Omega Owners Forum
Trading Area => Car Parts, bits For Sale & Wanted => Topic started by: RobseyMV6 on 04 May 2009, 18:20:59
-
Omega mv6 auto in blue saloon paint code Z 282, low mileage 93K
but new engine fitted in 2004, cloth recaro seats, all complete but no washer jets...
Middle and back boxes are no good, apart from that, the rest can go to a new home ::)
(http://i290.photobucket.com/albums/ll262/m1ct/DSC01258.jpg)
-
What condition are the wheels and tyres in? I have cash waiting. You have PM.
-
How much for 2x 3 Litre Heads with cams then & the headlamp washer jets & pipes?
-
What condition are the wheels and tyres in? I have cash waiting. You have PM.
the wheels are potentially sold, waiting to hear from the guy about pick-up
-
How much for 2x 3 Litre Heads with cams then & the headlamp washer jets & pipes?
both washer jets were broken off
i do have pipes to the pumps, how much of the pipework do you need?
as to heads, engine may be sold complete this week, waiting to hear back. I`ll update you if i still have it, thanks
-
i need the nozzle bits with the plastic nozzley bit pipes mate
-
i need the nozzle bits with the plastic nozzley bit pipes mate
Did you mean the part that bolts on to the under side of the xenon headlights? and pipes running just to the pump?
-
I have a couple of 3.0 heads here mate and a set of 3.0 cams if the engine from this sells as a whole :y
-
I have a couple of 3.0 heads here mate and a set of 3.0 cams if the engine from this sells as a whole :y
Will sale engine as hole, so hope he takes up your offer :y
-
Any luck with the rear door soleniod fitting mine? The number I have on mine is 90449074. Love to have central locking work on all the doors :y
Thanks
-
Yes, PM sent :)
-
Hi, heard anything about the wheels yet?
Also is the washer bottle available? I've just fitted headlight washers to mine and need a bottle with dual output.
Thanks
-
Hi, heard anything about the wheels yet?
Also is the washer bottle available? I've just fitted headlight washers to mine and need a bottle with dual output.
The guy should have turned up an hour ago >:( so looks like i have the wheels still. I hate time wasters >:(
Washer bottle i have, both preface and facelift, what bottle are you after? :y
-
I need the bottle for my pre facelift car but it has to have the output for headlight washers.
-
Ok have here, do you need anything but the washer bottle? eg pumps/pipes?
-
Hi, I read your PM first. Should have checked here before. I'll need the headlight washer pump with the bottle too if it comes without. I have all pipes. PM me with new price.
As I said I'll pass on the wheels but thanks for considering me.
-
PM sent :y
-
Hi Rob.
How much was it you were after for the wheels?
Also, what kind of nick is the header tank in? Me rebuilds starting to come together now, and its the last thing on my list. Refuse to pay stealer prices for that ;D
This ain't the one you showed me a year or so ago is it, with the popped tensioners??
O', and never got to thank you and your misses for the bump start :-[
-
Hi there! The bump start was at least some exercise for her ;D
PM sent
-
Yes, PM sent :)
Rob/ Marti,
Recieved the item today. Thanks again, hopefully I will figure out how to remove the window handle & get to replacing this over the w/e
Thanks,
Suhas
-
No problem Suhas :y
-
I have a couple of 3.0 heads here mate and a set of 3.0 cams if the engine from this sells as a whole :y
Can you use the 3.0 Cylinder heads in a 2.5 engine like the 3.0 litre cams?
....Or have I got the wrong end of the stick? :-[
-
Ok still have the engine for sale, yet another time waster from ebay lets you down again >:( >:(
-
How much do you want for the engine loom? If it's not been cut etc?
-
carbon fibre dash parts and door card trims available?
-
How much do you want for the engine loom? If it's not been cut etc?
I`ve got several wiring looms, are you after the 3.0 auto?
PM sent
-
carbon fibre dash parts and door card trims available?
Yup, got that
PM sent
-
Hi, do you have the drivers side door check strap and mechanism.
Thanks.
-
Hi mate can you pm me ur lowest price on teh engine please as i need 1 to save my car from the scrap yard
-
Hi mate can you pm me ur (I'm just lazy, can't be bothered to type 'you are') lowest price on teh engine please as i need 1 to save my car from the scrap yard
Pm sent :y
-
Hi, do you have the drivers side door check strap and mechanism.
Thanks.
Sorry all damaged what i had here :(
-
Drivers side glovebox?
-
Drivers side glovebox?
Will look tomorrow evening to see if any good, have a facelift one here but not sure if the same but looks it.
PM sent :y
-
Facelift ashtray complete?? :-/
-
Sorry Broocie, facelift was ex police, so none there..
-
hello mate!!
could i see some pictures of the front seats, as i will be looking for some, cheers!! :)
Adam
-
hello mate!!
could i see some pictures of the front seats, as i will be looking for some, cheers!! :)
Adam
PM me you're email address and i'll send you some pic this weekend :y
-
the pm has been sent! :)
Adam
-
any updares on the pics man? :)
-
Don't suppose you still have the offside windscreen washer jet housing and underbonnet connection (for an M reg Elite)?
Chris
-
Hi bud
I'm after front bumper with fog lights for 2.2CD Auto Xreg
I've seen yours like unpainted, which suits me, but wondered if that would fit?
Should it be any good for mine, is there a chance for it and what's the price?
cheerio
-
still many parts left off this blue mig.
all parts have been removed for quick despatch :y