Omega Owners Forum

Trading Area => Car Parts, bits For Sale & Wanted => Topic started by: VXL V6 on 29 April 2011, 09:08:45

Title: WANTED - Prefacelift CD Changer looms
Post by: VXL V6 on 29 April 2011, 09:08:45
As above, required for a source of shielded cable for other projects!

Cheap as possible please!

Many thanks
Title: Re: WANTED - Prefacelift CD Changer looms
Post by: Dodger on 29 April 2011, 21:48:47
Assume that you mean the loom that went from the drivers side footwell to the boot, with the small black molex 12 way on one end and the large grey clip on multiplug on the other??  :-?

If so, I think I have one lying in the shed..
(It came with the CCR600/CDC2 that I bought for my PFL estate, only to find that mine being a GLS, didn't have the appropriate loom connector in the footwell!!!
ended up buying a special lead to connect it all up..... :-[ )

If it's what you are after, will look it out and sort out something for you..

Dodger.. :y
Title: Re: WANTED - Prefacelift CD Changer looms
Post by: VXL V6 on 29 April 2011, 22:56:49
Quote
Assume that you mean the loom that went from the drivers side footwell to the boot, with the small black molex 12 way on one end and the large grey clip on multiplug on the other??  :-?

If so, I think I have one lying in the shed..
(It came with the CCR600/CDC2 that I bought for my PFL estate, only to find that mine being a GLS, didn't have the appropriate loom connector in the footwell!!!
ended up buying a special lead to connect it all up..... :-[ )

If it's what you are after, will look it out and sort out something for you..

Dodger.. :y

 :y

Many thanks Dodger
Title: Re: WANTED - Prefacelift CD Changer looms
Post by: Dodger on 01 May 2011, 20:07:53
You have PM.. :y
Title: Re: WANTED - Prefacelift CD Changer looms
Post by: lee4206 on 02 May 2011, 20:18:28
I have one if still needed.
Pm me a offer.
Lee
P.s. its from a mini facelift if that makes any difference.
Title: Re: WANTED - Prefacelift CD Changer looms
Post by: VXL V6 on 06 May 2011, 21:46:33
Cheers both, looms here when I got back tonight. Most appreciated, will help me finish off a little wiring project for a forum member.  :y