Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Omega111 on 15 December 2006, 20:10:33
-
Can i expect to pay for a complete exhaust for my 98 2.5 v6?
Thanks
-
Can i expect to pay for a complete exhaust for my 98 2.5 v6?
Thanks
If its a saloon
Exhaust silencer and centre pipes RH £107
Ditto LH..........................................£104
Exhaust silencer and tail pipes....£114
Cat dunno sorry
Thats vx retail prices and + vat
-
Can i expect to pay for a complete exhaust for my 98 2.5 v6?
Thanks
If its a saloon
Exhaust silencer and centre pipes RH £107
Ditto LH..........................................£104
Exhaust silencer and tail pipes....£114
Cat dunno sorry
Thats vx retail prices and + vat
sorry m8 yes its a saloon! anyone know how much difference a trade card would make?
-
if you are replacing it then also make sure that you get 4 bolts for the centre boxes to the cats, a few spring clips for the mounts as there will be a few that are corroded or break when you remove them and two clamps rear box to centre box. The rubber mounts should be o.k. though
The centre box to cat bolts are a real pain to get out. Some on here have resorted to heating/freezing etc. I guess I was lucky as I used loads of freeing oil over 2 days with gentle working of the bolts loose.
-
Also, forgot to say that if you argue a bit you should get 10% off the retail price, TC discount should be more
-
From memory, Trade Club is around 70% of the price on these items...
If you are tempted to go for pattern parts, be aware it will be much noisier...
-
If you are tempted to go for pattern parts, be aware it will be much noisier...
Please explain m8 i have no ideal apart from the noise lol
-
If you are tempted to go for pattern parts, be aware it will be much noisier...
Please explain m8 i have no ideal apart from the noise lol
Basically pattern parts (non GM) are not made as well, in particular exhausts. geniune Vauxhall exhausts are well made and double walled, if you go to a place like Kwik Fit they will put on a nasty tin crap which will sound awful.
People here have pattern part exhaust fitted on their cars by previous owners, they are noticebly louder than the GM versions. It will sound rougher and noiser....
I fitted a geniune GM zorst to my megga, its super silent now :)
-
Thanks m8 :y
-
Yes, the GM ones (although usually made by same manufacturer as pattern ones - eg 2.2 GM ones are made by Bosal, but to a much higher standard than the Bosal you get from Kwik Fit) are much higher quality, hence quieter and better longevity...