Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Sir Sideways on 17 October 2006, 20:42:02

Title: Part Number Required
Post by: Sir Sideways on 17 October 2006, 20:42:02
Does anyone have the part number for the 4 pin brake switch please for cruise comtroll? I have the module and stalk fitted so i just need the switch and hopefully not needing a tech 2 (fingers crossed).

Many thanks

Jim
Title: Re: Part Number Required
Post by: Marks DTM Calib on 17 October 2006, 20:55:00
You wont need tech 2........you can do it with a small SPDT relay......
Title: Re: Part Number Required
Post by: Sir Sideways on 17 October 2006, 20:59:17
Whats an spdt relay? sorry for sounding stoopid
Title: Re: Part Number Required
Post by: Marks DTM Calib on 17 October 2006, 21:12:01
SPDT = Single Pole Double Throw.....
Title: Re: Part Number Required
Post by: CaptainZok on 17 October 2006, 21:49:45
A little bird tells me you might be looking for,

 SWITCH,STOP LAMP (FOR CRUISE CONTROL)  X30XE       9149766    
Title: Re: Part Number Required
Post by: TheBoy on 17 October 2006, 22:03:08
Switch is around £11 IIRC. As Mark has already said, no Tech2 required - its plug and plug on the non drive-by-wires...
Title: Re: Part Number Required
Post by: sounds2k on 17 October 2006, 22:48:46
shouldn't that be plug and pray, I mean play  ;) ;D
Title: Re: Part Number Required
Post by: TheBoy on 17 October 2006, 22:51:01
Quote
shouldn't that be plug and pray, I mean play  ;) ;D
Yeah, that as well...

..damn Stella  [smiley=beer.gif]
Title: Re: Part Number Required
Post by: Sir Sideways on 18 October 2006, 20:26:25
Thank you very much Captainzok  :y.  Is this the same number for the auto?

Plug and Pray defo lol
Title: Re: Part Number Required
Post by: Sir Sideways on 30 October 2006, 19:41:09
Jus to let you know, i've jus fitted the brake switch and cruise is working perfectly. no need for Tech 2, all the praying payed off lol

Big Thanks to Captainzok for the number (I owe u a pint)

Jim
Title: Re: Part Number Required
Post by: TheBoy on 30 October 2006, 19:43:55
Quote
Jus to let you know, i've jus fitted the brake switch and cruise is working perfectly. no need for Tech 2, all the praying payed off lol

Big Thanks to Captainzok for the number (I owe u a pint)

Jim
only the FBWs that need Tech2....