Omega Owners Forum

Trading Area => Car Parts, bits For Sale & Wanted => Topic started by: Darth Loo-knee on 29 September 2010, 09:22:56

Title: Breaking V reg 3.0 MV6 Manual
Post by: Darth Loo-knee on 29 September 2010, 09:22:56
No pictures taken yet but will put some on here later today.

Mint Leather MV6 seats, leather door cards included = £200

Irmscher Wheels, dont seem to have any wobbles but could do with a refurb. = £120

ABS ECU = £40 delivered

Manual Gearbox = SOLD

The usual parts for sale if anyone is interested :y

Title: Re: Breaking V reg 3.0 MV6 Manual
Post by: Broomies Mate on 29 September 2010, 20:08:08
Wheels Wheels Wheels!

Can you get some pics of them for me please, and what sort of boots are they wearing, if any.

Regards

BM  :y
Title: Re: Breaking V reg 3.0 MV6 Manual
Post by: Sixstring on 29 September 2010, 20:14:51
You can't have them.

You'll only abuse them.................. ;D ;D


Got those tyres going spare now??

You know, the ones you don't like..............
Title: Re: Breaking V reg 3.0 MV6 Manual
Post by: Broomies Mate on 29 September 2010, 20:22:09
Quote
You can't have them.

You'll only abuse them.................. ;D ;D


Got those tyres going spare now??

You know, the ones you don't like..............

Depends on the damage to these Wheels.  My shite tyres are still on the car as I am having other cosmetic and more importantly a lot of servicing done while I still have a bank statement with black numbers on it  ;D

Anyway, stop messing up DLK's thread, of he'll arrive on your driveway in the DeathStar.  :P
Title: Re: Breaking V reg 3.0 MV6 Manual
Post by: Matchless on 30 September 2010, 13:53:16
PFL /FL?
Colour?
Please let it be Polar Sea Blue with an immaculate bonnet.
Title: Re: Breaking V reg 3.0 MV6 Manual
Post by: Darth Loo-knee on 01 October 2010, 21:19:32
Sorry Pete its Silver Z147 :y

A few pictures  :y

All tyres have about 5mm on them :y

(http://i155.photobucket.com/albums/s304/Loo-knee/1285851469158.jpg)

(http://i155.photobucket.com/albums/s304/Loo-knee/1285851455967.jpg)

(http://i155.photobucket.com/albums/s304/Loo-knee/1285851447967.jpg)

(http://i155.photobucket.com/albums/s304/Loo-knee/1285851422959.jpg)

(http://i155.photobucket.com/albums/s304/Loo-knee/1285851383370.jpg)

(http://i155.photobucket.com/albums/s304/Loo-knee/1285851402464.jpg)

(http://i155.photobucket.com/albums/s304/Loo-knee/1285851513358.jpg)

(http://i155.photobucket.com/albums/s304/Loo-knee/1285851504875.jpg)

Title: Re: Breaking V reg 3.0 MV6 Manual
Post by: albitz on 01 October 2010, 21:25:28
Possibly interested in offside doors. Delivery might be costly/awkward for items so big though ? :-/
Title: Re: Breaking V reg 3.0 MV6 Manual
Post by: Darth Loo-knee on 01 October 2010, 22:42:37
Quote
Possibly interested in offside doors. Delivery might be costly/awkward for items so big though ? :-/


How many times have I heard you say this same thing ;D
Title: Re: Breaking V reg 3.0 MV6 Manual
Post by: albitz on 02 October 2010, 00:05:58
Never, as far as I recall.As far as I can remember , everything I have enquired about buying from you I have ended up buying......just wondering if it would cost a lot to get them here ? :-/
Title: Re: Breaking V reg 3.0 MV6 Manual
Post by: Darth Loo-knee on 02 October 2010, 08:42:41
Quote
Never, as far as I recall.As far as I can remember , everything I have enquired about buying from you I have ended up buying......just wondering if it would cost a lot to get them here ? :-/

Yeah right  :D ;D ;D ;D
Title: Re: Breaking V reg 3.0 MV6 Manual
Post by: albitz on 02 October 2010, 09:27:03
I will rephrase the question in a more straightforward way, in the hope of a sensible answer. ::)
Are the o/side doors in good nick ?(particularily need a rear one)
If so, do you have a price - delivered please ? :-/



Thinking about it, mines a facelift and this probably isnt. So the doors might not be suitable anyway ? :-/
Title: Re: Breaking V reg 3.0 MV6 Manual
Post by: Darth Loo-knee on 02 October 2010, 12:51:53
Quote
I will rephrase the question in a more straightforward way, in the hope of a sensible answer. ::)
Are the o/side doors in good nick ?(particularily need a rear one)
If so, do you have a price - delivered please ? :-/



Thinking about it, mines a facelift and this probably isnt. So the doors might not be suitable anyway ? :-/


Its a mini facelift mate  :-[

I will check the condition of the doors mate, I maybe passing near you so could perhaps throw them in for a brew ;)
Title: Re: Breaking V reg 3.0 MV6 Manual
Post by: albitz on 02 October 2010, 13:24:35
Quote
Quote
I will rephrase the question in a more straightforward way, in the hope of a sensible answer. ::)
Are the o/side doors in good nick ?(particularily need a rear one)
If so, do you have a price - delivered please ? :-/



Thinking about it, mines a facelift and this probably isnt. So the doors might not be suitable anyway ? :-/


Its a mini facelift mate  :-[

I will check the condition of the doors mate, I maybe passing near you so could perhaps throw them in for a brew ;)

In which case iirc it will have the black rubbing strips rather than the colour coded ones. So probably no good, unless the strips can be swapped over - dont know what you could use to stick the silver ones on with. :-/
Feel free to pop in for a brew though if your down this way. :y
Title: Re: Breaking V reg 3.0 MV6 Manual
Post by: omegod on 02 October 2010, 13:55:31
Quote
Quote
Quote
I will rephrase the question in a more straightforward way, in the hope of a sensible answer. ::)
Are the o/side doors in good nick ?(particularily need a rear one)
If so, do you have a price - delivered please ? :-/



Thinking about it, mines a facelift and this probably isnt. So the doors might not be suitable anyway ? :-/


Its a mini facelift mate  :-[

I will check the condition of the doors mate, I maybe passing near you so could perhaps throw them in for a brew ;)

In which case iirc it will have the black rubbing strips rather than the colour coded ones. So probably no good, unless the strips can be swapped over - dont know what you could use to stick the silver ones on with. :-/
Feel free to pop in for a brew though if your down this way. :y

Just a case of drilling two holes to fit them, I think someone put the measurements on the maintenance section
Title: Re: Breaking V reg 3.0 MV6 Manual
Post by: albitz on 02 October 2010, 14:08:20
That sounds hopeful. Willtry and find the thread you mention. Thanks. :y
Title: Re: Breaking V reg 3.0 MV6 Manual
Post by: 2woody on 02 October 2010, 21:48:14
interested in the rear springs
Title: Re: Breaking V reg 3.0 MV6 Manual
Post by: Darth Loo-knee on 02 October 2010, 21:52:00
Quote
interested in the rear springs


I will check them first on Monday and let you know :y
Title: Re: Breaking V reg 3.0 MV6 Manual
Post by: albitz on 03 October 2010, 08:44:21
Quote
Quote
Quote
Quote
I will rephrase the question in a more straightforward way, in the hope of a sensible answer. ::)
Are the o/side doors in good nick ?(particularily need a rear one)
If so, do you have a price - delivered please ? :-/



Thinking about it, mines a facelift and this probably isnt. So the doors might not be suitable anyway ? :-/


Its a mini facelift mate  :-[

I will check the condition of the doors mate, I maybe passing near you so could perhaps throw them in for a brew ;)

In which case iirc it will have the black rubbing strips rather than the colour coded ones. So probably no good, unless the strips can be swapped over - dont know what you could use to stick the silver ones on with. :-/
Feel free to pop in for a brew though if your down this way. :y

Just a case of drilling two holes to fit them, I think someone put the measurements on the maintenance section
Cant find it. Anyone know where it is? :-/
Title: Re: Breaking V reg 3.0 MV6 Manual
Post by: Darth Loo-knee on 03 October 2010, 10:30:19
Engine is now Sold.
Thanks 
 :y
Title: Re: Breaking V reg 3.0 MV6 Manual
Post by: Jim on 03 October 2010, 18:10:17
I know the gearbox has gone but is the pedal box and gear linkage/gear stick and prop shaft still avaliable??
Title: Re: Breaking V reg 3.0 MV6 Manual
Post by: Kneepad on 03 October 2010, 18:59:40
Quote



Thinking about it,

Will he? wont he?  Will he? wont he?   ;D ;D ;D
Title: Re: Breaking V reg 3.0 MV6 Manual
Post by: Darth Loo-knee on 04 October 2010, 18:48:32
Quote
I know the gearbox has gone but is the pedal box and gear linkage/gear stick and prop shaft still avaliable??

The only thing left on your wanted list Jim is the Propshaft :y
Title: Re: Breaking V reg 3.0 MV6 Manual
Post by: Darth Loo-knee on 20 October 2010, 21:21:41
These black leather mv6 seats are for sale again as the person that told me they wanted them now know longer does.
They are mint so if your interested please let me know.
Cheers
 :y
Title: Re: Breaking V reg 3.0 MV6 Manual
Post by: markfree on 21 October 2010, 12:18:54
Looking for a coolant expansion tank with level sensor for my facelift (presuming it will fit), if you have one can you check it's not got cracks around the neck (which mine has).
 :y
Title: Re: Breaking V reg 3.0 MV6 Manual
Post by: 2woody on 21 October 2010, 16:24:09
any news on the rear springs ?
Title: Re: Breaking V reg 3.0 MV6 Manual
Post by: Darth Loo-knee on 21 October 2010, 20:42:32
Quote
any news on the rear springs ?

Would you believe One looks new and the others tail is missing :-?
Title: Re: Breaking V reg 3.0 MV6 Manual
Post by: Darth Loo-knee on 21 October 2010, 20:43:37
Quote
Looking for a coolant expansion tank with level sensor for my facelift (presuming it will fit), if you have one can you check it's not got cracks around the neck (which mine has).
 :y

I do have one yes :y
A new one from Vx is only £30 though mate :y
Title: Re: Breaking V reg 3.0 MV6 Manual
Post by: markfree on 21 October 2010, 22:49:55
Quote
Quote
Looking for a coolant expansion tank with level sensor for my facelift (presuming it will fit), if you have one can you check it's not got cracks around the neck (which mine has).
 :y

I do have one yes :y
A new one from Vx is only £30 though mate :y

Didn't realise they were so cheap - might as well get one from dealers - thanks anyway :y
Title: Re: Breaking V reg 3.0 MV6 Manual
Post by: Entwood on 23 October 2010, 23:10:40
Daz...  does this one have the long neck on the washer bottle ?? If so i'd be interested in the neck ... like to modify mine same as Broocie has done to his ..  :)