Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: v6 cdx on 19 January 2007, 22:13:27

Title: heater not hot
Post by: v6 cdx on 19 January 2007, 22:13:27

my heater is blowing luke warm air i have tried rad flush but i think i may need a new little rad as the inlet is hot and the outlet is warmish has anyone had to replace there heater matrix and is it very difficult or should i pay for someone else to fit it

Title: Re: heater not hot
Post by: TheBoy on 19 January 2007, 22:21:36

Quote

my heater is blowing luke warm air i have tried rad flush but i think i may need a new little rad as the inlet is hot and the outlet is warmish has anyone had to replace there heater matrix and is it very difficult or should i pay for someone else to fit it

The heater matrix?  Its a pig of a job. Not one I have had to do thankfully.

Rule out air lock, and possible flush with hosepipe?

Title: Re: heater not hot
Post by: Matchless on 19 January 2007, 23:18:44

CDX so full climate control?

Synchronise the servos by holding auto and off down at same time for a few seconds, servo motors should be heard to whirr for a bit then see if any better.

If still cold then it could be blocked heater...flush with hose, or a faulty heater bypass valve (or vacuum feed to valve)