Omega Owners Forum
Newbie Area => Newbie Welcome Area => Topic started by: holddy982 on 17 June 2009, 10:30:41
-
Hi Everyone. I have just bought my first Omega its a 01 plate v6, 2.6, CDX at first I thought I had got the bargain of the century at £500 until I noticed that 2 of the tyres were fitted anti-rotation so down I went to my local tyre/exhaust garage and they found front brakes were shot so new discs and pads were fitted then they found the exhaust was holed so a new exhaust from cats back,( they did show me the faulty bits )then I am replaceing the rear pads because they are down plus the HID light has gone out on the o/s so a new power unit is sent for and on top of this the cam cover gasket is leaking so there i go again, more expence, so all in all a bargain was not what I got...but saying all this at the end of it all, I will have one of the best cars Vauxhall has ever produced, then I'll be a happy bunny...Tony.
-
Hello & Welcome :y
Hope you enjoy your new purchase
hope the garage havent taken you for a ride with all that work!
-
Hello & Welcome!! [smiley=beer.gif]
-
Hello and welcome :y
-
Hi & welcome to the forum :y
-
Hello and Welcome, you will get a lot of the info here what you need.
-
hello and welcome :y
-
Welcome bud!
-
Hi Tony, welcome along :y :y
-
Hey there Tony. Welcome to the OOF :)
The fact that the tyres were fitted wrong doesn't make that much difference. I know it sounds daft, but it's true.
If anyone wants to try to say i'm wrong, then i'll gladly post up the reply i had from Michelin Tyres when i asked them the question ;)
-
Welcome to the forum :)
-
Hello Tony and a very warm welcome to you! :y
-
Ola, and a warm welcome to the forum.
varche
-
Hello and welcome :y
-
Hi and welcome to the forum
Andy :y
-
"Hello" and Welcome :)
-
Hello and welcome :y
-
Hello and welcome
-
welcome to the forum :y
-
Welcome to OOF mate :y
-
a warm welcome to the forum
-
Welcome to the forum :y :y
-
Hello there and welcome to the forum! There are plenty of friendly and knowledgeable people here to give tips/advice on jobs and quite a few breakers too who will be able to supply you with reasonably priced parts shoud you require! :y
-
Welcome to the Forum Tony :y
-
Hi and welcome to the forum. :y :y
-
Hello and welcome :y
-
Hello,and welcome to the Forum :y
-
Hi Tony and welcome to the forum ;)
-
Hi, welcome to the forum. :y
-
Hello and welcome to the forum..... :y
-
Welcome to OOF mate. Great bunch and full of Miggy knowledge :y
-
hello and welcome :y
-
Welcome to OOF matey