Omega Owners Forum

Newbie Area => Newbie Welcome Area => Topic started by: jimsin on 20 January 2010, 12:26:44

Title: belt fitting
Post by: jimsin on 20 January 2010, 12:26:44

what is the easiest way to fit a new belt after aux tensioner failure ;D :)

Title: Re: belt fitting
Post by: Shackeng on 20 January 2010, 12:40:28

Welcome to OOF Jim, help available on the General Help site. Try reposting there. :y

Title: Re: belt fitting
Post by: Mr Skrunts on 20 January 2010, 12:43:53

Hi, welcome to the forum.   :y

As Shackeng says, post in the other section with questions.   :y

Title: Re: belt fitting
Post by: waspy on 20 January 2010, 13:07:47

How do & welcome :y :y

Title: Re: belt fitting
Post by: Entwood on 20 January 2010, 13:07:51

"Hello" and Welcome :)

Been several recent threads about this in "General Help" ... just one bracket to undo and the tensioner to loosen

20 minutes max .. :)

Title: Re: belt fitting
Post by: Ken L on 20 January 2010, 13:19:24

Welcome to the forum Jimsin

Title: Re: belt fitting
Post by: Jimbob on 20 January 2010, 13:21:57

Hello & Welcome  :y

Title: Re: belt fitting
Post by: Elitenut on 20 January 2010, 13:58:48

Hello and welcome to the Forum. :y :y

Title: Re: belt fitting
Post by: Dishevelled Den on 20 January 2010, 14:05:07

Welcome along J   :y :y

Title: Re: belt fitting
Post by: dbug on 20 January 2010, 15:52:45

Welcome to OOF mate :y

Title: Re: belt fitting
Post by: p j morgan on 20 January 2010, 16:01:48

welcome to the forum :y

Title: Re: belt fitting
Post by: Welung666 on 20 January 2010, 16:08:50

Welcome to OOF Jim :y

Title: Re: belt fitting
Post by: PhilRich on 20 January 2010, 16:53:33

Hi & welcome mate :y

Title: Re: belt fitting
Post by: sexydaz on 20 January 2010, 17:45:52

howdo :y

Title: Re: belt fitting
Post by: Stevie-blunder on 20 January 2010, 18:38:23

Hi Jim, welcome to OOF  :y

Title: Re: belt fitting
Post by: R.C. ™ on 20 January 2010, 18:57:24

Hello and welcome to the forum  :y

Title: Re: belt fitting
Post by: mars on 20 January 2010, 20:39:40

Hello and welcome :y

Title: Re: belt fitting
Post by: TheBoy on 20 January 2010, 21:46:13

Welcome :)

If just pulley, just replace that. If entire tensioner, held on with 2 E14 torx

Title: Re: belt fitting
Post by: Cliffo B on 20 January 2010, 23:53:20

Hello,welcome to the Forum :y

Title: Re: belt fitting
Post by: black beauty on 21 January 2010, 14:34:26

Hello and welcome to the forum :)

Title: Re: belt fitting
Post by: Dave Elite on 23 January 2010, 19:04:43

Hi, Welcome to the forum

Title: Re: belt fitting
Post by: sandune on 23 January 2010, 19:44:30

Hi welcome :y