Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Essex_Andy on 02 February 2007, 20:49:32

Title: yes another camshaft related question
Post by: Essex_Andy on 02 February 2007, 20:49:32

Just going through my tools and sockets and I dont have anything that will surfice as a drift for the camshaft oil seals....

Any suggestions fellas?

Title: Re: yes another camshaft related question
Post by: JamesV6CDX on 02 February 2007, 21:10:01

Get a socket, at a guess over 30mm....

Title: Re: yes another camshaft related question
Post by: Essex_Andy on 02 February 2007, 21:42:28

largest I have is 1 1/4 inch and thats too small....mind you I have since found some thick wall pipe that will do but I can draw a straight line but bloody cant saw one!!!!

Title: Re: yes another camshaft related question
Post by: Marks DTM Calib on 04 February 2007, 09:20:01

You dont need one......you can easily fit the seal to the cams (lube it with oil) and then drop the asembly in....fit the bearing cap and jobs a good un...