Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: OMEGA VXR on 19 March 2007, 13:23:18
-
Hi all
Could anyone help me?
I want to know if the front wings for the omega are exactly the same throughout the range of manufacter from 1994 to 2003 if they are different could you specify.
thanks
Also the the lumber supports on my drivers leather seat dont work ie they just turn and turn is there anything i could to fix it?
Thanks
Lee
-
Front wings same throughout the range.
I guess you need to strip seat to see whats bust...
-
Front wings same throughout the range.
I guess you need to strip seat to see whats bust...
I thought they changed on the facelift....
To compare (borrowed gallery pics)
jamie's Facelift MV6:
http://www.iecd.co.uk/ScratchPad/temp/MV6_SIDE.JPG
Chris CD pre-facelift:
http://www.omegaowners.com/forum/YaBB.pl?num=1173534420
Notice the door line, on the facelift its curved on pre-facelift its straight.
-
Front wings same throughout the range.
I guess you need to strip seat to see whats bust...
I thought they changed on the facelift....
To compare (borrowed gallery pics)
jamie's Facelift MV6:
http://www.iecd.co.uk/ScratchPad/temp/MV6_SIDE.JPG
Chris CD pre-facelift:
http://www.omegaowners.com/forum/YaBB.pl?num=1173534420
Notice the door line, on the facelift its curved on pre-facelift its straight.
10 WING, FRONT, RH (NLS.- USE 90511521 , 90493313 ) R1000001- S1002123 (90491587)
10 WING, FRONT, RH S1002124- 90511521
11 WING, FRONT, LH (NLS.- USE 90511520 , 90493312 ) R1000001- S1002123 (90491586)
11 WING, FRONT, LH S1002124- 90511520
;)
-
Front wings same throughout the range.
I guess you need to strip seat to see whats bust...
I thought they changed on the facelift....
To compare (borrowed gallery pics)
jamie's Facelift MV6:
http://www.iecd.co.uk/ScratchPad/temp/MV6_SIDE.JPG
Chris CD pre-facelift:
http://www.omegaowners.com/forum/YaBB.pl?num=1173534420
Notice the door line, on the facelift its curved on pre-facelift its straight.
Not true. The Catera (97-01) covers both pre and facelift. According to GM Parts Cheap the fenders are the same for all model years.
http://www.trademotion.com/partlocator/index.cfm?action=getLocator&siteid=214240&chapter=DR1BK97&appSectionid=2399&groupid=51836&subgroupid=2399&componentid=0&make=5&model=Catera&year=2001&graphicID=BK97070&callout=1&catalogid=2
Elvin
-
Front wings same throughout the range.
I guess you need to strip seat to see whats bust...
I thought they changed on the facelift....
To compare (borrowed gallery pics)
jamie's Facelift MV6:
http://www.iecd.co.uk/ScratchPad/temp/MV6_SIDE.JPG
Chris CD pre-facelift:
http://www.omegaowners.com/forum/YaBB.pl?num=1173534420
Notice the door line, on the facelift its curved on pre-facelift its straight.
Not true. The Catera (97-01) covers both pre and facelift. According to GM Parts Cheap the fenders are the same for all model years.
http://www.trademotion.com/partlocator/index.cfm?action=getLocator&siteid=214240&chapter=DR1BK97&appSectionid=2399&groupid=51836&subgroupid=2399&componentid=0&make=5&model=Catera&year=2001&graphicID=BK97070&callout=1&catalogid=2
Elvin
In UK, the bumpers did change around 2000, but the wings remained the same...
-
must be an optical illusion then cause i could have sworn they look different.
-
must be an optical illusion then cause i could have sworn they look different.
Good job you didn't bet money or a gonad on it.... ;)
-
must be an optical illusion then cause i could have sworn they look different.
More than likely my dodgy photo taking skills than your eyesight!
-
;D ;D ;D :-[
-
Lumbar support, Is your knob spinning, it could be simply that... THIS COMMENT IS MEANT TO BE A CLEAN ONE...OK! Try a knob transplant from a scrap car, ;D ;D ;D ;D ;D ;D ;D ;D :-[ :-[ :-[
-
Ive been doing a bit of digging and i have found that the wings are in fact different, i rang a couple of VX dealers this morning... waste of time!! they didnt know, but they did tell me that all the wings part numbers have been superseeded, they only go on one part no. now,a few years ago there went on seperate part numbers.(chassis no)
Ive also looked at some pictures in total vauxhall mag and it shows early omegas 1994-1998 have no gap between the bottom of the wing and the plastic sill cover, later omegas 1999-2003 have a gap which then i assume also that the sill covers are different aswell.
My omega is a 94 model (no gap)my friends is a 02 model (with a gap) sorry no pics!
I hope you can understand what i mean!!
Thanks
Lee
-
Ive been doing a bit of digging and i have found that the wings are in fact different, i rang a couple of VX dealers this morning... waste of time!! they didnt know, but they did tell me that all the wings part numbers have been superseeded, they only go on one part no. now,a few years ago there went on seperate part numbers.(chassis no)
Ive also looked at some pictures in total vauxhall mag and it shows early omegas 1994-1998 have no gap between the bottom of the wing and the plastic sill cover, later omegas 1999-2003 have a gap which then i assume also that the sill covers are different aswell.
My omega is a 94 model (no gap)my friends is a 02 model (with a gap) sorry no pics!
I hope you can understand what i mean!!
Thanks
Lee
EPC only lists one (current) part.
-
Lumbar support, Is your knob spinning, it could be simply that... THIS COMMENT IS MEANT TO BE A CLEAN ONE...OK! Try a knob transplant from a scrap car, ;D ;D ;D ;D ;D ;D ;D ;D :-[ :-[ :-[
;D ;D ;D