Omega Owners Forum

Newbie Area => Newbie Welcome Area => Topic started by: mini1400 on 18 July 2007, 12:24:03

Title: Hi from Essex
Post by: mini1400 on 18 July 2007, 12:24:03

Found this forum while searching for a solution to a misfiring Elite. Looks like cam cover gaskets... Will be doing them this weekend after looking at the guide on here

Title: Re: Hi from Essex
Post by: Bo Bo on 18 July 2007, 13:02:53

Hello & welcome  :)

Title: Re: Hi from Essex
Post by: DaveL on 18 July 2007, 13:23:28

Pleased you found us, welcome to the forum. :y

 8-)
DaveL

Title: Re: Hi from Essex
Post by: Auto Addict on 18 July 2007, 13:31:59

Welcome to the forum :y

Title: Re: Hi from Essex
Post by: bob.dent on 18 July 2007, 14:29:52

Greetings and welcome aboard :y

Title: Re: Hi from Essex
Post by: Darth Loo-knee on 18 July 2007, 17:14:10

Hi and welcome to the site, glad the forum has helped :y

Title: Re: Hi from Essex
Post by: razzo on 18 July 2007, 18:19:23

Hi Mini1400 & welcome :y

Title: Re: Hi from Essex
Post by: Elite Pete on 18 July 2007, 18:53:15

Hi and welcome to the forum :)

Title: Re: Hi from Essex
Post by: amigov6 on 18 July 2007, 19:26:02

Quote

Hi and welcome to the forum :)

:DWelcome aboard Mini 1400. A few of us used to play with Minis many years ago.
     The a series gets a little "fragile" at that level of overbore. 1340 was good but you could get alot from a good 1293cc.
       I'm guessing you're into Minis, if not ignore everything bar the welcome aboard bit!!! ;D

Title: Re: Hi from Essex
Post by: TheBoy on 18 July 2007, 19:36:14

Welcome to the site :)

Good luck with the gasket change.

Title: Re: Hi from Essex
Post by: Cav9_4 on 18 July 2007, 20:18:21

Hi & welcome to the forum :y

Title: Re: Hi from Essex
Post by: Golfbuddy on 18 July 2007, 20:21:22

Welcome :)

Title: Re: Hi from Essex
Post by: Markie on 22 July 2007, 08:55:21

Hello and welcome to our forum  :y