Omega Owners Forum
Trading Area => Car Parts, bits For Sale & Wanted => Topic started by: B-Buster on 01 September 2009, 16:35:14
-
Hi all,
Does anyone happen to have an unused cable to install a CID + NCDR radio in my '99 B1? I've got all parts except for the cable. Thought I've got my hands on one at Ebay, but the seller went radiosilent after I did the payment. :( Good thing I used Paypal.
So, if someone has this cable, or know where to get one.. I'd be really happy to know.
Cheers!
-
[movedhere] Test Zone [move by] Jimbob.
-
hi,
you might have to make one up, do you have any of the connectors?. I'll have a look in my spares (will check later and reply). regards rob
-
I do not have any of the connectors. Thanks for checking. :)
-
hi,
you might have to make one up, do you have any of the connectors?. I'll have a look in my spares (will check later and reply). regards rob
update - for the CID which needs two cables, I have the large one plus a bit of loom hanging off it. The small rgb cable - I do not have but have a connector off a BOSE loom which I'm cuttting down to install just the amp, it fits but its not secure - you can try it might require a bit of tape to keep it in the back. As for the NCDR1100 connector :'( sorry don't have that one.
PM us your full address and I'll get them in the post - might take a couple of days as I'm not close to a post office next week, but will them get out the week :yafter
-
Asked my friend who is totally into these mods and he says I allready have that connector you're talking about which connects to the current MID. He also found an RGB cable.
Thanks a bunch for your offer though!
Still looking for the DIN connector and mini ISO.
-
Asked my friend who is totally into these mods and he says I allready have that connector you're talking about which connects to the current MID. He also found an RGB cable.
Thanks a bunch for your offer though!
Still looking for the DIN connector and mini ISO.
No problem, good luck with your search, regards