Omega Owners Forum
Newbie Area => Newbie Welcome Area => Topic started by: ragtopcav on 23 May 2007, 21:49:01
-
Just swinging by to say hi!
I've had an Omega for a couple of months now, just failed its MOT on some minor things and one biggie - a rear shock sprunk a leak on the way to the tester >:(.
It's a late 1997 estate, 2.5 CD manual. And I'm in the market for a pair of new dampers.
I'll have a dig around the board for recommendations; ttfn.
-
Welcome to the site :)
-
Welcome to the forum :y
-
Welcome ragtopcav :y
-
Hello & welcome :)
-
Hi and welcome :)
-
Welcome to the Forum m8 :y
-
Welcome ragtopcav :y
8-)
DaveL
-
Welcome to the forum :y
-
Hello and welcome :y
-
Hi & welcome :)
-
Just swinging by to say hi!
I've had an Omega for a couple of months now, just failed its MOT on some minor things and one biggie - a rear shock sprunk a leak on the way to the tester >:(.
It's a late 1997 estate, 2.5 CD manual. And I'm in the market for a pair of new dampers.
I'll have a dig around the board for recommendations; ttfn.
[smiley=evil.gif]Hope you get it sorted & welcome. :D
-
Hello and welcome to our forum :y
-
Hello and a warm welcome to the site :)
-
Cheers for the welcome.
Shocking update; my local Halfrauds supplied me a pair of H/D Monroe gassy thingybob dampers for less than a ton and instore within 24 hours - not bad for a national chain.
Whilst on the MOT topic, one of the other failures [not a surprise this one] was the handbrake operation; so if I'm going to pull the rotors for a mechanism overhaul why not new rotors? what the hell fronts too, with pads all around. Due to my choice of parts I now have front rotors and rear pads sat in the shed waiting for the appropriate rear rotors and front pads to turn up ::) such is...
-
A warm welcome to the forum! 8-) :y
-
Greetings and welcome aboard mate :y
-
Hello & Welcome :y
-
Howdoo and welcome. :y
-
Hello and Welcome to the site :y