Omega Owners Forum
Chat Area => Omega Gallery => Topic started by: allllec on 25 May 2009, 15:17:47
-
Hello, picked up my mv6 on Friday. Done about 300miles, aside from the shocking economy (or lack of) I'm pretty happy. Only cost £700 notes!
(http://homepage.ntlworld.com/frances.hewitt1/Pictures/Omega/23052009383.jpg)
(http://homepage.ntlworld.com/frances.hewitt1/Pictures/Omega/23052009385.jpg)
(http://homepage.ntlworld.com/frances.hewitt1/Pictures/Omega/23052009384.jpg)
-
Looks in good condition. Very nice :y
-
Nice :y
Whats wrong underneath ::)
-
what he doing there? ;D
did you kill him? lol nice car i always love omega
-
Markey Mark's got a peachy MV6 est. in the same colour. The mpg is only to be expected but worth it every time you hit the loud pedal. Do you know when the cambelt/water pump was last done? 40,000miles or 4 years, if not sure do it.
Anyway, welcome to the world of Migging, it's a pain at times but once you're hooked..... :D 8-) :y
-
Cam belt was done circa 10k ago thank god! Although when I've got a bit more cash behind me it'll get done again to be on the safe side. Will also give me a chance to have a good inspection of the block etc.
Nice :y
Whats wrong underneath ::)
Outside temp sensor was just hanging out! So mate was sticking it back in the correct place!
Very pleased with it, got a few things I need to fix (and no cash to do it! grr >:()
Exhaust. On the passenger side the exhaust has rusted through and is no longer attached to the middle silencer.
PAS. Pas pump is knackered (or I believe it is)
Oil Leak. Believe its coming from the rocker cover, need to look in to it propperly at some point! I'd hazzard a guess and say crank case breather is blocked up as well!
And a few other small bits, front splitter is broken, looks like the previous owner ran something over!
None of the local breakers yards have any omegas in which is a pain in the bum so these bits are going to have to wait!
-
Cam belt was done circa 10k ago thank god! Although when I've got a bit more cash behind me it'll get done again to be on the safe side. Will also give me a chance to have a good inspection of the block etc.
Nice :y
Whats wrong underneath ::)
Outside temp sensor was just hanging out! So mate was sticking it back in the correct place!
Very pleased with it, got a few things I need to fix (and no cash to do it! grr >:()
Exhaust. On the passenger side the exhaust has rusted through and is no longer attached to the middle silencer.
PAS. Pas pump is knackered (or I believe it is)
Oil Leak. Believe its coming from the rocker cover, need to look in to it propperly at some point! I'd hazzard a guess and say crank case breather is blocked up as well!
And a few other small bits, front splitter is broken, looks like the previous owner ran something over!
None of the local breakers yards have any omegas in which is a pain in the bum so these bits are going to have to wait!
PM RobseyMV6 as he is breaking a MV6 saloon at the moment and i'm sure he will have the parts you require.
Nice car by the way mate and enjoy it
Andy :y
-
Hi Alec,
Looks like you are just down the road from me but just can't remember the name of the road. Hope you enjoy your mig, its looking good.
Paul :y
-
not bad looking mig .give dave marshall a shout he is breaking a 98plate i beleive good look with her and enjoy doing all the bits :y
-
Lovely looking car!
Are those the Irmscher wheels or the MV6 ones stripped of Anthracite?
What rubber do you use?
Matthew
-
Nice motor 8-)
Need to replace my legnum with an omega estate (manual) is your's an auto or manual?
-
That's why the economy is so bad Allllec, there's something trapped under your front wheel ;D Seriously, looks like you got yourself a deal there :y :y
-
Cheers guys.
Its Thirlmere Avenue in Tilehurst, where abouts are you?
Irmisher wheels (or whatever they're called!) and also has Irmishcher carbon fibre effect interior trim! :D
-
Cheers guys.
Its Thirlmere Avenue in Tilehurst, where abouts are you?
Irmisher wheels (or whatever they're called!) and also has Irmishcher carbon fibre effect interior trim! :D
I thought it was just couldn't remember the name. I'm in Tilehurst as well off Knowsley Road, May have to pop round after work and say hi.
Paul :y
-
Ah near lil Tesco? Aha very small world!! You defiantly should :) Could do with someone with some omega experience to talk me through a few bits ;)
-
nice motor mate good colour shame about the washer jet missing i had mine robbed cost me nearly 50quid for a new on :'(
-
Hoping it won't cost me that much! Will just pinch one from the scrappy me thinks ;D
-
Hoping it won't cost me that much! Will just pinch one from the scrappy me thinks ;D
You will be lucky Alec ;D ;D
Paul :y
-
looks a nice clean motor you got there :y
-
Got a new washer jet from the scrappie. Cost me nothing.
(http://homepage.ntlworld.com/frances.hewitt1/Pictures/11062009429.jpg)
Also managed to get a PAS pump, worked beautifully although steering has started getting slightly heavier again recently, if its another tired pump I'm not going to be happy! >:(