Omega Owners Forum

Trading Area => Car Parts, bits For Sale & Wanted => Topic started by: Ploppy on 30 April 2010, 18:47:15

Title: Wanted....for a facelift saloon ...please move
Post by: Ploppy on 30 April 2010, 18:47:15
After the 2 little screws that hold the centre arm rest and rear cigarette lighter together...


or should I say the two screws which fit either side of the rear cigarette lighter ... if that makes sense ??

Thanks Ploppy

Title: Re: Wanted....for a facelift saloon ...please move
Post by: Jimbob on 30 April 2010, 18:50:58
[movedhere] Test Zone [move by] Jimbob.
Title: Re: Wanted....for a facelift saloon ...please move
Post by: TheBoy on 30 April 2010, 21:50:06
If only you'd said 3 days ago before I posted that stuff ;)
Title: Re: Wanted....for a facelift saloon ...please move
Post by: Ploppy on 30 April 2010, 23:37:11
Hi TB..

um  just thought about it when I was looking at the new trim...

well if you have them would be happy to get them from you again>>>

Ploppy ::) :D
Title: Re: Wanted....for a facelift saloon ...please move
Post by: Ploppy on 02 May 2010, 10:23:41
Please can someone help??
 :'( :'( :'( :'(
Title: Re: Wanted....for a facelift saloon ...please move
Post by: TheBoy on 02 May 2010, 11:33:16
 :-[

I have a box of all the screws, but no idea which one it is  :-[

If someone has a pic ;)
Title: Re: Wanted....for a facelift saloon ...please move
Post by: Ploppy on 03 May 2010, 21:13:13
i dont have a picture of the 2 screws that go either side...sorry :'(

as Ive never had the screws.... :'(
Title: Re: Wanted....for a facelift saloon ...please move
Post by: TheBoy on 03 May 2010, 21:20:17
can someone with a facelift take one out and photo please?
Title: Re: Wanted....for a facelift saloon ...please move
Post by: Andy Pont on 03 May 2010, 23:20:16
Quote
can someone with a facelift take one out and photo please?

Sorry, I have only just seen this post. I will be happy to take one out to measure and photograph tomorrow night.
Title: Re: Wanted....for a facelift saloon ...please move
Post by: Ploppy on 03 May 2010, 23:37:32
Thanks Andy and TB ...

hopefully you can help

Regards

Ploppy
 [smiley=dankk2.gif] [smiley=2vrolijk_08.gif]
Title: Re: Wanted....for a facelift saloon ...please move
Post by: TheBoy on 04 May 2010, 18:45:32
A photo would be great - I have a box of screws containing all screws used on the interior.  I know this is a non standard (for Omega) bolt, but can't remember what it looks like
Title: Re: Wanted....for a facelift saloon ...please move
Post by: Andy Pont on 04 May 2010, 18:54:04
Quote
Quote
can someone with a facelift take one out and photo please?

Sorry, I have only just seen this post. I will be happy to take one out to measure and photograph tomorrow night.

Its a torx head. As you will see it is about 37mm jong by 6mm dia.

(http://i144.photobucket.com/albums/r190/andypont/Omega/Screw.jpg)

Hope that helps.
Title: Re: Wanted....for a facelift saloon ...please move
Post by: TheBoy on 04 May 2010, 19:19:27
I thought it was silver, unless we are talking about different screws :o
Title: Re: Wanted....for a facelift saloon ...please move
Post by: Andy Pont on 04 May 2010, 20:35:46
Quote
I thought it was silver, unless we are talking about different screws :o

Thats one of the pivot screws for the arm rest.  It was the only screw I could see anywhere near the rear cigarette lighter. Got the rear panel with vents and lighter, and one of these screws goes in from either side (about level with the seats when right back). If not the right ones I would be happy to investigate firther if Ploppy can point me in the right direction.....  :-/
Title: Re: Wanted....for a facelift saloon ...please move
Post by: TheBoy on 04 May 2010, 20:37:26
I thought he meant the screws that go into the console at back (may have to pull seats forward to see  :-/
Title: Re: Wanted....for a facelift saloon ...please move
Post by: Andy Pont on 04 May 2010, 20:41:25
Quote
I thought he meant the screws that go into the console at back (may have to pull seats forward to see  :-/

Yep, we are talking the same screws ..... just different colours! ;D
Title: Re: Wanted....for a facelift saloon ...please move
Post by: TheBoy on 04 May 2010, 20:45:11
Quote
Quote
I thought he meant the screws that go into the console at back (may have to pull seats forward to see  :-/

Yep, we are talking the same screws ..... just different colours! ;D
We'll let Ploppy pop up a photo, rather than 2nd guess him :)
Title: Re: Wanted....for a facelift saloon ...please move
Post by: Andy Pont on 04 May 2010, 20:46:37
Quote
Quote
Quote
I thought he meant the screws that go into the console at back (may have to pull seats forward to see  :-/

Yep, we are talking the same screws ..... just different colours! ;D
We'll let Ploppy pop up a photo, rather than 2nd guess him :)

Sounds good - I would take a photo of where that one came from but its lashing down! lol :D
Title: Re: Wanted....for a facelift saloon ...please move
Post by: Andy Pont on 04 May 2010, 21:13:46
This is where that one came from.

(http://i144.photobucket.com/albums/r190/andypont/Omega/screw2.jpg)
Title: Re: Wanted....for a facelift saloon ...please move
Post by: TheBoy on 04 May 2010, 21:28:05
thats the one i was thinking of - mine are silver ;D
Title: Re: Wanted....for a facelift saloon ...please move
Post by: Andy Pont on 04 May 2010, 21:32:41
Quote
thats the one i was thinking of - mine are silver ;D

If the rest of my interior is anything to go by, those probably were once!!  :D
Title: Re: Wanted....for a facelift saloon ...please move
Post by: Ploppy on 05 May 2010, 00:54:43
HI Andy and TB

Yes they are the 2 screws Im after !!!

You two are brilliant !!

Ploppy :y :y :y :y
Title: Re: Wanted....for a facelift saloon ...please move
Post by: TheBoy on 05 May 2010, 21:15:03
I shall have a root about over the weekend
Title: Re: Wanted....for a facelift saloon ...please move
Post by: Ploppy on 05 May 2010, 22:22:14
Thanks TB

you are a star !!

Ploppy  :D :y
Title: Re: Wanted....for a facelift saloon ...please move
Post by: Ploppy on 11 May 2010, 22:10:29
Any joy TB??
 :D