Omega Owners Forum

Trading Area => Car Parts, bits For Sale & Wanted => Topic started by: amba on 19 March 2011, 19:57:00

Title: Wanted.M/Facelift
Post by: amba on 19 March 2011, 19:57:00

I need the carbon cannister purge valve for m/f lift .

When trying to remove the rubber pipe from the valve to the plenum top breather I managed to snap the mounting nipple so will need replacing .

Pm if can supply please.

Title: Re: Wanted.M/Facelift
Post by: I_want_an_Omega on 19 March 2011, 22:19:05

I dont have one - but have replaced one - a pig of a job I can tell you - good luck  :-/

Title: Re: Wanted.M/Facelift
Post by: amba on 20 March 2011, 09:07:21

Thanks for words of inspiration,Rob.

I had intended get bits ready for my attempt at o/s exhaust manifold gasket in the Spring,so had hoped it would be quite straight forward with all the top bits removed to get at the coolant transfer pipe.

Still looking for one if anybody has a breaker.

Title: Re: Wanted.M/Facelift
Post by: I_want_an_Omega on 20 March 2011, 13:39:33

Quote

Thanks for words of inspiration,Rob.

I had intended get bits ready for my attempt at o/s exhaust manifold gasket in the Spring,so had hoped it would be quite straight forward with all the top bits removed to get at the coolant transfer pipe.

Still looking for one if anybody has a breaker.

MUCH easier in that case then

Title: Re: Wanted.M/Facelift
Post by: MutantCav on 20 March 2011, 13:45:55

I probably have one...but not sure what exactly you are talking about...do you have a picture??

Title: Re: Wanted.M/Facelift
Post by: amba on 20 March 2011, 21:14:59

Chris....I will drop you a pm and explain...haven,t mastered the art of adding pictures via forum so only way would be via an email addy.