Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: infinity1 on 05 January 2007, 17:47:58
-
right lads on the passenger side ,the visor flap when i open it just seems to fall off! so i have undone the screws that secure it to the roof of the car,just to see if i can repair it,but it is connected inm the top left,by a thin wire,that i presume is the power source for the light.now i just cannot release this connector(?)thats on the visor to take the whole visor off,is there another way round it? all i can see is this wire and this one connector holding it on,any ideas,or will i be forced to get the tin snips out..... :'(
-
Sorry I can't help - I don't use the vanity mirror very often so don't know how it works ;D
-
I'm constantly checking my 'look' in the mirror. But this has nothing to do with the solution.
If there's a connector, it can be disconnected!
Put a piccy up and we'll have a go. It wouldn't be the first time we'd come across a Krypton Factor connector!
-
It wouldn't be the first time we'd come across a Krypton Factor connector!
Remember my 2.2 throttle body connector?
-
That's the one I meant AA!
-
They normaly join the main loom by the couretsy light.......check here for the connector.
-
cheers mark, does the light just pop out so to speak????
-
cheers mark, does the light just pop out so to speak????
The centre courtesy light just pops out - quite tight, and the spring clips are strong... ...you should be able to see 4 small slots near each corner where you can get a prise (this is also about where it clips), but its easy to damage trim...
-
I don't remember a connector in there. But I do remember seeing the loom teeing off in both directions!
(http://i9.photobucket.com/albums/a59/Hillper/IMG_2081.jpg)
-
I'm constantly checking my 'look' in the mirror. But this has nothing to do with the solution.
;D ;D ;D ;D ;D ;D ;D ;D