Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Markjay on 29 September 2006, 23:28:41

Title: ESP for EPC
Post by: Markjay on 29 September 2006, 23:28:41

As we all know there is a piece of software called Electronic Parts Catalogue (EPC) that none of us has (obviously) as it is Vx only. However it has been brought to my attention that some people here posses paranormal telepathy powers that allow them to read data from remote computer system. Now please read this list:

For Omega 2.6 Autobox AR25:
Main sump gasket
Small sump gasket
Drain plug washer
Autobox filter

If you have managed to guess what I am about to do, then you are obviously one of these psychics – so could you please get your mind to wonder into the computer of the nearest Vx dealer and fish-out the Part Numbers for these items. Many thanks!

PS – My own paranormal telepathy powers don’t work (http://img154.imageshack.us/img154/2281/image016fk8.gif) (http://imageshack.us)

Title: Re: ESP for EPC
Post by: Auto Addict on 30 September 2006, 07:57:42

Going to have a go at your auto box MJ, pics and a how to please.

Will be in touch shortly regarding the other matter.

Title: Re: ESP for EPC
Post by: Kev on 30 September 2006, 09:16:40

Quote

PS – My own paranormal telepathy powers don’t work

Mines stopped working too, right after i installed XP x64. It would appear that some of these 'telepathy' programs don't seem to like this 64 Bit OS very much.  ::)

Title: Re: ESP for EPC
Post by: Markjay on 30 September 2006, 18:53:06

Quote

Going to have a go at your auto box MJ, pics and a how to please.

Well if you are considering it as well, you could offer to host the next autobox oil change party on your drive...  ;D

Title: Re: ESP for EPC
Post by: Marks DTM Calib on 30 September 2006, 18:58:08

An option is to clean the filter and use Loctite 598 (availabel from Halfrauds) instead of the gaskets.....works very well and is how I did mine!

Title: Re: ESP for EPC
Post by: Markjay on 30 September 2006, 20:06:17

Quote

An option is to clean the filter and use Loctite 598 (availabel from Halfrauds) instead of the gaskets.....works very well and is how I did mine!

Sounds good, thanks - as for the filter, I was thinking that if it's not too expensive then I'll just get a new one instead of bothering with clearing the old one - does anyone know how much a new filter is? If it was a tenner or so I’d probably just get a new one.

Title: Re: ESP for EPC
Post by: Marks DTM Calib on 30 September 2006, 20:25:28

Try 40 quid.....

Title: Re: ESP for EPC
Post by: Markjay on 30 September 2006, 21:03:57

Quote

Try 40 quid.....

Ouch.....

Title: Re: ESP for EPC
Post by: Kev on 30 September 2006, 21:16:42

Quote

Quote

Try 40 quid.....

Ouch.....

That's not too bad, it's not something you're going to do annually.  ::)

Title: Re: ESP for EPC
Post by: rpont on 30 September 2006, 21:22:43

Quote

An option is to clean the filter and use Loctite 598 (availabel from Halfrauds) instead of the gaskets.....works very well and is how I did mine!

How much is Loctite 598? I believe the gaskets are only about a tenner.

Title: Re: ESP for EPC
Post by: sounds2k on 03 October 2006, 18:28:52

Main sump gasket - p/n 96014234
Small sump gasket - p/n 96014235
Drain plug washer - p/n 11023582 - would be 1638257 but that's discontinued, advises to use p/n 96041338 but that's the plug  ::))
Autobox filter - p/n 96015432

now I must go lie down after all that mental exertion!!

Title: Re: ESP for EPC
Post by: Markjay on 03 October 2006, 21:11:17

Quote

Main sump gasket - p/n 96014234
Small sump gasket - p/n 96014235
Drain plug washer - p/n 11023582 - would be 1638257 but that's discontinued, advises to use p/n 96041338 but that's the plug  ::))
Autobox filter - p/n 96015432

now I must go lie down after all that mental exertion!!

Many thanks! Most illuminating.