Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Chopsdad on 24 January 2007, 23:08:52

Title: Torque settings for front wishbone bolts?
Post by: Chopsdad on 24 January 2007, 23:08:52

Anyone know the correct Nm?

Title: Re: Torque settings for front wishbone bolts?
Post by: sounds2k on 25 January 2007, 00:08:01

120 Nm
plus 30°
plus 15°

Title: Re: Torque settings for front wishbone bolts?
Post by: Chopsdad on 25 January 2007, 00:12:24

Quote

120 Nm
plus 30°
plus 15°

Thanks for that... I can get off to bed now  :y

Title: Re: Torque settings for front wishbone bolts?
Post by: Markjay on 25 January 2007, 00:25:31

Quote

Quote

120 Nm
plus 30°
plus 15°

Thanks for that... I can get off to bed now  :y

To bed??? Now that you have the correct settings? no no no, just go out there and get it done...  ;D

Title: Re: Torque settings for front wishbone bolts?
Post by: Matchless on 25 January 2007, 17:48:28

Make sure you tighten them with the wheels on the ground, if you havnt got ramps or a pit there isnt room to get a torque wrench in so nip up v.tight with ring spanner then jack up for final torque and angle tighten.