Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: boss on 13 July 2006, 13:22:30
-
Right my seats all work ok, but I'm at a loss as how to use the actual memory part??
It seems that I cant save the seat and mirror settings or recall them??
Ideas anyone? Is there a trick to this?
-
The seat and mirror position is stored by pressing the M button and one of the number buttons together
-
Set up seat and when happy just press the M and either the 1,2, or 3 button, for a couple of seconds.
That should remember you position till it is overwritten.
But I presume you have done this already, and it doesn't work!
-
and to recall, you have to press AND HOLD the associated button you stored it under...
-
But I presume you have done this already, and it doesn't work!
Yep have done this......as it says in the owners manual.
I see from the wiring diagrams that the exterior mirrors, interior mirror and seats are all wired through an ecu of some sorts.
As all functions but the memory work, could the fault be with the ecu/memory part?
-
Its possible but, it could also be the permanent live feed at fault resulting in altsiemers
-
Its possible but, it could also be the permanent live feed at fault resulting in altsiemers
Mark, you've forgotten how to spell. Must be your alzheimers...
-
Its coz we dont have a spell checker on here!
-
What actually happens when you press one of the memory positions?
-
This happens
(http://i700.photobucket.com/albums/ww7/martinthrapston/image_zps103f8cfe.jpg) (http://s700.photobucket.com/user/martinthrapston/media/image_zps103f8cfe.jpg.html)
-
Trying moving the seat to a completely random position and then press and hold one of the number buttons...
I suspect you have saved the same position in all three memories, and unless you move the seat out of position, nothing will happen because the seat is already in the stored position :y