Omega Owners Forum

Newbie Area => Newbie Welcome Area => Topic started by: Slushboxer on 11 July 2008, 14:59:06

Title: Delighted Newbie
Post by: Slushboxer on 11 July 2008, 14:59:06

Hi Everyone,
Amazed at the wealth of information on Omegas.Just wish I had found this site 2 years ago before I changed the cambelt on my V6 using two bent 4mm. nails and two wooden wedges.
Worked OK but required a lot of patience and time.
Thanks for  the info. on releasing the worm drive on the seat lifting motor. I was all set to unbolt the seats when I read your advice. Did the job in 2 minutes.

Title: Re: Delighted Newbie
Post by: Mr Skrunts on 11 July 2008, 15:09:58

Hi, welcome to the forum.  :y

Title: Re: Delighted Newbie
Post by: maria on 11 July 2008, 15:41:41

Hello and welcome to oof :y

Title: Re: Delighted Newbie
Post by: Jimbob on 11 July 2008, 16:37:52

Hello & Welcome  :y

Title: Re: Delighted Newbie
Post by: JueV6 on 11 July 2008, 16:43:52

Hi and welcome to the OOF :y :y

Title: Re: Delighted Newbie
Post by: psychnurse on 11 July 2008, 16:51:55

hello welcome!! thats an impesive cambelt change method  :y

Title: Re: Delighted Newbie
Post by: Field Marshal Dr. Opti on 11 July 2008, 17:18:01

hello and welcome to the forum ::)

Title: Re: Delighted Newbie
Post by: HolyCount on 11 July 2008, 17:37:48

Hello and welcome to OOFworld

Title: Re: Delighted Newbie
Post by: waspy on 11 July 2008, 17:56:31

Hi. A warm welcome  :)

Title: Re: Delighted Newbie
Post by: Elite Pete on 11 July 2008, 18:07:00

Hi and welcome to the forum :)

Title: Re: Delighted Newbie
Post by: Cav9_4 on 11 July 2008, 18:31:41

Hi & welcome to the forum :y

Title: Re: Delighted Newbie
Post by: Vamps on 11 July 2008, 19:30:42

Hello and welcome to the forum.  :y

Title: Re: Delighted Newbie
Post by: achoo81 on 11 July 2008, 20:09:15

Hi Slushboxer, welcome to the forum.

Title: Re: Delighted Newbie
Post by: HNO3GOH on 12 July 2008, 00:12:03

Hi and welcome to the forum. Nice to see more new members down this part of the world :y

Title: Re: Delighted Newbie
Post by: Dazzler on 12 July 2008, 09:42:13

Welcome to OOF,, enjoy the forum :)

Title: Re: Delighted Newbie
Post by: FRE07962128 on 12 July 2008, 10:09:55

Hello and a warm welcome to you :y

Title: Re: Delighted Newbie
Post by: Darth Loo-knee on 12 July 2008, 11:44:45

welcome to the forum :y

Title: Re: Delighted Newbie
Post by: mars on 12 July 2008, 13:03:48

Hello and welcome :y

Title: Re: Delighted Newbie
Post by: Entwood on 13 July 2008, 16:52:50

"Hello" and Welcome :)

Title: Re: Delighted Newbie
Post by: humbucker on 13 July 2008, 23:15:38

hello good evening and welcome!  :y

Title: Re: Delighted Newbie
Post by: albitz on 14 July 2008, 00:00:55

welcome to oof. if you did the cambelt without the proper locking kit your timing is almost certainly not quite right so you are probably down on power /fuel economy to some degree.might be worth looking into  :y

Title: Re: Delighted Newbie
Post by: Debs. on 14 July 2008, 07:47:34

 [smiley=vrolijk_26.gif] Hiya! [smiley=vrolijk_26.gif]

Title: Re: Delighted Newbie
Post by: Brian T on 14 July 2008, 12:52:42

Welcome to the OOF :y

Title: Re: Delighted Newbie
Post by: craig on 14 July 2008, 20:12:56

Hello and welcome to OOF :y

Title: Re: Delighted Newbie
Post by: TheBoy on 14 July 2008, 21:54:30

Welcome to the site

Title: Re: Delighted Newbie
Post by: johnnycboy on 15 July 2008, 01:31:26

welcome to oof :y

Title: Re: Delighted Newbie
Post by: Martin_1962 on 15 July 2008, 12:26:59

Hello & Welcome :y

Title: Re: Delighted Newbie
Post by: bob.dent on 15 July 2008, 15:24:30

Hi mate and welcome to OOF. :)

Title: Re: Delighted Newbie
Post by: MikeDundee on 16 July 2008, 07:38:12

Welcome to the Forum :y

Title: Re: Delighted Newbie
Post by: less on 16 July 2008, 22:03:45

Hi, welcome to the site  :y

Title: Re: Delighted Newbie
Post by: feeutfo on 17 July 2008, 20:03:49

Welcome to oof, far better than your dealer :y

Title: Re: Delighted Newbie
Post by: pete1666 on 18 July 2008, 22:40:30

DIY  :y OOf`s the way to go

Title: Re: Delighted Newbie
Post by: dbug on 18 July 2008, 22:44:35

Hello and welcome to OOF

Title: Re: Delighted Newbie
Post by: Myagemo on 19 July 2008, 20:00:07

Hello and welcome to the OOF

Title: Re: Delighted Newbie
Post by: BIGHUCK on 20 July 2008, 18:25:53

Quote

Hi Everyone,
Amazed at the wealth of information on Omegas.Just wish I had found this site 2 years ago before I changed the cambelt on my V6 using two bent 4mm. nails and two wooden wedges.
Worked OK but required a lot of patience and time.
Thanks for  the info. on releasing the worm drive on the seat lifting motor. I was all set to unbolt the seats when I read your advice. Did the job in 2 minutes.

WELCOME TO THE OOF  :y