Omega Owners Forum

Trading Area => Cars for Sale & wanted => Topic started by: philhoward on 19 April 2011, 10:18:28

Title: Cheap V6 manual wanted
Post by: philhoward on 19 April 2011, 10:18:28

As title really - cheaper (and easier!) to buy a whole car for the bits needed (good engine/box, plus a host of other odds and sods).  A little T&T would be useful to get it home without needing trailers etc.  2.5 or 3.0 (2.5 preferred), must be manual, to help with the project..(tidy body with goosed mechanicals, but it was cheap...i.e. free!)

Closer to Stoke on Trent the better..and cheaper the better!  What you got peeps?

Title: Re: Cheap V6 manual wanted
Post by: 2woody on 28 April 2011, 15:57:28

I could probably assemble all the bits you're likely to need.

Plus I have a fair idea what you're going to do with them......!

Title: Re: Cheap V6 manual wanted
Post by: bobbertbear on 28 April 2011, 19:13:15

i have a t reg 2.5 manual,taxed till end of the month an tested till either june or july cant remember,leather alloys just had cam cover gaskets done(vauxhall ones) but not had time to wash engine down so pretty oily yet had to put a crank pulley belt an water pump on last week had two anti roll bar links on the front couple of weeks back an a back spring,only problem is am in scotland.

Title: Re: Cheap V6 manual wanted
Post by: philhoward on 28 April 2011, 23:49:41

Whereabouts in Scotland?  Ayr or Inverness?  Also the crunch...how much?

Title: Re: Cheap V6 manual wanted
Post by: bobbertbear on 29 April 2011, 17:46:24

near perth,i'd let it go for £300

Title: Re: Cheap V6 manual wanted
Post by: philhoward on 29 April 2011, 20:09:56

If it was closer, i'd be up tomorrow :(  Sadly too far for me..but thanks anyway.

Title: Re: Cheap V6 manual wanted
Post by: philhoward on 02 May 2011, 20:03:14

Now sorted with what I need - thanks for all the replies...