Omega Owners Forum
Newbie Area => Newbie Welcome Area => Topic started by: seosamh on 12 October 2006, 20:15:21
-
hi everyone im new to this forum and pleased to join you all i used to log into vxon so i recognise some of the names..took me a while to find this site..good to be here although an omega novice i hope to learn from you guys...so heres my first problem started omega yesterday and it sounds like a tractor ,bumping /vibrating coming from black plastic housing in front and to left of plenum ,ive been told this is where the tensioners are and to change these and water pump....is that close to the mark try link below hopefully it leads u to a short video where u can hear whats going on...1999 2.5 cdx petrol 80000 miles {dealer assured me cambelt was done at 60000}.......thanks
http://mediamessaging.o2.co.uk/mms2legacy/showMessage2.do?encMmsId=B553E98E3D3A982F
-
Hi m8 and welcome to forum :y
-
hi everyone im new to this forum and pleased to join you all i used to log into vxon so i recognise some of the names..took me a while to find this site..good to be here although an omega novice i hope to learn from you guys...so heres my first problem started omega yesterday and it sounds like a tractor ,bumping /vibrating coming from black plastic housing in front and to left of plenum ,ive been told this is where the tensioners are and to change these and water pump....is that close to the mark try link below hopefully it leads u to a short video where u can hear whats going on...1999 2.5 cdx petrol 80000 miles {dealer assured me cambelt was done at 60000}.......thanks
http://mediamessaging.o2.co.uk/mms2legacy/showMessage2.do?encMmsId=B553E98E3D3A982F
Hello & welcome :)
That doesn't sound healthy to say the least, I wouldn't run it until you get it looked at!
-
Welcome to the forum seasamh. :y
If you post your problem in the Omega General Help section you will probably get a better response.
-
Welcome to the site :)
I reconise your name from the other site... ;)
-
Hi Seohsamh (?) and welcome
That does not sound well at all. Cambelt jumped a few teeth? Please do not run that again untill you have opened it up and had a look.
-
Hi Seohsamh and welcome :y
-
Welcome matey, good luck sorting the motor
-
Hi there seosamh and welcome to the site :y
-
Hello, And welcome to the forum 8-)
-
Hello & Welcome
-
Welcome to the site Seosamh :)
-
Welcome to the site - thats a sick sounding Omega, has the cambelt been done recently.....give us some more back ground to the car lets see if we can assist...