Omega Owners Forum
Trading Area => Car Parts, bits For Sale & Wanted => Topic started by: Darth Loo-knee on 24 November 2009, 13:51:20
-
The doors dont have any rust on them. The rear drivers side door bumper strip is damaged at the front edge.
The rear tailgate has some scratches on the top where it looks asthough some ladders have caught it.
It has three brand new tyres on it.
Everything is for sale on this car so let me know if you need anything.
Cheers
Daz :)
(http://i155.photobucket.com/albums/s304/Loo-knee/2-1.jpg)
(http://i155.photobucket.com/albums/s304/Loo-knee/3-1.jpg)
(http://i155.photobucket.com/albums/s304/Loo-knee/4-1.jpg)
(http://i155.photobucket.com/albums/s304/Loo-knee/6.jpg)
-
would this one have a headlight level sensor on it
-
would this one have a headlight level sensor on it
I do have one mate as we know so I will sort it out for you just had quite abit of crap lately to sort out :(
But I am nearly firing on all cylinders again :)
-
also looking for drivers side piece of radiator cover and clip
and 4 carpet clips that are in the luggage area (estate)in the middle going left to right
-
also looking for drivers side piece of radiator cover and clip
and 4 carpet clips that are in the luggage area (estate)in the middle going left to right
Will sort you those too :y
-
you are the man :y
pm price will send
-
Hi Daz,
what's the bonnet like and how much?
I had some boards on and they fell off and landed on my bonnet and put a couple of grooves in it.
I'll leave you the old bonnet so you will get the scrap value when you weigh in what's left of the car.
Cheers
Simon.
-
hey up dazz don't spose you have an aerial base for the estate ?+aerial .sat nave radio and phone one .thanks daz me old duck! :y
-
Hi Daz, what condition is the drivers door in...not sure if its scratched or dirty in the pics....and how much?
-
hey up dazz don't spose you have an aerial base for the estate ?+aerial .sat nave radio and phone one .thanks daz me old duck! :y
i will check tomorrow Pete then let you know
Daz
-
Need an offside rar brake caliper (bleed nipple snapped off mine) might have the glovebox as well.I think mines either grey or black,cant remember,will have to have a look. ::) :y
edit.Its grey but black would do,Im not fussy. ;D
-
Need an offside rar brake caliper (bleed nipple snapped off mine) might have the glovebox as well.I think mines either grey or black,cant remember,will have to have a look. ::) :y
edit.Its grey but black would do,Im not fussy. ;D
Think I have grey Albs will check tomorrow then let you know :y
-
nice one. :y..........o/side rear caliper ?? :-/
-
nice one. :y..........o/side rear caliper ?? :-/
Yes mate I will sort that out too :y
-
Have you got the headlights
-
Have you got the headlights
Yes I have mate :y
Sending you a PM now :y
-
hello
have You got head lamp washers? or am i blind?:)
-
Hi mbud
have you got the rear load cover
also whats the gear box :y
-
Hi mbud
have you got the rear load cover
also whats the gear box :y
The Load Cover has sen far better days being honest mate.
The Gearbox is an AR25 which is an auto and seems smooth :y
-
what size are the wheels and how much regards gaz from telford
-
HI
Have you got intermittent wiper relay - Part number: 90 494 187. If so let me know please. Thanks
-
hi just wondering if left and right section and rear exhaust box condition if good how much?
les
-
Just replied to all your posts Guys :y
-
received bits today as per usual perfect service :y
-
Hi, I'm looking for a windscreen washer dipstick, also an aerial for my 99 2.5TD CDX Estate, if available.
I also now need a good AR35 box.
Cheers
-
Hi, I'm looking for a windscreen washer dipstick, also an aerial for my 99 2.5TD CDX Estate, if available.
I also now need a good AR35 box.
Cheers
I have not seen many of the washer bottle dipsticks that are in one piece being honest, usually in the bottle somewhere ;D
I have a good AR25 gearbox but not a 35.
Daz ;)
-
I echo the sentiments of Mantagte, great service THANK YOU.
Dave :y
-
Do you have the lock barrel and a key for the glove box please?
Does your ashtray come out on a spring when pushed in, if so any chance of a photo of where the end of the spring fits onto the bit of plastic as in the photos below.
(http://i304.photobucket.com/albums/nn169/westo123/omega004-1.jpg)
(http://i304.photobucket.com/albums/nn169/westo123/omega005-1.jpg)
(http://i304.photobucket.com/albums/nn169/westo123/omega006-1.jpg)
-
(http://i155.photobucket.com/albums/s304/Loo-knee/omega006-2.jpg)
In the picture that plastic finger is upside down though.
Put the spring on the small plastic column first, then the plastic finger, you will need to push with a small screw driver the spring over where I have put the arrow :y
Hope that helps :y
-
Any chance of the clips/clamps of the airbox please?
-
Any chance of the clips/clamps of the airbox please?
I keep a few as spares for peoples cars I work on sorry :)
-
OK Thanks anyway.
-
Hi. I,m in need of the N/S/R door bump strip x2 to fit my R reg estate and the wife's V reg saloon.
Is this a common thing with them?
Cheers.
-
OK Thanks anyway.
i will have a look for you in the morning ken, i may have four in the shed. :y
-
Thats great thanks, very much apreciated.
-
Hi. I,m in need of the N/S/R door bump strip x2 to fit my R reg estate and the wife's V reg saloon.
Is this a common thing with them?
Cheers.
They done get caught :(
I have them for both the estate and saloon mate :y
-
Hello mate, can you help with these parts:-
Drivers door motor.
Drivers door check strap complete
Auxilliary coolant pump
Front door outer window rubbers, both sides.
Sure there's more bits I need but can't think of them now.
What audio does it have? Do you know if it is compatible with a '99 gls with steering wheel controls?
Steve
-
Hello mate, can you help with these parts:-
Drivers door motor.
Drivers door check strap complete
Auxilliary coolant pump
Front door outer window rubbers, both sides.
Sure there's more bits I need but can't think of them now.
What audio does it have? Do you know if it is compatible with a '99 gls with steering wheel controls?
Steve
I have all the bits you have listed there mate.
I have PM'd you with my number :y
Cheers
Daz
-
Hi,
I'm after a bit of door trim - the plastic clip on bit which you hold when pulling the door closed. I need these for both front doors if you have them? If you're not sure what which bit I'm on about then I can send a pic of what I mean. If you have them, what colour are they?
Thanks,
Rob.
-
Hi,
I'm after a bit of door trim - the plastic clip on bit which you hold when pulling the door closed. I need these for both front doors if you have them? If you're not sure what which bit I'm on about then I can send a pic of what I mean. If you have them, what colour are they?
Thanks,
Rob.
If you mean the bit that is annoying when broken that falls out each time you put the door shut, I do mate :y
-
Hi,
I'm after a bit of door trim - the plastic clip on bit which you hold when pulling the door closed. I need these for both front doors if you have them? If you're not sure what which bit I'm on about then I can send a pic of what I mean. If you have them, what colour are they?
Thanks,
Rob.
They're about £7 or £8 each new from Vauxhall, strangely they're not both the same price ..... :-? :-? :-?
-
Daz
Do you have the wiring that got lost when we replaced the leather seats with my old ones a while back.
By that I mean will the wiring from this car you're breaking now fit my car.
do you remember? my cloth seats had the heated seats and the up and down powered bit and I needed the wiring which went form the seats to the main loom, like a connecting piece, sorry if that's a bit vague but you know me and cars like :-?
-
MID and high level brake light, do you still have these? If so how much to Northern Ireland?
-
Daz
Do you have the wiring that got lost when we replaced the leather seats with my old ones a while back.
By that I mean will the wiring from this car you're breaking now fit my car.
do you remember? my cloth seats had the heated seats and the up and down powered bit and I needed the wiring which went form the seats to the main loom, like a connecting piece, sorry if that's a bit vague but you know me and cars like :-?
These are the same seats as your original ones so the wiring is not what your after mate.
Daz
-
MID and high level brake light, do you still have these? If so how much to Northern Ireland?
The only MID's I have at the minute are the ones with a single grey plug connection.
I think I have an estate high level brake light mate but will check later and PM you :y
Daz
-
Hi Daz,
Have you still got the wheels & tyres? what make are they?
Pete.
-
Hi Daz,
Have you still got the wheels & tyres? what make are they?
Pete.
Hi Pete, Yes I do have the wheels and tyres not advertised them yet.
PM sent :y
-
These are the same seats as your original ones so the wiring is not what your after mate.
Daz[/quote]
Thanks Daz, will you let me know when you get a car with the bits that I need please?
Thanks again
-
Hi do you still have the heater blower speed controller mine has got wet ant dont work correctly. The headlights would be nice if you still have them cheers Andy
-
MID and high level brake light, do you still have these? If so how much to Northern Ireland?
The only MID's I have at the minute are the ones with a single grey plug connection.
I think I have an estate high level brake light mate but will check later and PM you :y
Daz
Any luck with the high level brake light fella?
-
Hi - Do you still have the radio, my CD300 needs replacing. Many Thanks
-
The doors dont have any rust on them. The rear drivers side door bumper strip is damaged at the front edge.
The rear tailgate has some scratches on the top where it looks asthough some ladders have caught it.
It has three brand new tyres on it.
Everything is for sale on this car so let me know if you need anything.
Cheers
Daz :)
(http://i155.photobucket.com/albums/s304/Loo-knee/2-1.jpg)
(http://i155.photobucket.com/albums/s304/Loo-knee/3-1.jpg)
(http://i155.photobucket.com/albums/s304/Loo-knee/4-1.jpg)
(http://i155.photobucket.com/albums/s304/Loo-knee/6.jpg)
I dont know how far youre going with the stripping, but i need the wiring loom from the abs module to wherever it goes intact, if u can do let me know,
kind regards
-
I am after a heater control ecu unit , apparently it is the unit behind the control knobs on the dash.
-
Hi, does it still have the gear selector switch on it??
Mine has gave up on me :(
Cheers,
Ricky
-
Does yours have the same ABS ECU as my 2000 (W) reg 2.5CD Auto Saloon? Mine's got the dreaded ABS/TC/Speedo fault so if yours is the same as mine and works.....?
Also could do with a N/S mirror backshell. The missus keeps arguing with the gatepost! (Wrong colour but a can of paint is only a few bob.)
And the small plastic twist-clips that hold the scuttle to the lower windscreen frame? I lost a couple when I had the scuttle off to do an HBV change a few weeks ago.
Cheers,
Gaz
-
would this one have a headlight level sensor on it
hi there is engine any good
whats the miles
how much
-
I am after a heater control ecu unit , apparently it is the unit behind the control knobs on the dash.
I do have one of these mate PM sent :y
-
Hi, does it still have the gear selector switch on it??
Mine has gave up on me :(
Cheers,
Ricky
The gear selector went with the gearbox mate :y
-
Does yours have the same ABS ECU as my 2000 (W) reg 2.5CD Auto Saloon? Mine's got the dreaded ABS/TC/Speedo fault so if yours is the same as mine and works.....?
Also could do with a N/S mirror backshell. The missus keeps arguing with the gatepost! (Wrong colour but a can of paint is only a few bob.)
And the small plastic twist-clips that hold the scuttle to the lower windscreen frame? I lost a couple when I had the scuttle off to do an HBV change a few weeks ago.
Cheers,
Gaz
Hi Gaz, the only ECU I have is off a 3.0 so I think I am right in saying that it will fit etc but will need a chat to a tech2.
I do have the other bits you need too :y
-
would this one have a headlight level sensor on it
hi there is engine any good
whats the miles
how much
The engine has been sold mate sorry :(
-
MID and high level brake light, do you still have these? If so how much to Northern Ireland?
The only MID's I have at the minute are the ones with a single grey plug connection.
I think I have an estate high level brake light mate but will check later and PM you :y
Daz
Any luck with the high level brake light fella?
I PM'd you a while ago mate saying that it was broken :(
-
Does yours have the same ABS ECU as my 2000 (W) reg 2.5CD Auto Saloon? Mine's got the dreaded ABS/TC/Speedo fault so if yours is the same as mine and works.....?
Also could do with a N/S mirror backshell. The missus keeps arguing with the gatepost! (Wrong colour but a can of paint is only a few bob.)
And the small plastic twist-clips that hold the scuttle to the lower windscreen frame? I lost a couple when I had the scuttle off to do an HBV change a few weeks ago.
Cheers,
Gaz
Hi Gaz, the only ECU I have is off a 3.0 so I think I am right in saying that it will fit etc but will need a chat to a tech2.
I do have the other bits you need too :y
How much do you want for the N/S mirror backshell and a couple of the scuttle clips?? You wanna mail me at gary_b_cooper@hotmail.co.uk? I've got this thread set to notify me but it never does for some reason!
I'll pass on the ecu thanks - I'm trying to avoid having to go the Tech2 route if at all poss.