Omega Owners Forum
Trading Area => Car Parts, bits For Sale & Wanted => Topic started by: pedroMV6 on 23 May 2011, 18:59:38
-
The truck isn't gonna get finished for various reasons, but mainly spiralling fuel and insurance costs. Plus the fact that The Louts doesn't like living outside!
So, a few Omega parts are for sale.
Brand new unused Facelift Irmscher front bumper, mint condition (obviously wants painting) c/w fittings, foglights, etc - still in it's packaging. :o
Finding another would be a bit on the 'difficult' side..............
£500
Then there's a set of pre-facelift almost mint Irmscher Soft Star 17" wheels plus mid-price tyres only run for a couple of hundred miles then taken off road - £300
Facelift Irmscher estate rear spoiler in green (which green, I don't really know, but it's kinda dark mica metallic) still on a decent tailgate. £40 ovno
Bose kit inc phone, speakers, looms, head unit etc - £100 ono. Buyer to remove from dash and front doors.
Removable towbar and twin electrics - £75
Rest of truck can go in one for £250 - 2.5 V6 auto, some interior electrics don't work, but AC did work fine. Some vacuum hoses on the engine are FUBAR. Needs gaskets and breathers doing.
Auto box works well.
Rear wheel bearings done 3/4 years ago.
ABS module replaced around 15k miles back.
Dispack replaced around the same time.
Front springs, all four discs and pads replaced about 20k miles back.
Facelift Elite wheels (need refurb) and shot tyres included.
More details please PM me, pics on request.
-
Bumper
(http://i11.photobucket.com/albums/a196/Pedropix/bla3.jpg)
Wheels & Tyres
(http://i11.photobucket.com/albums/a196/Pedropix/MV6%20Wheels/OSR.jpg)
(http://i11.photobucket.com/albums/a196/Pedropix/MV6%20Wheels/OSRTread.jpg)
(http://i11.photobucket.com/albums/a196/Pedropix/MV6%20Wheels/OSF.jpg)
(http://i11.photobucket.com/albums/a196/Pedropix/MV6%20Wheels/OSFTread.jpg)
(http://i11.photobucket.com/albums/a196/Pedropix/MV6%20Wheels/NSR.jpg)
(http://i11.photobucket.com/albums/a196/Pedropix/MV6%20Wheels/NSRTread.jpg)
(http://i11.photobucket.com/albums/a196/Pedropix/MV6%20Wheels/NSFTread.jpg)
(http://i11.photobucket.com/albums/a196/Pedropix/MV6%20Wheels/NSF.jpg)
The pics were taken last winter, and only moved twenty feet (back into the garage) since then.
Tyres are 2x Admiral SP712 with 5-6mm tread and 2x Dunlop SP Sport 9090 with 4-5 mm tread.
All tyres are 235/45 ZR 17 in size.
-
Which Bose head unit is in the car Pedro?
-
Which Bose head unit is in the car Pedro?
CCRT 2008 - tape, radio, 4 x cd cartridge player and phone.
-
Thought you had a buyer for the removable towbar? :-? :-/
Obviously not, so I'm still happy to purchase. Please advise postage. :y
-
Thought you had a buyer for the removable towbar? :-? :-/
Obviously not, so I'm still happy to purchase. Please advise postage. :y
Yeah, he bailed when he sold my old MV6. ::)
To be honest, it would probably be bloody expensive - the ball itself weighs a fair bit, then there's the steel work to throw into the equation.
Also it's a matter of having time to remove things that bothers me - I have alot on, but if I can get an hour or so at the weekend, I'll get it off and weigh it up. Can't promise owt, mind.......
-
Thought you had a buyer for the removable towbar? :-? :-/
Obviously not, so I'm still happy to purchase. Please advise postage. :y
Yeah, he bailed when he sold my old MV6. ::)
To be honest, it would probably be bloody expensive - the ball itself weighs a fair bit, then there's the steel work to throw into the equation.
Also it's a matter of having time to remove things that bothers me - I have alot on, but if I can get an hour or so at the weekend, I'll get it off and weigh it up. Can't promise owt, mind.......
I will be at the Lakes meet in the next few weeks and would happily take in a trip to your good self to uplift the bar and wiring complete, if you are in a position to remove it meantime?
-
Thought you had a buyer for the removable towbar? :-? :-/
Obviously not, so I'm still happy to purchase. Please advise postage. :y
I've just bought a fixed one from Witter and it's in excess of 20Kgs ;) ;)
Anyway... If you want LPG on the Bonny Gold Beast you might want to stick with a Flange type tow bar to mount the filler on ;) ;)
-
Thought you had a buyer for the removable towbar? :-? :-/
Obviously not, so I'm still happy to purchase. Please advise postage. :y
Yeah, he bailed when he sold my old MV6. ::)
To be honest, it would probably be bloody expensive - the ball itself weighs a fair bit, then there's the steel work to throw into the equation.
Also it's a matter of having time to remove things that bothers me - I have alot on, but if I can get an hour or so at the weekend, I'll get it off and weigh it up. Can't promise owt, mind.......
I will be at the Lakes meet in the next few weeks and would happily take in a trip to your good self to uplift the bar and wiring complete, if you are in a position to remove it meantime?
When is the Lakes meet? I'm a fair old way from there to be honest!
-
When is the Lakes meet? I'm a fair old way from there to be honest!
So am I! ;D
Meet is circa 8/9th July at Keswick. I'm North of Edinburgh so, to collect from you then upto the meet, well, its only another few hours, TBH.... ;D
-
....... If you want LPG on the Bonny Gold Beast you might want to stick with a Flange type tow bar to mount the filler on ;) ;)
I'm remembering :y (but wanting to keep options open....) ;)
-
....... If you want LPG on the Bonny Gold Beast you might want to stick with a Flange type tow bar to mount the filler on ;) ;)
I'm remembering :y (but wanting to keep options open....) ;)
Hopefully have some more pictures for you next week ;)
-
Thought you had a buyer for the removable towbar? :-? :-/
Obviously not, so I'm still happy to purchase. Please advise postage. :y
Yeah, he bailed when he sold my old MV6. ::)
To be honest, it would probably be bloody expensive - the ball itself weighs a fair bit, then there's the steel work to throw into the equation.
Also it's a matter of having time to remove things that bothers me - I have alot on, but if I can get an hour or so at the weekend, I'll get it off and weigh it up. Can't promise owt, mind.......
I will be at the Lakes meet in the next few weeks and would happily take in a trip to your good self to uplift the bar and wiring complete, if you are in a position to remove it meantime?
H21 I'm hoping to make it to the lakes and I live a lot closer to pedroMV6 if you want me to bring it along I will
-
Thought you had a buyer for the removable towbar? :-? :-/
Obviously not, so I'm still happy to purchase. Please advise postage. :y
Yeah, he bailed when he sold my old MV6. ::)
To be honest, it would probably be bloody expensive - the ball itself weighs a fair bit, then there's the steel work to throw into the equation.
Also it's a matter of having time to remove things that bothers me - I have alot on, but if I can get an hour or so at the weekend, I'll get it off and weigh it up. Can't promise owt, mind.......
I will be at the Lakes meet in the next few weeks and would happily take in a trip to your good self to uplift the bar and wiring complete, if you are in a position to remove it meantime?
H21 I'm hoping to make it to the lakes and I live a lot closer to pedroMV6 if you want me to bring it along I will
Great idea!
If it's a definite, I'll get it off this weekend - with a bit of luck........
-
Consider it a definite. :y Can sort out the logistics of uplift after removal. I also travel up and down the country regularly, albeit without any known timetable, week to week. ;) :y
-
Consider it a definite. :y Can sort out the logistics of uplift after removal. I also travel up and down the country regularly, albeit without any known timetable, week to week. ;) :y
Cool, I shall have it off the car for you on Saturday. :y
-
Maybe tomorrow! ::)
-
Thought you had a buyer for the removable towbar? :-? :-/
Obviously not, so I'm still happy to purchase. Please advise postage. :y
Yeah, he bailed when he sold my old MV6. ::)
To be honest, it would probably be bloody expensive - the ball itself weighs a fair bit, then there's the steel work to throw into the equation.
Also it's a matter of having time to remove things that bothers me - I have alot on, but if I can get an hour or so at the weekend, I'll get it off and weigh it up. Can't promise owt, mind.......
I will be at the Lakes meet in the next few weeks and would happily take in a trip to your good self to uplift the bar and wiring complete, if you are in a position to remove it meantime?
H21 I'm hoping to make it to the lakes and I live a lot closer to pedroMV6 if you want me to bring it along I will
When would you be thinking of popping in, Mr. Dad?
-
Back to the top! :D
-
extract from the rules
No thread bumping (posting on a thread, purely to get it to back to top of the list).
>:(
-
Why ever not? :-/
No worse than someone who hasn't contributed to the forum with 250 posts and can still stick for sale ads up through the back door. >:( >:( >:(
-
Why ever not? :-/
No worse than someone who hasn't contributed to the forum with 250 posts and can still stick for sale ads up through the back door. >:( >:( >:(
Ask admin, they draft the rules/guidelines
-
Wish I could afford that bumper, I could of got my old sponsors to copy it :(
-
Wish I could afford that bumper, I could of got my old sponsors to copy it :(
How would they copy it ??, do they make a mould if it?? how much would it cost to make the mould??
-
If anyone is interested in anything, please don't reply to me on here as I'm off due to stupid petty rules and won't be looking back in.
You are welcome to email me on pete_croft1@hotmail.com
Goodbye.
-
If anyone is interested in anything, please don't reply to me on here as I'm off due to stupid petty rules and won't be looking back in.
You are welcome to email me on pete_croft1@hotmail.com
Goodbye.
Rather naive thinking mate. They were put in place for a reason. :-X
-
If anyone is interested in anything, please don't reply to me on here as I'm off due to stupid petty rules and won't be looking back in.
Sorry you feel like that, but I have explained these are the current rules and the reasons for them in PMs, despite the abusive replies I received from you.
Its obviously your call if you wish to delete your account, leave it dormant, or stay.
-
Why ever not? :-/
No worse than someone who hasn't contributed to the forum with 250 posts and can still stick for sale ads up through the back door. >:( >:( >:(
As per PMs, we do not allow For Sale ads anywhere unless members have the required postcount. You have yet to show me one where we have allowed or missed one, yet this seems to be a major gripe you have :-/
-
If anyone is interested in anything, please don't reply to me on here as I'm off due to stupid petty rules and won't be looking back in.
You are welcome to email me on pete_croft1@hotmail.com
Goodbye.
Rather naive thinking mate. They were put in place for a reason. :-X
Generally, rules put in place for the benefit of the majority become stupid and petty when they do not meet the needs of the individual ;)
-
Wish I could afford that bumper, I could of got my old sponsors to copy it :(
How would they copy it ??, do they make a mould if it?? how much would it cost to make the mould??
Yeah, they would take the mould from the original bumper, I can look into costs and rights if you or OOF are interested?
-
Wish I could afford that bumper, I could of got my old sponsors to copy it :(
How would they copy it ??, do they make a mould if it?? how much would it cost to make the mould??
Yeah, they would take the mould from the original bumper, I can look into costs and rights if you or OOF are interested?
Needs to be a decent durable material. Fibers glass stuff just doesn't last ime.
-
Wish I could afford that bumper, I could of got my old sponsors to copy it :(
How would they copy it ??, do they make a mould if it?? how much would it cost to make the mould??
Yeah, they would take the mould from the original bumper, I can look into costs and rights if you or OOF are interested?
Needs to be a decent durable material. Fibers glass stuff just doesn't last ime.
Carbon Fibre :o
or Cadburys ? ;D
-
....
or Cadburys ? ;D
they're only interested in profits, so f sodd 'em! ::) ::) ::)
-
Wish I could afford that bumper, I could of got my old sponsors to copy it :(
How would they copy it ??, do they make a mould if it?? how much would it cost to make the mould??
Yeah, they would take the mould from the original bumper, I can look into costs and rights if you or OOF are interested?
I'd be intrested!!!
-
Wish I could afford that bumper, I could of got my old sponsors to copy it :(
How would they copy it ??, do they make a mould if it?? how much would it cost to make the mould??
Yeah, they would take the mould from the original bumper, I can look into costs and rights if you or OOF are interested?
Needs to be a decent durable material. Fibers glass stuff just doesn't last ime.
Carbon Fibre :o
or Cadburys ? ;D
Either! Cost will be similar I should imagine. ;D
Carbon fibre irmscher air dam... Hmmm. Strokes chin... Car is black...hmmm... 8-)
-
Now that would be
cool sub zero 8-) 8-)- and probably cost more than the car. ::)
-
in poland they use polyester composites
to mould them
front
(http://imageshack.us/photo/my-images/831/20110511181.jpg/
)
rear
http://imageshack.us/photo/my-images/135/20110511188.jpg/
skirts
http://imageshack.us/photo/my-images/27/01122009212.jpg/
all lot for just under 350£ +pp :)
-
Thats very interesting serek do they do them for the estate me wonders ::) :-?
-
waiting for a reply back on my end, the person I need to speak to is on holiday :)