Omega Owners Forum

Trading Area => Car Parts, bits For Sale & Wanted => Topic started by: Bumbazor on 15 August 2010, 09:15:59

Title: Wanted 2.5 V6 engine (X25XE)
Post by: Bumbazor on 15 August 2010, 09:15:59

I'll consider most conditions if failure has not occurred. Eg, missing auxiliary parts, needs new cambelt, etc, but must not have any oil or coolant leaks.

Ideally 120000 miles or under

Would prefer it to be delivered but I might be able collect if it is close enough.

Cash waiting

Title: Re: Wanted 2.5 V6 engine (X25XE)
Post by: Darth Loo-knee on 15 August 2010, 09:35:18

Why not drop a 3.0 in? I have one here that you could have cheapish not to far from you either.
 :y

Title: Re: Wanted 2.5 V6 engine (X25XE)
Post by: Bumbazor on 15 August 2010, 09:40:41

I thought about that but I would need an AR35, and ECU, all adds to the cost. But, depending on the cost, I would consider it.

Would you be wanting me to collect?

Title: Re: Wanted 2.5 V6 engine (X25XE)
Post by: Brikhead on 15 August 2010, 11:13:07

deleted.....  ::)

Title: Re: Wanted 2.5 V6 engine (X25XE)
Post by: Bumbazor on 15 August 2010, 11:44:01

That's not bad Brikhead, but a little more than I wanted to pay although I will bear it in mind if I'm not sorted by next weekend.

Title: Re: Wanted 2.5 V6 engine (X25XE)
Post by: nell77 on 15 August 2010, 16:51:07

I have the 3.0 ecu / wiring loom / transponder / and barrel pick up here if interested

Title: Re: Wanted 2.5 V6 engine (X25XE)
Post by: 377 on 15 August 2010, 18:33:20

contents deleted to conform with forum guidelines.

http://www.omegaowners.com/forum/YaBB.pl?virboard=PartsSale;num=1209458172

Title: Re: Wanted 2.5 V6 engine (X25XE)
Post by: Bumbazor on 15 August 2010, 18:41:50

Richard, I have sent you a PM.

Title: Re: Wanted 2.5 V6 engine (X25XE)
Post by: Bumbazor on 15 August 2010, 19:27:34

I'm sure the 2.5 and 3.0 ECUs are not interchangeable, and the 3.0 plenum is slightly longer, so probably has different air flow. I would love to put a 3.0 in but cost is a big factor now.