Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: ANDY8 on 05 November 2006, 21:52:32

Title: limited edition 3.0 barbie mv6
Post by: ANDY8 on 05 November 2006, 21:52:32

This is for the limited edition 3.0 barbie mv6

Place your bids please :D

http://cgi.ebay.co.uk/OMEGA-V6-3-0-LTR-PLENUM_W0QQitemZ140046702579QQihZ004QQcategoryZ10404QQrdZ1QQcmdZViewItem

Title: Re: limited edition 3.0 barbie mv6
Post by: Chopsdad on 05 November 2006, 22:04:23

Very pretty  :D but too big for my 2.2

Title: Re: limited edition 3.0 barbie mv6
Post by: Admin on 06 November 2006, 10:59:39

The seller could be on to something there...

Customise your plenum....just hope he used a decent high temp paint. :)

Title: Re: limited edition 3.0 barbie mv6
Post by: Markie on 06 November 2006, 11:10:54

saw this recently too - this one is actually a relist - last time it didnt sell
one of the pictures shows the paint on left hand side is pretty bad....

but i did think about doing this in silver to the spare plenum i have in high temp silver paint  :o

Title: Re: limited edition 3.0 barbie mv6
Post by: Phil on 06 November 2006, 19:29:51

This gets done alot on Vectra/ Cav V6s

Powder coating is the way to do it properly, hence why i have a spare plenium in my shed  :)

Title: Re: limited edition 3.0 barbie mv6
Post by: MikeDundee on 06 November 2006, 20:02:41

Wrong one for my car otherwise may have been interested