Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: james171271 on 22 March 2007, 09:48:21

Title: 1998 pre facelift 2.5v6 cdx pipe locations help
Post by: james171271 on 22 March 2007, 09:48:21

i have looked all over the forums and cannot find information on pipe locations even the haynes book dosent help much is there anyone in bradford with a v6 i could look at there vac pipes set up ?or could someone please confirm which pipe goes to the fuel pressure regulator any help please  :y

Title: Re: 1998 pre facelift 2.5v6 cdx pipe locations hel
Post by: Marks DTM Calib on 22 March 2007, 09:53:40

Fuel pressure reg pipe is easy....its a thin branch pipe which comes from the considerably fatter one that attaches to the nose of the idle valve and the inlet trunking and runs down the passenger side cam cover......

For the vac pipes look in the maintenance section....there is a guide in there

Title: Re: 1998 pre facelift 2.5v6 cdx pipe locations hel
Post by: ClarCE on 22 March 2007, 10:04:13

Quote

Fuel pressure reg pipe is easy....its a thin branch pipe which comes from the considerably fatter one that attaches to the nose of the idle valve and the inlet trunking and runs down the passenger side cam cover......

For the vac pipes look in the maintenance section....there is a guide in there

I've just replaced that very same pipe myself:

Its marked here, the bit thats "splitting away" is the branch pipe that mark is talking about.

(http://i164.photobucket.com/albums/u24/ClarCE/26022007146.jpg)