, they look good, i see there is an extra cutout on the others, just under the 160mph numbers.
:-/
-
Extra cut out is for the fog lights, i have answered my own question.
Still, where do they come from.
-
Extra cut out is for the fog lights, i have answered my own question.
Still, where do they come from.
A couple of years ago I lived in Germany, and came across a company which made white dials for the omega but the dials only had km's (kilometres) not miles, he told me he could make me a set but he would need to make a template so I took out my origianl dials he scanned then into the computer and made a set of white dials on his machine.
Follow the link below :y
http://www.white-face-gauges.com/html/omega_b_a_tachoscheiben_fur_ih.html
-
Extra cut out is for the fog lights, i have answered my own question.
Still, where do they come from.
A couple of years ago I lived in Germany, and came across a company which made white dials for the omega but the dials only had km's (kilometres) not miles, he told me he could make me a set but he would need to make a template so I took out my origianl dials he scanned then into the computer and made a set of white dials on his machine.
Follow the link below :y
http://www.white-face-gauges.com/html/omega_b_a_tachoscheiben_fur_ih.html
Just sent an email to him
:y :y :y :y
-
Extra cut out is for the fog lights, i have answered my own question.
Still, where do they come from.
A couple of years ago I lived in Germany, and came across a company which made white dials for the omega but the dials only had km's (kilometres) not miles, he told me he could make me a set but he would need to make a template so I took out my origianl dials he scanned then into the computer and made a set of white dials on his machine.
Follow the link below :y
http://www.white-face-gauges.com/html/omega_b_a_tachoscheiben_fur_ih.html
Just sent an email to him
:y :y :y :y
Got them from the same place as Jim as per the link above, but they forgot to cut out the extra hole for the fog light, so I had to do that myself, I also asked for chrome dials and they sent white, they also took almost 3 months to get them from the date of ordering. :y
-
And heres another pic of the dials; all the lights show when lit no problem, There is an obvious diferrence between jim's dials and my own ::)
(http://i85.photobucket.com/albums/k65/mickdundee_01/DSCF0020.jpg)
How did you get to do the back bit silver mate i see you got the metal ring's. I've just got a set off the bay and the guy from german polished one ring on the wrong side he did send me a replacement... and did the same thing again so i've polished the other side myself that's life.
-
And heres another pic of the dials; all the lights show when lit no problem, There is an obvious diferrence between jim's dials and my own ::)
(http://i85.photobucket.com/albums/k65/mickdundee_01/DSCF0020.jpg)
How did you get to do the back bit silver mate i see you got the metal ring's. I've just got a set off the bay and the guy from german polished one ring on the wrong side he did send me a replacement... and did the same thing again so i've polished the other side myself that's life.
Foliatec spray from helfrauds, theres 2 tins you get, one a clear pre-coat, then you spray the finishing coat. the reason i done that was because I got a glue run when fitting the chrome rings >:(, was the only way to disguise/hide it :y......have fun ;)
-
And heres another pic of the dials; all the lights show when lit no problem, There is an obvious diferrence between jim's dials and my own ::)
(http://i85.photobucket.com/albums/k65/mickdundee_01/DSCF0020.jpg)
How did you get to do the back bit silver mate i see you got the metal ring's. I've just got a set off the bay and the guy from german polished one ring on the wrong side he did send me a replacement... and did the same thing again so i've polished the other side myself that's life.
Foliatec spray from helfrauds, theres 2 tins you get, one a clear pre-coat, then you spray the finishing coat. the reason i done that was because I got a glue run when fitting the chrome rings >:(, was the only way to disguise/hide it :y......have fun ;)
Is it design for iterior trim then and how did you get to the inside behind the clear plastic. Oh thanks for the info on what you used look's mint i could'ent se any glue.
Lee
-
And heres another pic of the dials; all the lights show when lit no problem, There is an obvious diferrence between jim's dials and my own ::)
(http://i85.photobucket.com/albums/k65/mickdundee_01/DSCF0020.jpg)
How did you get to do the back bit silver mate i see you got the metal ring's. I've just got a set off the bay and the guy from german polished one ring on the wrong side he did send me a replacement... and did the same thing again so i've polished the other side myself that's life.
Foliatec spray from helfrauds, theres 2 tins you get, one a clear pre-coat, then you spray the finishing coat. the reason i done that was because I got a glue run when fitting the chrome rings >:(, was the only way to disguise/hide it :y......have fun ;)
Is it design for iterior trim then and how did you get to the inside behind the clear plastic. Oh thanks for the info on what you used look's mint i could'ent se any glue.
Lee
With some difficulty; the face is glued to the housing, you have to carefully prise the face of the housing off, ideally with a very small flathead screwdriver a little bit at a time, it will come off :y
-
Heres some pics after the face of the housing has been taken off..................
(http://i85.photobucket.com/albums/k65/mickdundee_01/2007_0225brack0056.jpg)
(http://i85.photobucket.com/albums/k65/mickdundee_01/2007_0225brack0051.jpg)
(http://i85.photobucket.com/albums/k65/mickdundee_01/2007_0225brack0036.jpg)
-
And heres another pic of the dials; all the lights show when lit no problem, There is an obvious diferrence between jim's dials and my own ::)
(http://i85.photobucket.com/albums/k65/mickdundee_01/DSCF0020.jpg)
How did you get to do the back bit silver mate i see you got the metal ring's. I've just got a set off the bay and the guy from german polished one ring on the wrong side he did send me a replacement... and did the same thing again so i've polished the other side myself that's life.
Foliatec spray from helfrauds, theres 2 tins you get, one a clear pre-coat, then you spray the finishing coat. the reason i done that was because I got a glue run when fitting the chrome rings >:(, was the only way to disguise/hide it :y......have fun ;)
Is it design for iterior trim then and how did you get to the inside behind the clear plastic. Oh thanks for the info on what you used look's mint i could'ent se any glue.
Lee
With some difficulty; the face is glued to the housing, you have to carefully prise the face of the housing off, ideally with a very small flathead screwdriver a little bit at a time, it will come off :y
Thank's for the info mate that's great its give me a top idea now and thank's for the pic's to.
lee
-
The dials at night from Heiz (Germany) :y
(http://i85.photobucket.com/albums/k65/mickdundee_01/DSCF0022.jpg)
Stupid question but how much?? I really really like!!!!!
-
VERY NICE! i love the blue dials and the yellow needles!
ive just done mine with blue LED replacements, looks spot on, lights it all up clearly, etc, but this is classier still :)
-
The dials at night from Heiz (Germany) :y
(http://i85.photobucket.com/albums/k65/mickdundee_01/DSCF0022.jpg)
Stupid question but how much?? I really really like!!!!!
About Euro 60 + p&p from Germany
-
The dials at night from Heiz (Germany) :y
(http://i85.photobucket.com/albums/k65/mickdundee_01/DSCF0022.jpg)
Stupid question but how much?? I really really like!!!!!
As Jim said 60+ euros, I actually paid 68 euros including postage, and they come in varying colour choices :y
-
VERY NICE! i love the blue dials and the yellow needles!
ive just done mine with blue LED replacements, looks spot on, lights it all up clearly, etc, but this is classier still :)
I have a set of those LED's but a bit of a pain getting them all to work (well in daylight anyway), thanks to EP.....Decided the dials solve that problem and no need for LEDS. :y
-
Looks cool mike,
Ill be ordering a set myself, Ive had a set from them before and was very good. Also be putting some LED's in the MID too.
-
Looks cool mike,
Ill be ordering a set myself, Ive had a set from them before and was very good. Also be putting some LED's in the MID too.
Hows it Going?...............not seen you on for a while........anyway have you changed your parcel shelf doggee yet or is it still the same as below ;D ;D ;D
(http://i85.photobucket.com/albums/k65/mickdundee_01/2007_0528keswick2007billing0140.jpg)
-
no she left me she ran off with Shaving Ken.... :'(
Im doing fine thanks, been busy moving down south! How are you?
-
no she left me she ran off with Shaving Ken.... :'(
Im doing fine thanks, been busy moving down south! How are you?
Fine thanks :y..whereaboots down south are u moving too then?
-
Now living in Stone, a village just outside of Stafford.
I just got an Email back from Heiz, 89 Euros plus 12 Euros P+P, for a set of dials. Where did you get your chrome rings?
-
Now living in Stone, a village just outside of Stafford.
I just got an Email back from Heiz, 89 Euros plus 12 Euros P+P, for a set of dials. Where did you get your chrome rings?
Got the chrome rings on ebay, tomseifer, again from germany, have a search they are still on ebay for sale about 23 euros?
-
Cheers Ill have look.
-
Just ordered myself a set of rings. When I get some more cash i'll have the dials on order too.
-
Just ordered myself a set of rings. When I get some more cash i'll have the dials on order too.
:y