Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: mar892ree on 13 July 2006, 14:50:36

Title: 2.2 exhaust manifold removal !
Post by: mar892ree on 13 July 2006, 14:50:36
Afternoon , one and all !

Anyone removed a 2.2 exhaust manifold yet !
Idealy a " how to " would be great, but all i really need to know is everything workable / accessable if studs break ! Can a normal drill be used etc etc
Cheers

Mark
Title: Re: 2.2 exhaust manifold removal !
Post by: nixoro on 13 July 2006, 15:03:48
I think the manifold replacement is similar to my 2.0

Picture is of the 2.2 engine.

(http://i41.photobucket.com/albums/e261/nixoro/RCBreather2.jpg)

Remove the heatshield. (3x star bolts)

Then from underneath, the cat to manifold join is held together by 4 bolts. (13mm socket on mine)

Then remove the 10 bolts to the manifold and the manifold should be able to be lifted out. (13mm socket on mine)

If a stud was to break space is limited but if you can get your hands on a right angled drill that may help.

HTH
Title: Re: 2.2 exhaust manifold removal !
Post by: Marks DTM Calib on 13 July 2006, 15:56:37
Soak the studs well the night before with good penetrating fluid.