Omega Owners Forum

Trading Area => Car Parts, bits For Sale & Wanted => Topic started by: Ratty on 27 February 2010, 22:00:31

Title: WANTED: interior handle insert
Post by: Ratty on 27 February 2010, 22:00:31

Hi, has anyone got an insert for the interior handle in brown/chocolate or whatever the other colour is that goes with the beige trim   :-[

I've circled the bit I need in the diagram below.

(http://i4.photobucket.com/albums/y149/ratsalad/Public/Handle.jpg)

Thanks.

John.

Title: Re: WANTED: interior handle insert
Post by: Welung666 on 27 February 2010, 22:14:59

They are a pain! They'll break if you look at 'em wrong >:(

I'll have a dig John, think I got a couple here somewhere :y

Title: Re: WANTED: interior handle insert
Post by: Ratty on 27 February 2010, 22:52:38

cheers Lee, I replaced that broken exterior handle today and that bit of trim just fell off lol.

EDIT: I should add that the bit I need is from the drivers door

I also need a puddle/courtesy light ;)

Title: Re: WANTED: interior handle insert
Post by: Dany on 28 February 2010, 00:54:49

I don't have this insert and excuse me for the question but...where do you find this kind of diagrams?

Title: Re: WANTED: interior handle insert
Post by: Ratty on 28 February 2010, 01:34:13

I got it from a friend who has access to an EPC  :)

Title: Re: WANTED: interior handle insert
Post by: Jimbob on 28 February 2010, 08:36:00

[movedhere] Test Zone [move by] Jimbob.

Title: Re: WANTED: interior handle insert
Post by: Humpy on 02 March 2010, 13:29:13

As above, I need one in black for a drivers door for the bosses car (SWMBO)  ;)

Humpy

Title: Re: WANTED: interior handle insert
Post by: Welung666 on 02 March 2010, 13:34:07

John, I've had a good dig for the grab insert but can't find it anywhere. I'll stick you a puddle light in the post though ;) :y

Title: Re: WANTED: interior handle insert
Post by: unlucky alf on 02 March 2010, 13:42:52

just get one in any colour because you can swap the outer cover off these things, :y :y

Title: Re: WANTED: interior handle insert
Post by: Andy B on 02 March 2010, 13:47:33

They're not too expensive new (£15/£16 for the pair IIRC), bizarely though left & right are different prices  :-?

Title: Re: WANTED: interior handle insert
Post by: Ratty on 02 March 2010, 14:50:29

Quote

John, I've had a good dig for the grab insert but can't find it anywhere. I'll stick you a puddle light in the post though ;) :y

Cheers Lee, PM me how much I owe ya :y :)

Title: Re: WANTED: interior handle insert
Post by: Ratty on 02 March 2010, 14:56:42

Quote

just get one in any colour because you can swap the outer cover off these things, :y :y

Ah ha, thanks for the info.... next question, has anyone got one lying around? ;) :y

Title: Re: WANTED: interior handle insert
Post by: Ratty on 02 March 2010, 14:58:59

Quote

They're not too expensive new (£15/£16 for the pair IIRC), bizarely though left & right are different prices  :-?

Money is a bit on the short side atm, so I'm hoping a kind soul on here will take pity on this skint beggar and have one nice and cheap.

but if all else fails I'll get a new one. thanks :)

Title: Re: WANTED: interior handle insert
Post by: Ratty on 04 March 2010, 23:59:22

Still need a handle insert as above, it appears it doesn't have to be brown, as the cover is removable? (not checked this though)


@welung666
did you get the puddle light in the post Lee? and how much do
I owe ya for it?

Thanks

Title: Re: WANTED: interior handle insert
Post by: Welung666 on 05 March 2010, 07:53:03

Quote

Still need a handle insert as above, it appears it doesn't have to be brown, as the cover is removable? (not checked this though)


@welung666
did you get the puddle light in the post Lee? and how much do
I owe ya for it?


Thanks

Going out today, I'd run out of jiffy bags ;D ;D

Title: Re: WANTED: interior handle insert
Post by: Ratty on 09 March 2010, 07:11:20

Quote

Hi, has anyone got an insert for the interior handle in brown/chocolate or whatever the other colour is that goes with the beige trim   :-[

I've circled the bit I need in the diagram below.



Thanks.

John.

(http://i4.photobucket.com/albums/y149/ratsalad/Public/Handle.jpg)


Still looking for one :( anyone? it doesn't have to be brown any colour would do.

thanks